i think i read somewhere that the automatic tranny in the g8 gxp is set to shift at 6600 rpm at wot. For those of you with the auto GXP, is this true?
i think i read somewhere that the automatic tranny in the g8 gxp is set to shift at 6600 rpm at wot. For those of you with the auto GXP, is this true?
Custom Dyno Tune By Brian at Kaltech Tuning and Performance
[/FONT][/B]
Vararam Cold-Air Intake
1 7/8 Long tube American Racing Headers
Custom Cam from Comp Cams
CNC Valve Job from Livernois
VMS HSRK
160 T-Stat
2800 Circle-D Stall Converter
435rwhp 385rwtq Mustang Dyno
Coming Soon:Some Tires Bitch!
*SOLD
NEW CAR
2014 Shelby GT500
*STOCK*
http://i278.photobucket.com/albums/k...ps9cf68c12.jpg
Anybody? Theres a more important reason behind this question than pure curiousity lol
Custom Dyno Tune By Brian at Kaltech Tuning and Performance
[/FONT][/B]
Vararam Cold-Air Intake
1 7/8 Long tube American Racing Headers
Custom Cam from Comp Cams
CNC Valve Job from Livernois
VMS HSRK
160 T-Stat
2800 Circle-D Stall Converter
435rwhp 385rwtq Mustang Dyno
Coming Soon:Some Tires Bitch!
*SOLD
NEW CAR
2014 Shelby GT500
*STOCK*
http://i278.photobucket.com/albums/k...ps9cf68c12.jpg
I don't have my laptop with me to look at a A6 GXP file. If I'm not mistaken, i think the fuel cut happens at 6600 so maybe the shifts are slightly lower. Hopefully some other HPT/EFI user will chime in.
You trying to match shift points?
On the manual the fuel cutoff is 6600 so, like stated above, I would estimate the shift is earlier....maybe 6400 or so.
SOLD: 2009 Maverick Silver G8 GXP M6
Current Vehicle: 1984 Chevy K10 (it's red and redneck)
New Vehicle: 1972 2wd K5 Blazer. It's being built right now. Link to the build is HERE
You cannot strengthen the weak by weakening the strong. You cannot help the wage earner by pulling down the wage payer. You cannot help the poor by destroying the rich. You cannot help men permanently by doing for them what they could and should do for themselves.
- John Henry Boetcker
Problem is we cant get the tranny to shift were we want it to at WOT. No matter what we command it to do, it always shifts early. Other people have problems bouncing off the rev limiter, I have the opposite problem. Been having this problem for a long time
Custom Dyno Tune By Brian at Kaltech Tuning and Performance
[/FONT][/B]
Vararam Cold-Air Intake
1 7/8 Long tube American Racing Headers
Custom Cam from Comp Cams
CNC Valve Job from Livernois
VMS HSRK
160 T-Stat
2800 Circle-D Stall Converter
435rwhp 385rwtq Mustang Dyno
Coming Soon:Some Tires Bitch!
*SOLD
NEW CAR
2014 Shelby GT500
*STOCK*
http://i278.photobucket.com/albums/k...ps9cf68c12.jpg
SOLD: 2009 Maverick Silver G8 GXP M6
Current Vehicle: 1984 Chevy K10 (it's red and redneck)
New Vehicle: 1972 2wd K5 Blazer. It's being built right now. Link to the build is HERE
You cannot strengthen the weak by weakening the strong. You cannot help the wage earner by pulling down the wage payer. You cannot help the poor by destroying the rich. You cannot help men permanently by doing for them what they could and should do for themselves.
- John Henry Boetcker
Yeah I saw it. I sent a link to my topic to my tuner for him to check out. The technical stuff like that i don't really understand. Mostly because I don't have hptuners so don't really know how its laid out or anything. Other G8's he has tuned didn't have this problem, and at one point I had the VMS tune, and that didn't fix the problem either. When we had the car set to shift at 6000, it would shift around 5500/5600. When we set it to 6200, it would shift at 5800. Now we have it set to shift at 6500, and its shifting around 6200. We can't figure out why. BUT very occasionally, it will shift were it is supposed to. I'm talking like 1 in 1000 but I don't want to set it to shift really high just to get it to shift were I want because of that occasional time it does shift were we tell it to.
Custom Dyno Tune By Brian at Kaltech Tuning and Performance
[/FONT][/B]
Vararam Cold-Air Intake
1 7/8 Long tube American Racing Headers
Custom Cam from Comp Cams
CNC Valve Job from Livernois
VMS HSRK
160 T-Stat
2800 Circle-D Stall Converter
435rwhp 385rwtq Mustang Dyno
Coming Soon:Some Tires Bitch!
*SOLD
NEW CAR
2014 Shelby GT500
*STOCK*
http://i278.photobucket.com/albums/k...ps9cf68c12.jpg
Try adjusting shift points by MPH. In manual mode turn all the mphs to 0 and then set the points by rpm.
2008 Liquid Red Pontiac G8 Sport/Premium - Adams Polishes - American Racing Headers - ARP - BMR Fabrication - Circle D Specialties - COMP Cams - Crazy Paul - Dynojet - Earl's - Flowmaster - Fuel Air Spark Technology - G2 - GFORCE 1320 - Greg Weld - HP Tuners - JBA - Lingenfelter - Maverick Man Carbon - Metco Motorsports Solutions - Mickey Thompson - M&H - Mike Norris Motorsports - NGK - Pace Performance - Pedders USA - Powerbond - PSI - Russell - SBX Performance - SJM Manufacturing - SPOHN Performance - Tony Mamo - Vararam - Vector Motorsports - Wretched Motorsports - 470 RWHP 427 TQ - Engine Tune By Patrick G
Custom Dyno Tune By Brian at Kaltech Tuning and Performance
[/FONT][/B]
Vararam Cold-Air Intake
1 7/8 Long tube American Racing Headers
Custom Cam from Comp Cams
CNC Valve Job from Livernois
VMS HSRK
160 T-Stat
2800 Circle-D Stall Converter
435rwhp 385rwtq Mustang Dyno
Coming Soon:Some Tires Bitch!
*SOLD
NEW CAR
2014 Shelby GT500
*STOCK*
http://i278.photobucket.com/albums/k...ps9cf68c12.jpg
Tuning the WOT shift points is a nightmare once your car goes above stock HP levels. You have to set MPH as well as RPM and both conditions have to be met before it will shift. Often setting the RPM about 200-300 below where you want it and adjusting the MPH will work. Yours is totally opposite the issue many of us have had so I expect your MPH is just not set right.
Is your car being tuned by a local guy? Is he using the beta version of HPTuners? The beta version has a lot more A6 parameters than the release version.