-
21" Camaro SS wheels for $65
Anyone see these on pace performance? Crazy cheap and the offsets look right. Not my style with that thin a tire, but someone would like 'em.
I'll dig up the link later.
-
VIP Member
http://paceperformance.com/i-1308601...d-5-spoke.html
Looks like they got different sizes at the same price.
I agree the g8 needs big tires to look right but I hate big wheels. I think if you were into big wheels you could have a fair sized tire on them.
-
Originally Posted by
BuildItYourSelf
Really, I think the sidewall on my 19's is pushing it? I can't imagine another 2" of wheel.
I'm sure someone has 21's on here.
-
My 19's make the car ride like an F'ing hay wagon so I can't imagine 21's. Our roads are $HIT around here and my car is pretty stiff with all the poly. It doesn't help that I'm used to my DD which is a 4x4 RAM with 4 corner air suspension. 
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
-
My 2016 Camaro 20's ride better than my 18's did with the potenzas
-
Originally Posted by
6 litre
My 2016 Camaro 20's ride better than my 18's did with the potenzas
What specs are your 2016 camaro-rims i just picked a set up but test fitring with the 8.5x20 25mm offset and 9.5x20 39mm offset phts them flush wth the edge of the fender.what tires size do you have. Thanks20160530_163434.jpg
-
I looked at these wheels for the wife's Camaro. Nice price on the wheels, unfortunately there seems to be only one manufacturer of the right size tire, Pirelli. They want $500 a piece for the tires! No wonder GM cant sell the wheels.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
-
VIP Member
Originally Posted by
cstmg8
Really, I think the sidewall on my 19's is pushing it? I can't imagine another 2" of wheel.
I'm sure someone has 21's on here.
My point is you can have the same size tire on the 21's.
-
Originally Posted by
omatter74
What specs are your 2016 camaro-rims i just picked a set up but test fitring with the 8.5x20 25mm offset and 9.5x20 39mm offset phts them flush wth the edge of the fender.what tires size do you have. Thanks
20160530_163434.jpg
245/35/20 front
275/35/20 rear
I am going to get the rear quarters rolled. It just barely rubs with a full trunk or people in the back.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
I think i will sell them im comfident nobody around here can do a good job rolling my fenders
Sent from my SM-G900W8 using Tapatalk
MongosG8 liked this post
Reply With Quote