Site Sponsors & Vendors
Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: 3.7 ratio diffs

  1. #1
    Senior Member
    Join Date
    Dec 2008
    Posts
    336
    Post Thanks / Like

    Default 3.7 ratio diffs

    Who would be interested in some 3.7 ratio diff assemblies?
    These would be the complete center sections ready to bolt in (case, diff, gears, ect..)
    I still need to get a good shipping cost, price would be right at about $1,000. before shipping.

    Thanks
    Chris
    Gforce Engineering
    LIFETIME WARRANTY!
    The Leaders in IRS Drivetrain Technology
    gforce1320@gmail.com
    www.Gforce1320.com 316-260-8433
    http://i25.photobucket.com/albums/c9...honenumber.jpg

  2. #2
    Beyond Help r33pwrd's Avatar
    Join Date
    Dec 2008
    Location
    WA
    Posts
    2,887
    Post Thanks / Like

    Default

    If 3.7 is thought to be a good ratio im in...
    2009 G8

  3. #3
    The Great Pumpkin! 99-LS1-SS's Avatar
    Join Date
    Sep 2008
    Location
    In the middle of NC
    Posts
    7,460
    Post Thanks / Like

    Default

    It's the ratio that the manual transmission GXP's have. The automatic GXP's have the 3.27. Whether it's a good ratio or not depends on what you are looking for.
    SOLD: 2009 Maverick Silver G8 GXP M6
    Current Vehicle: 1984 Chevy K10 (it's red and redneck)
    New Vehicle: 1972 2wd K5 Blazer. It's being built right now. Link to the build is HERE

    You cannot strengthen the weak by weakening the strong. You cannot help the wage earner by pulling down the wage payer. You cannot help the poor by destroying the rich. You cannot help men permanently by doing for them what they could and should do for themselves.
    - John Henry Boetcker

  4. #4
    LOST BUT NEVER FORGOTTEN GRRRR8's Avatar
    Join Date
    Aug 2008
    Location
    Sugar Land Texas
    Posts
    15,917
    Post Thanks / Like

    Default

    For a M6 it is. Very steep for an auto in a DD. Probably OK with a 28in tire in a highly modded N/A car. 3.27-3.45 would be a better choice.
    2008 Liquid Red Pontiac G8 Sport/Premium - Adams Polishes - American Racing Headers - ARP - BMR Fabrication - Circle D Specialties - COMP Cams - Crazy Paul - Dynojet - Earl's - Flowmaster - Fuel Air Spark Technology - G2 - GFORCE 1320 - Greg Weld - HP Tuners - JBA - Lingenfelter - Maverick Man Carbon - Metco Motorsports Solutions - Mickey Thompson - M&H - Mike Norris Motorsports - NGK - Pace Performance - Pedders USA - Powerbond - PSI - Russell - SBX Performance - SJM Manufacturing - SPOHN Performance - Tony Mamo - Vararam - Vector Motorsports - Wretched Motorsports - 470 RWHP 427 TQ - Engine Tune By Patrick G

  5. #5
    Senior Member
    Join Date
    Dec 2008
    Posts
    336
    Post Thanks / Like

    Default

    The 3.91 and 3.73 ratios are popular in the GTO world, both in the auto and manual cars.
    Gforce Engineering
    LIFETIME WARRANTY!
    The Leaders in IRS Drivetrain Technology
    gforce1320@gmail.com
    www.Gforce1320.com 316-260-8433
    http://i25.photobucket.com/albums/c9...honenumber.jpg

  6. #6
    Beyond Help r33pwrd's Avatar
    Join Date
    Dec 2008
    Location
    WA
    Posts
    2,887
    Post Thanks / Like

    Default

    so dumd question... do the GXP and GT share the same rear diff housing?
    2009 G8

  7. #7
    Senior Member
    Join Date
    Dec 2008
    Posts
    336
    Post Thanks / Like

    Default

    I dont see why the wouldnt. If they come out with a different diff housing then it would explain why GM is broke, LOL
    Gforce Engineering
    LIFETIME WARRANTY!
    The Leaders in IRS Drivetrain Technology
    gforce1320@gmail.com
    www.Gforce1320.com 316-260-8433
    http://i25.photobucket.com/albums/c9...honenumber.jpg

  8. #8
    LOST BUT NEVER FORGOTTEN GRRRR8's Avatar
    Join Date
    Aug 2008
    Location
    Sugar Land Texas
    Posts
    15,917
    Post Thanks / Like

    Default

    The G8s have a 4.02 1st gear ratio with a 6 speed auto. The housings are the same. GXP gets 3.27 with the A6 and 3.70 with the M6.
    2008 Liquid Red Pontiac G8 Sport/Premium - Adams Polishes - American Racing Headers - ARP - BMR Fabrication - Circle D Specialties - COMP Cams - Crazy Paul - Dynojet - Earl's - Flowmaster - Fuel Air Spark Technology - G2 - GFORCE 1320 - Greg Weld - HP Tuners - JBA - Lingenfelter - Maverick Man Carbon - Metco Motorsports Solutions - Mickey Thompson - M&H - Mike Norris Motorsports - NGK - Pace Performance - Pedders USA - Powerbond - PSI - Russell - SBX Performance - SJM Manufacturing - SPOHN Performance - Tony Mamo - Vararam - Vector Motorsports - Wretched Motorsports - 470 RWHP 427 TQ - Engine Tune By Patrick G

  9. #9
    Senior Member
    Join Date
    Dec 2008
    Posts
    336
    Post Thanks / Like

    Default

    I hope to have these on my web site within the next day or 2. I just need to get the shipping cost locked down.
    Gforce Engineering
    LIFETIME WARRANTY!
    The Leaders in IRS Drivetrain Technology
    gforce1320@gmail.com
    www.Gforce1320.com 316-260-8433
    http://i25.photobucket.com/albums/c9...honenumber.jpg

  10. #10
    Smells of Bacon... GeorgeInNePa's Avatar
    Join Date
    Aug 2008
    Location
    Clarks Summit, Pa.
    Posts
    9,788
    Post Thanks / Like

    Default

    They have to be 3.70s? You'll move 3.27s and 3.45 much quicker.
    2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)

    '08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
    http://img.photobucket.com/albums/v3...a/gr_devil.gif
    Plastic Cuttin' Bad Ass!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •