Site Sponsors & Vendors
Results 1 to 2 of 2

Thread: Need help!!!!!!!

  1. #1
    Junior Member
    Join Date
    Sep 2022
    Posts
    1
    Post Thanks / Like

    Default Need help!!!!!!!

    2008 g8 gt went for a drive car dies. Went to start and nothing. Nothing to starter at all. Iíve jumped pins to verify starter works and turns car over. Hooked scanner to it. No communication to ecm. Ordered a new ecm still the same result. Checked grounds checked fuses. Really has me baffled any help would be appreciated. By testing starter I know the charging system is up to par. It is procharged on e85 everything was fine all the sudden nothing. Starter doesnít engage typical messages on dash. I was able to clear codes but still nothing no communication

  2. #2
    Senior Member SpaceFrank's Avatar
    Join Date
    Apr 2014
    Location
    Houston, TX
    Posts
    117
    Post Thanks / Like

    Default

    I want to suggest checking the (hidden) fusible link in the large red 12v cable running up the driver's side of the engine compartment, but if you jumped it and the starter still turns over, that might not be your problem.
    Trogdor, the Burninator - 2008 G8 GT. 376/480 LS3 crate, Vararam intake, Kooks headers, Unidentified full exhaust, and a particularly realistic "flame job."

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •