Site Sponsors & Vendors
Results 1 to 3 of 3

Thread: MotorKote Test Video (pretty interesting actually)

  1. #1
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Exclamation MotorKote Test Video (pretty interesting actually)

    I subscribe to this guys channel because I find it interesting. He's NOT sponsored so the tests he does are purely for his enjoyment and ours and there's no sponsorship bias.

    I watched this one and was actually impressed by what I saw. If you have a moment, watch it and tell me what you think.

    Can MotorKote survive the water test? Let's find out!

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  2. #2
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    4,993
    Post Thanks / Like

    Default

    Quote Originally Posted by Chewy View Post
    I subscribe to this guys channel because I find it interesting. He's NOT sponsored so the tests he does are purely for his enjoyment and ours and there's no sponsorship bias.

    I watched this one and was actually impressed by what I saw. If you have a moment, watch it and tell me what you think.

    Can MotorKote survive the water test? Let's find out!
    I enjoy the guys videos. I'm not sure how "precise" his testing is, but I generally trust his results.

    I'll have to subscribe! Previously I just happened across his vids. (the threadlocker one most recently)
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  3. #3
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Default

    Ya, definitely not scientific, but neat to watch and in the case of this one, somewhat amazing. Years ago I used a product called "Engine Restore" and thought it worked, but he actually put it to the test and proved that in HIS case, it worked.

    This MotorKote definitely makes you think about it. I may put some in my mower for S&G's.

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •