Site Sponsors & Vendors
Results 1 to 7 of 7

Thread: Need help with LSA swap ALMOST THERE!!!

  1. #1
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    Post Thanks / Like

    Default Need help with LSA swap ALMOST THERE!!!

    Finishing up the LSA install and could really use some help. What intake are you guys using? What belt should I get from napa with cts-v balancer and 2.55 upper? How did you get the fuel from the passenger side to the drivers side?

  2. #2
    Senior Member
    Join Date
    Sep 2014
    Location
    S. Florida
    Posts
    298
    Post Thanks / Like

    Default

    Belt for 2.55 and stock lower/idlers should be 65.2" long, K080653 / 8PK1655.
    The Intake will have to be custom made or you can buy a intake for ZL1(or Camaro SS) and adapt it to fit(nothing major). If going custom with LS7 MAF need to make a MAF tube, geta 90 silicone coupler, some 4" piping, cone filter and clamps. Depending on where you want the filter to sit(behind the fog light area is better so it draws cold air) you will need to get enough tubing etc. Will need another 90 bend or 2 45deg to get it down by the fog light...
    As for the fuel line need about 1.5feet 6an fuel hose(if going E85 make sure it's compatible usually PTFE lined) pre-built with 6an female fittings on the ends. Then two Russel 6an male to 3/8 SAE quick efi adapter fittings.

    Sent from my Pixel 2 XL using Tapatalk

  3. #3
    Moderator, Retired -Ray-'s Avatar
    Join Date
    Aug 2008
    Location
    San Antonio, TX
    Posts
    20,421
    Post Thanks / Like

    Default

    I believe there was more than 1 solution for a fuel rail. My connection for fuel was on the drivers side.
    Rest in Peace Charlie!

    Sold


    Just a GT


    Quote Originally Posted by RichsGreyGT View Post
    this site is hardcore modding central.

  4. #4
    Member
    Join Date
    Nov 2013
    Location
    Nj
    Posts
    48
    Post Thanks / Like

    Default

    When I did mine I talked to Adam Cooper at ACE performance and he had everything I needed to install it

  5. #5
    Junior Member
    Join Date
    Jan 2018
    Posts
    6
    Post Thanks / Like

    Default

    I bought the ZR1 fuel rail from Glanzer and the hookup is on driver side.

  6. #6
    Member jstclair's Avatar
    Join Date
    Jan 2016
    Location
    Colorado
    Posts
    45
    Post Thanks / Like

    Default

    Quote Originally Posted by Jackball60 View Post
    I bought the ZR1 fuel rail from Glanzer and the hookup is on driver side.
    this... +1

  7. #7
    Junior Member
    Join Date
    Jan 2019
    Location
    Denmark
    Posts
    9
    Post Thanks / Like

    Default Need help with LSA swap ALMOST THERE

    So I just bought this turbo kit for a REALLY good price, problem is it is made for a 5.0 mustang. I need to know if there is any this can work for my car and I need a complete list of everything I will need to do so. If it wont work I can just re-sell it for a good profit, so please help me out guys

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •