Site Sponsors & Vendors
Results 1 to 4 of 4

Thread: Samco GXP silicone radiator hoses now avaliable

  1. #1
    Senior Member
    Join Date
    Jun 2011
    Location
    Lodi, CA
    Posts
    115
    Post Thanks / Like

    Default Samco GXP silicone radiator hoses now avaliable

    I posted this on the engine section but for us GXP owners no one makes the shorter GXP upper radiator hose anymore. If you order it will default to the longer GT hose. I worked with a friend and sent GXP hoses to Samco they just sent back proto types for me to test and are now available. So now there is a source for silicone GXP radiator hoses. For now Jeff will be the sole distributor of these hoses and his website is siliconehosekits.net



    Thanks Tom
    G8 GXP A6

  2. #2
    Addicted Member bracketracer's Avatar
    Join Date
    Jul 2009
    Location
    Dane, WI
    Posts
    628
    Post Thanks / Like

    Default

    Can you post pics of how they look installed?
    Joe Morgan
    '93 Sunbird SE 3.1/5-speed 14.869 @ 90.96
    2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, PB with new cam & tune 12.191 @ 112.35, 2:59 Second Lap Time Road America (Goodyear RS-As & Hawk HP Plus pads with stock rotors), 141 mph for NoFlyZoneMidwest Spring 2016 on wet runway

    VCM OTR CAI, HSRK, Heater Hose Relocate, Custom tuned by Oldskoolgp, Comp Cams 224/228 .581"/.588" 112 LSA cam, LS7 lifters, PAC 1219x springs, Kooks coated LTH, Monster LT1S (C7 Corvette) Clutch & flywheel kit, Hvy Dty Master & Slave Cylinders, Solo Performance Hi-Flo Cats, Solo Mach Balanced Catback, BMR Tunnel Brace, Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings
    1 of only 10 GXPs built in this combo & #1497 of the 1829

  3. #3
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,303
    Post Thanks / Like

    Default

    I have a set but have yet to install them!

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  4. #4
    Addicted Member bracketracer's Avatar
    Join Date
    Jul 2009
    Location
    Dane, WI
    Posts
    628
    Post Thanks / Like

    Default

    Do they look like they are good quality, and do they look like they will fit alright?
    Joe Morgan
    '93 Sunbird SE 3.1/5-speed 14.869 @ 90.96
    2009.5 G8 GXP WH 6M onyx/red no roof 12.921 @ 108.89 BONE STOCK! (then), (now) 12.344 @ 110.92 with 1.688 60' at 766' DA, PB with new cam & tune 12.191 @ 112.35, 2:59 Second Lap Time Road America (Goodyear RS-As & Hawk HP Plus pads with stock rotors), 141 mph for NoFlyZoneMidwest Spring 2016 on wet runway

    VCM OTR CAI, HSRK, Heater Hose Relocate, Custom tuned by Oldskoolgp, Comp Cams 224/228 .581"/.588" 112 LSA cam, LS7 lifters, PAC 1219x springs, Kooks coated LTH, Monster LT1S (C7 Corvette) Clutch & flywheel kit, Hvy Dty Master & Slave Cylinders, Solo Performance Hi-Flo Cats, Solo Mach Balanced Catback, BMR Tunnel Brace, Toe Rods, Trailing Arms, Cradle & Diff Poly Bushings
    1 of only 10 GXPs built in this combo & #1497 of the 1829

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •