Site Sponsors & Vendors
Results 1 to 6 of 6

Thread: Emblem Replacement

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Posts
    15
    Post Thanks / Like

    Default Emblem Replacement

    I am thinking about getting the Front/Rear arrowhead kit for gtog8ta.com and was wondering if anybody else has put their emblems on and how well their emblems hold up.

  2. #2
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Default

    I have the black ones and they're nice! Are they as good as OEM? No clue! My car sits indoors 9.9999 days out of 10.

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  3. #3
    Junior Member
    Join Date
    Feb 2016
    Posts
    26
    Post Thanks / Like

    Default

    Mine have held up for quite some time now and yes they are nice, I opted for the black on red and loved them

  4. #4
    Junior Member
    Join Date
    Feb 2015
    Posts
    1
    Post Thanks / Like

    Default

    What’s the easiest way to remove front and rear badges need to replace them due to damage. Any help be appreciated brothas

  5. #5
    Addicted Member JimmyJazz's Avatar
    Join Date
    Sep 2008
    Location
    TX
    Posts
    728
    Post Thanks / Like

    Default

    Heat gun and fishing line. What year is your car. 08-09 have three location pins in the front emblem. 09 1/2 don't have the three pins, the trunk lid doesn't have any pins. Use some masking tape to outline the dart before you take it off so it will be centered when you put the new one on.
    Last edited by JimmyJazz; 04-06-2018 at 08:34 AM.
    '09 Pacific Slate G8 GT,1900 Magnacharger cog drive. Engine rebuilt by Texas Speed and Performance with some very nice parts. Airaid intake, Kooks 1 7/8" lt's, cats, midpipe, SLP PowerFlow exhaust. Pedders lowered touring package. Baer Pro front brakes. ForgeStar F14 GunMetal 19x8.5 Michelin Pilot Sport a/s. '78 El Camino. 2008 model Blue Heeler.

  6. #6
    VIP Member donkeyGT's Avatar
    Join Date
    Dec 2010
    Location
    Jenison, MI
    Posts
    1,254
    Post Thanks / Like

    Default

    Quote Originally Posted by JimmyJazz View Post
    Heat gun and fishing line. What year is your car. 08-09 have three location pins in the front emblem. 09 1/2 don't have the three pins, the trunk lid doesn't have any pins. Use some masking tape to outline the dart before you tale it off so it will be centered when you put the new one on.
    And there you have it.
    2009 GT PBM Sport/Premium Packs
    Kook's / Corsa / Roto Fab CAI with HSRK / Polished Camaro's with Nitto Invo's / Camaro Brembo's / GRRRR8 Hose & ARP Bolt kits / VG Fin / GXP diffuser / Black door trim & other goodies from CP / UPR catch can / Livernois / BMR / Russell / Jet-Hot / SunTech tint by Drew / MM / Adams / Klearz / TSS

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •