Long story short, I've owned this car around 8 months and maybe 10k miles. Had two LS7 lifters fail, took out the cam and bearings. Got a Pat G cam, sent my heads off etc etc etc. I will post pics as it continues on. Here is from tonight.
Long story short, I've owned this car around 8 months and maybe 10k miles. Had two LS7 lifters fail, took out the cam and bearings. Got a Pat G cam, sent my heads off etc etc etc. I will post pics as it continues on. Here is from tonight.
2009 GT-Rotofab~VMS tune~jba headers~solo catback~camaro wheels~slotted and drilled rotors
SOON TO BE: Pat G cam, headwork, Manzo headers, removal of crap VMS tune.
2004 Sierra Crew Cab-Cal Speed stainless LT~hooker aerochamber~Black Bear Performance tune~Ridetech coilovers-dropped 5.5"/8"...much more, FOR SALE
Here are some problems with the car that I bought.
Parts
manzo
p&p milled .024
trunion upgrade
DOD delete and BTR springs with ti retainer
wobby HB
Last edited by GingerBeard Man; 03-27-2015 at 10:17 PM.
2009 GT-Rotofab~VMS tune~jba headers~solo catback~camaro wheels~slotted and drilled rotors
SOON TO BE: Pat G cam, headwork, Manzo headers, removal of crap VMS tune.
2004 Sierra Crew Cab-Cal Speed stainless LT~hooker aerochamber~Black Bear Performance tune~Ridetech coilovers-dropped 5.5"/8"...much more, FOR SALE
Still curious as to why it was the ls7 and not dod.
2009 GT-Rotofab~VMS tune~jba headers~solo catback~camaro wheels~slotted and drilled rotors
SOON TO BE: Pat G cam, headwork, Manzo headers, removal of crap VMS tune.
2004 Sierra Crew Cab-Cal Speed stainless LT~hooker aerochamber~Black Bear Performance tune~Ridetech coilovers-dropped 5.5"/8"...much more, FOR SALE
Because LS7 lifters suck
Well, that must have been my issue.
2009 GT-Rotofab~VMS tune~jba headers~solo catback~camaro wheels~slotted and drilled rotors
SOON TO BE: Pat G cam, headwork, Manzo headers, removal of crap VMS tune.
2004 Sierra Crew Cab-Cal Speed stainless LT~hooker aerochamber~Black Bear Performance tune~Ridetech coilovers-dropped 5.5"/8"...much more, FOR SALE
Looks like the theives returned your engine and gave you some new parts to put it back together so they can steal it again.
That is what my lifter looked like when it went bad, at least I got a Brand New engine from GM
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here
Hopefully these stay in tact.
2009 GT-Rotofab~VMS tune~jba headers~solo catback~camaro wheels~slotted and drilled rotors
SOON TO BE: Pat G cam, headwork, Manzo headers, removal of crap VMS tune.
2004 Sierra Crew Cab-Cal Speed stainless LT~hooker aerochamber~Black Bear Performance tune~Ridetech coilovers-dropped 5.5"/8"...much more, FOR SALE
Its a sick feeling and sound for sure
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed Curt here
I didn't see or read what lifters you're planning on running now. ???
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!