Site Sponsors & Vendors
Results 1 to 6 of 6

Thread: Issue @ Idle...

  1. #1
    Vendors peterg22000's Avatar
    Join Date
    Sep 2008
    Location
    Toronto, ON. Canada
    Posts
    779
    Post Thanks / Like

    Default Issue @ Idle...

    So for a while now I've been having issues when my car is idling in gear (red lights and such)
    Whats happening is that I can feel the car getting a little shaky, Very little, but noticeable. along with the rough idle, the car starts running lean, but goes back to normal if I throw it into neutral or start to drive.

    Now there are time (few and far between) that the car REFUSES to settle its AFR for a while after setting off again.

    Has anyone had this or similar issues with their GT?

    http://forum.grrrr8.net/signaturepics/sigpic219_1.gif
    2009 Phantom Metallic G8 GTS
    Appearance;HSV Fenders | HSV GTS Spoiler | GXP Bumper | GXP Diffuser | HSV Triple Gauges with Dash/Console conversion(First in North America) | HSV GTS Sport Steering Wheel | 20% tint | 6.0 Litre V8 Badges | Blacked out Window & Grill Chrome| V6 door handles | Tinted Tails/Front Side Markers
    Performance; Tuned | Roto Fab CAI | SLP Long tube Headers & PowerFlow axlebacks | Xpipe | DOD Delete | GTO LS2 Cam | Forged Rods & Pistons
    Handling; XA Coilovers | BMR Swaybars | "EXTREMEContact" tires
    Coming soon; Boost!

    12.9199 @ 106mph <old setup, before DOD delete/GTO cam/Forging

  2. #2
    VIP Member
    Join Date
    Oct 2008
    Location
    Apex, NC
    Posts
    1,330
    Post Thanks / Like

    Default

    Had trouble with mine this week idling rough; fuel trims were -7...-10 and +10 at WOT. My installer (Rick Crawford) thinks it's the MAF card as everything else seemed OK. Might be the same for you but I'm just going from my experience. New one on order for me and should be in early next week if not tomorrow.
    2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3” exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 223/238 .615/.601, 116 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.

  3. #3
    Beyond Help
    Join Date
    Apr 2010
    Location
    Ocala, FL
    Posts
    2,759
    Post Thanks / Like

    Default

    Could be a vacuum leak as well.
    2008 G8 GT
    TSP Forged LS3- D1-221/232 RCR Cam-Ported L92's-Yank2800 Triple Disc-Squash-ID850-Coolingmist Meth Injection-Demon8 Designs-Aerofoce-BMR-BC Racing-Brembos-Kooks-Solo 3in-Derale atomic super cooler-ace performance built 6l80
    Rick Crawford Tuned
    663/596 Rwhp rwtq for now....
    10.87 at 133 1.59 60ft

  4. #4
    Beyond Help DavesG8GT's Avatar
    Join Date
    Jan 2010
    Location
    Birmingham AL
    Posts
    1,038
    Post Thanks / Like

    Default

    Or something with the evap purge. Check for vac leaks around the connections of the evap purge to start with I'd say.
    New (cheap monthly payment car, lol): '12 Candy Apple Red Mustang GT 5.0 6MT, stock for the time being

    **SOLD **
    White Hot '09 G8 GT, Pat G tune, Pat G cam (.634"/.608", 223/230, 112 + 2), G8-4-Speed ported & milled heads, "ram air" intake, & ported TB; Reckart 90mm MAF/LS7 card, HSRK, DT headers, Rotofab, Magnaflow CB, H & R springs, stock gears & stock stall, 11.865 @ 120.32 mph, 1.941 sec 60'

  5. #5
    Vendors peterg22000's Avatar
    Join Date
    Sep 2008
    Location
    Toronto, ON. Canada
    Posts
    779
    Post Thanks / Like

    Default

    well I cleaned the MAF and the TB, checked for vac leaks and re-fixed a wire that was going to the MAF sensor (fixed in the past with tape only) still the issue persists.

    Anyone have another idea?.
    http://forum.grrrr8.net/signaturepics/sigpic219_1.gif
    2009 Phantom Metallic G8 GTS
    Appearance;HSV Fenders | HSV GTS Spoiler | GXP Bumper | GXP Diffuser | HSV Triple Gauges with Dash/Console conversion(First in North America) | HSV GTS Sport Steering Wheel | 20% tint | 6.0 Litre V8 Badges | Blacked out Window & Grill Chrome| V6 door handles | Tinted Tails/Front Side Markers
    Performance; Tuned | Roto Fab CAI | SLP Long tube Headers & PowerFlow axlebacks | Xpipe | DOD Delete | GTO LS2 Cam | Forged Rods & Pistons
    Handling; XA Coilovers | BMR Swaybars | "EXTREMEContact" tires
    Coming soon; Boost!

    12.9199 @ 106mph <old setup, before DOD delete/GTO cam/Forging

  6. #6
    Vendors peterg22000's Avatar
    Join Date
    Sep 2008
    Location
    Toronto, ON. Canada
    Posts
    779
    Post Thanks / Like

    Default

    Is it possible that the issue can be something to do with my tune? I never made any changes previous to the issue starting, but I had one guy tell me that sometimes as random PCMs can sometimes go a little wonky and the tune can glitch. it that possible, and if so would a quick re flash solve it?
    http://forum.grrrr8.net/signaturepics/sigpic219_1.gif
    2009 Phantom Metallic G8 GTS
    Appearance;HSV Fenders | HSV GTS Spoiler | GXP Bumper | GXP Diffuser | HSV Triple Gauges with Dash/Console conversion(First in North America) | HSV GTS Sport Steering Wheel | 20% tint | 6.0 Litre V8 Badges | Blacked out Window & Grill Chrome| V6 door handles | Tinted Tails/Front Side Markers
    Performance; Tuned | Roto Fab CAI | SLP Long tube Headers & PowerFlow axlebacks | Xpipe | DOD Delete | GTO LS2 Cam | Forged Rods & Pistons
    Handling; XA Coilovers | BMR Swaybars | "EXTREMEContact" tires
    Coming soon; Boost!

    12.9199 @ 106mph <old setup, before DOD delete/GTO cam/Forging

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •