-
03-23-2017, 04:18 AM
#231
Originally Posted by
toomanyhobbies
ok, i think the megatape did the trick. So far so good anyway. I will check for drips in the morning but so far nothing. The picture is the temperature of my water tank after running a few minutes. After i shut off the engine the supercharger case was cool to the touch the rest of the engine obviously was not :d
if the leaks are still gone in the morning i will put the nose back on it in the morning and head for valdosta on friday.
a w e s o m e !
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
-
03-23-2017, 05:43 AM
#232
Originally Posted by
TrekGTO
Daymn Son you did good! I guarantee you will have the coldest bumper there! People will be sitting on your bumper just to cool there ass. You have HPT to data log at the track?
You know what all that cold heavy aluminum is like a heat sink the aluminum will help to carry the heat load also.
I do have HPT and will log it at the track.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
-
03-24-2017, 11:43 AM
#233
Vendors
-
03-27-2017, 02:00 PM
#234
Beyond Help
Texas speed 408 stroker,Lingenfelter ls3 ported heads,tv1900,2.8 pulley,kooks header header back,custom axel back, squash double pump upgrade, e85 tein lowering , demon 8 triple pod, brembo brakes ,brm sway bar, bmr toe rod , bmr end link, spohn trailing arms, tein springs,tsw nurburgring rims. Icebox. Old numbers on stock engine 650/620 with 3.0 pulley
-
03-27-2017, 02:07 PM
#235
No way those intakes are "better than" PVC tubing and duct tape!
Those two engine compartments must have "at least" $200 invested in those set ups.
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
-
03-29-2017, 05:19 PM
#236
Vendors
Originally Posted by
STL_G8GT
Millrose 70885 on Amazon... Incredible stuff if you need ptfe tape for anything.
Sent from my LG-D851 using Tapatalk
Thanks for the idea, I didn't have to bother my plumber friend.
I got mine on Ebay, I did not know Amazon does not take PayPal. Thanks I never had 4 new rolls at one time $15 and my open roll. Aren't you blue with envy!
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
03-29-2017, 09:17 PM
#237
VIP Member
Originally Posted by
TrekGTO
Thanks for the idea, I didn't have to bother my plumber friend.
I got mine on Ebay, I did not know Amazon does not take PayPal. Thanks I never had 4 new rolls at one time $15 and my open roll. Aren't you blue with envy!
It's almost funny to get excited over something so simple, but that stuff is awesome!!
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Charlie - GRRRR8
RIP Chris Wells - Panzer Leader
-
03-30-2017, 06:33 AM
#238
Senior Member
-
03-30-2017, 07:33 AM
#239
Originally Posted by
Unavowed
Wow! That is fascinating!
Hurry up with my system TrekGTO!!!!! :-)
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
-
03-30-2017, 07:52 AM
#240
Vendors
Originally Posted by
Unavowed
That sounds familiar, ah it will never work, they don't know what the F they are doing! Freon to liquid H/E, never work!