Site Sponsors & Vendors
Results 1 to 8 of 8

Thread: Fuel Injector Orings

  1. #1
    Formerly HSV-GTS-300 Crazy Paul's Avatar
    Join Date
    Aug 2008
    Location
    Perth, Australia
    Posts
    8,475
    Post Thanks / Like

    Default Fuel Injector Orings

    Orings to fit fuel injectors on L76,L98(Aust),LS3,LS7.
    These are difficult items to find but I've tracked them down in OEM quality.



    Crazy Paul
    Your Holden Parts Connection in Australia!

  2. #2
    Formerly HSV-GTS-300 Crazy Paul's Avatar
    Join Date
    Aug 2008
    Location
    Perth, Australia
    Posts
    8,475
    Post Thanks / Like

    Default

    Packet of 16 new O Rings shipped by Airmail ETA 10 days.
    Total shipped US$15
    Pay by Paypal.


    (Discounts available for multiple quantities shipped to the same address, just ask)

    L76 Fuel Injector O Rings.
    L98 Fuel Injector O Rings (6.0 Aust & Middle East).
    LS3 Fuel Injector O Rings.
    LS7 Fuel Injector O Rings.
    Last edited by Crazy Paul; 01-31-2011 at 04:35 PM.
    Crazy Paul
    Your Holden Parts Connection in Australia!

  3. #3
    Beyond Help gr8lover's Avatar
    Join Date
    Jun 2009
    Location
    SE Michigan
    Posts
    2,303
    Post Thanks / Like

    Default

    Paul,

    Are these orings all the same?.... for the L76, L98, Ls3, Ls7?.... I think the top are all the same...correct?..... do you happen to know the ID of the orings and then also the diameter of the cross section of the ring?..

    I have Ls7 heads so I hear I need special lower orings to fit the std siemens injector for the injector to intake... but takes std upper oring.... trying to get upper orings asap somewhere nearby.,,,

    thanks

    Chuck
    2009 G8 GT; F1x procharger on Supercharger store direct drive system; 430cuin LSX; E85; 9" rear; DSS once pc driveshaft; 4L80
    9.2@151.... fastest and heaviest G8 known to man.... ...

  4. #4
    Formerly HSV-GTS-300 Crazy Paul's Avatar
    Join Date
    Aug 2008
    Location
    Perth, Australia
    Posts
    8,475
    Post Thanks / Like

    Default

    Quote Originally Posted by gr8lover View Post
    Paul,
    Are these orings all the same?.... for the L76, L98, Ls3, Ls7?.... I think the top are all the same...correct?..... do you happen to know the ID of the orings and then also the diameter of the cross section of the ring?..
    Uppers are all the same and easy to find.
    Pay attention to getting the correct compound (V75).
    Brown ones for injector to fuel rail joint in pics above:
    BS 203 Viton 75.
    ID 7.52mm x 3.53mm Cross Section.
    Crazy Paul
    Your Holden Parts Connection in Australia!

  5. #5
    Junior Member
    Join Date
    Oct 2016
    Location
    Chattanooga TN
    Posts
    1
    Post Thanks / Like

    Default

    Hello Paul,

    How can I order these from you for my 2008 L76? I started with a leak around the coupling at the throttle body for the PCV line. Replaced it with a catch can set up, now the leak sounds like it may be coming from one of the bank 1 injectors.

  6. #6
    Senior Member Unavowed's Avatar
    Join Date
    Dec 2012
    Posts
    372
    Post Thanks / Like

    Default

    Quote Originally Posted by q_mecca View Post
    Hello Paul,

    How can I order these from you for my 2008 L76? I started with a leak around the coupling at the throttle body for the PCV line. Replaced it with a catch can set up, now the leak sounds like it may be coming from one of the bank 1 injectors.
    Paul has retired. Check with Greg at Pace.

  7. #7
    Vendors Phil@PnP Tech's Avatar
    Join Date
    Nov 2011
    Location
    Cincinnati,OH
    Posts
    544
    Post Thanks / Like

    Default

    Quote Originally Posted by q_mecca View Post
    Hello Paul,

    How can I order these from you for my 2008 L76? I started with a leak around the coupling at the throttle body for the PCV line. Replaced it with a catch can set up, now the leak sounds like it may be coming from one of the bank 1 injectors.
    ACDelco 217-1624

    Around $25 on Amazon or Rockauto.
    Phillip M.
    09.5 SBM GT Sports/Premium/Roof

    Engine: Stock Bottom End
    Heads: Stock, LS3 Intake, LY6 Exhaust, Milled
    Cam: BTR IV PD
    Intake: Stock Intake, Stock TB, LS7 MAF, Volant CAI
    Exhaust: 1-7/8 Kooks LT's, Off-Road Pipes, Corsa cat-back
    Fuel: Fore Twin Ti 450's, Vaporworx, E85, Bosch Injectors
    Drivetrain: 6L80, Sonnax
    Suspension: BMR 15" Strange Coilovers
    Wheels/Tires: 15x10 RT-S on 275/60R15 Pro's, 17x5 Weld on M/T 28"
    Ported LSA Blower, 9.55/2.55, 102 TB, Chiller

    High Compression/Boost/E85

  8. #8
    Moderator, Retired -Ray-'s Avatar
    Join Date
    Aug 2008
    Location
    San Antonio, TX
    Posts
    20,435
    Post Thanks / Like

    Default

    I have several sets of these orings. Let me know if you need a set.
    Rest in Peace Charlie!

    Sold


    Just a GT


    Quote Originally Posted by RichsGreyGT View Post
    this site is hardcore modding central.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •