Ever any resolution here?
Ever any resolution here?
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
As far as I know since I had the Kooks LT headers installed it has gone away. Not sure why or how but it may of been the o2 sensor or bung ?
She runs great, I guess once we or if we ever get any rain here in Texas I'll be able to tell. I did run thru ran after the headers were installed and everything was aok.
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installedCurt here
I have not had the issue since LTs either.Originally Posted by texn884
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
Maybe the LT's were the fix?
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed
After reading the issue, my noise seems to be the same. Don't get enough rain to test it, though. I have lt's and the stock axleback...
I will check for drain holes on the mufflers (stock should have them, right)....
Did both of you have your IAT sensor relocated?
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Yep stick a smaller nail thru the drain hole just to make sure its not clogged with anything.
Whats the IAT sensor?
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed
Intake air temp, most relocate to avoid heat issues under the hood and in air intake tube...
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Yes i have mine relocated and man you can sure tell the difference, got mine from Marty. Well worth the $80.00 or so. Easy to put on the Roto-Fab tube.
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed
^^Where i can get this?? Ive been driving in heavy rain today at from 0-60 kmph and i had this weird sound for half an hour.. Its a terrible sound. Got it also few months ago while again driving in heavy rain on the highway but last only about 30 sec.. Will it will do in in heavy snow???? I need that fix..
Thanks
Doesn't do it in snow, just rain and standing water. I've experienced an Alberta winter and a half with mine and can confirm.
Sent from Hell via my Galaxy S Captivate
2009 Maverick Silver Metallic G8 GT - sold...
Go: Roto-Fab CAI & AFE ProDry S, CORSA catback, HP Tuners
Show: BE Breyton GTS-AV's 19" Hyper Silver staggered with Bridgestone Potenza RE-760's 245/40 & 275/35, tint, partial debadge, VG Sharkfin antenna, Holden V8 6.0L fender badges
2012 Platinum Grey Metallic Volkswagen Jetta Highline TDi M6...
Posting Permissions
Reply With Quote
