Site Sponsors & Vendors
Results 1 to 8 of 8

Thread: BMR Lowering Springs

  1. #1
    Senior Member G8Headache's Avatar
    Join Date
    Jul 2010
    Location
    Colorado, but hail from Chicago
    Posts
    167
    Post Thanks / Like

    Default BMR Lowering Springs

    Has anyone bought these yet? Are they Worth it or Not. And also the kit is 1.25 drop in front and 1.00 drop in rear, If Im running 19x8.5, 245/40/19 in front and 19x9.5, 275/35/19 in the rear and I do this drop, Do you think Ill get rubbing anywhere in the wheel wells? Also Im deff gunna have to get an alignment once Im done right?

  2. #2
    Addicted Member BMR Sales's Avatar
    Join Date
    Oct 2008
    Location
    Thonotosassa, FL
    Posts
    862
    Post Thanks / Like

    Default

    They are not available yet, we have been having some issues with our spring manufacturer. I think we have worked most of the issues out and will be getting back to R&Ding them so we can get them released.
    T.C. Davis
    BMR G8/5th Gen Camaro Classic GM Tech/Sales

    tc@bmrsuspension.com
    www.bmrsuspension.com
    813.986.9302
    Like us on Facebook!

  3. #3
    Senior Member G8Headache's Avatar
    Join Date
    Jul 2010
    Location
    Colorado, but hail from Chicago
    Posts
    167
    Post Thanks / Like

    Default

    Theres a website I found thats selling them. They have it advertised as " NOW Available" I dunno though. I was just curious.

  4. #4
    Addicted Member BMR Sales's Avatar
    Join Date
    Oct 2008
    Location
    Thonotosassa, FL
    Posts
    862
    Post Thanks / Like

    Default

    Quote Originally Posted by G8Headache View Post
    Theres a website I found thats selling them. They have it advertised as " NOW Available" I dunno though. I was just curious.
    I can tell you 100% that is incorrect, we should have them before too long but they are definitely not available yet.
    T.C. Davis
    BMR G8/5th Gen Camaro Classic GM Tech/Sales

    tc@bmrsuspension.com
    www.bmrsuspension.com
    813.986.9302
    Like us on Facebook!

  5. #5
    Senior Member dklau33's Avatar
    Join Date
    Sep 2008
    Location
    San Francisco Bay Area, CA
    Posts
    370
    Post Thanks / Like

    Default

    Kyle, does BMR have any plans on making OE or near OE height springs with a moderate spring rate increase of like 15-30%? I would love to get a set like that at a reasonable price to go along with all my other BMR parts on the car.

  6. #6
    Addicted Member BMR Sales's Avatar
    Join Date
    Oct 2008
    Location
    Thonotosassa, FL
    Posts
    862
    Post Thanks / Like

    Default

    Quote Originally Posted by dklau33 View Post
    Kyle, does BMR have any plans on making OE or near OE height springs with a moderate spring rate increase of like 15-30%? I would love to get a set like that at a reasonable price to go along with all my other BMR parts on the car.
    Honestly I think they will be 1"-1.25" lowering springs and with them being lowering springs they will be a bit stiffer. I will get some preliminary details on the springs and see what we are thinking they will end up stiffness wise.
    T.C. Davis
    BMR G8/5th Gen Camaro Classic GM Tech/Sales

    tc@bmrsuspension.com
    www.bmrsuspension.com
    813.986.9302
    Like us on Facebook!

  7. #7
    Administrator Chewy's Avatar
    Join Date
    Aug 2008
    Location
    Bettendorf, IA
    Posts
    7,298
    Post Thanks / Like

    Default

    Quote Originally Posted by BMR Sales View Post
    Honestly I think they will be 1"-1.25" lowering springs and with them being lowering springs they will be a bit stiffer. I will get some preliminary details on the springs and see what we are thinking they will end up stiffness wise.
    Hey Kyle, I think what he's getting at is he doesn't want to lower it. Pedders offers both. Just a thought...

    Work on the engineers about those front control and radius arms please!!!! I KNOW it'd be a HUGE plus to have HD ball joints!!!

    Chris

    2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!

  8. #8
    Addicted Member BMR Sales's Avatar
    Join Date
    Oct 2008
    Location
    Thonotosassa, FL
    Posts
    862
    Post Thanks / Like

    Default

    Quote Originally Posted by 4GASEM View Post
    Hey Kyle, I think what he's getting at is he doesn't want to lower it. Pedders offers both. Just a thought...

    Work on the engineers about those front control and radius arms please!!!! I KNOW it'd be a HUGE plus to have HD ball joints!!!

    Chris
    Yeah I know, but I am pretty sure we won't sell enough stock height springs to make it worth while to build them. I am gonna go out in the shop and talk to the guys about the front LCA's and radius arms. I know they have a bunch of drawings and ideas but I am not sure where they are at with them.
    T.C. Davis
    BMR G8/5th Gen Camaro Classic GM Tech/Sales

    tc@bmrsuspension.com
    www.bmrsuspension.com
    813.986.9302
    Like us on Facebook!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •