Site Sponsors & Vendors
Results 1 to 2 of 2

Thread: question about pinning crank

  1. 05-02-2016, 06:18 PM #1
    Darkmanx
    Darkmanx is offline
    Beyond Help Darkmanx's Avatar
    Join Date
    May 2010
    Location
    ft lauderdale fl
    Posts
    2,148
    Post Thanks / Like

    Default question about pinning crank

    Im thinking about switching out my 1900 for a lsa setup , If i swap the units i am going to need a new balancer am i going to need to repin the crank again once its time to switch balancers?

    Texas speed 408 stroker,Lingenfelter ls3 ported heads,tv1900,2.8 pulley,kooks header header back,custom axel back, squash double pump upgrade, e85 tein lowering , demon 8 triple pod, brembo brakes ,brm sway bar, bmr toe rod , bmr end link, spohn trailing arms, tein springs,tsw nurburgring rims. Icebox. Old numbers on stock engine 650/620 with 3.0 pulley
    Reply With Quote Reply With Quote
  2. 05-03-2016, 04:04 AM #2
    jcmGT
    jcmGT is offline
    Addicted Member
    Join Date
    Sep 2009
    Location
    VT
    Posts
    940
    Post Thanks / Like

    Default

    Yes, LSA requires a pinned dampener. If you go ATI, it's a different orientation.
    9.5 RPM (Red Passion Metallic)
    Sport /Premium
    "If the women don't find you handsome, they should at least find you handy"-Red Green


    Reply With Quote Reply With Quote
« GXP with Maggie 2300 what psi on stock cam | Magnuson 1900 Project- over-drive Cog, Porting, & Cutting out restrictions.... »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules