Houston folks
I hope everyone is ok.
My daughter is in Harris county and her first floor apt is under water. She just got married last Oct. and lost everything they had, including their cars, one was brand new.
I haven't heard from my step son yet, also in Houston, but he has a habit of forgetting to charge his phone.
Rest in Peace Charlie!
Sold
Just a GT
Originally Posted by RichsGreyGT
This was a "heavy duty" storm!! This one was not normal. I could not see any part of the road at the street corner
Sent from my iPhone using Tapatalk
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
Sorry they lost stuff - but "they" are okay?
Sent from my iPhone using Tapatalk
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
Oh Oh! Keep us informed, Ray.
Sorry to hear. They have been getting some incredible rain.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
Yep, all the kids are ok.
Rest in Peace Charlie!
Sold
Just a GT
As long as "they" are okay - all is good. Man Ray - this was a STORM. The thunder blasts were like bombs! Lightening was freakish. No kidding. Rain overtook drainage in no time! This was NOT a normal Houston rain! My yard is a freaking lagoon!
Sent from my iPhone using Tapatalk
2009 G8 GT
628.5 RWHP on gasoline ---> ARH Long Tubes 1 7/8" & full exhaust / Magnaflow Mid Muffler / Cherry Bomb Vortex Mufflers / Magnuson 1.9 / Overdrive "non-cog" pulley system / Ported blower base / 2.70" Pulley / LS3 rockers with Trunion upgrade / Trick Flow x255 cylinder heads / 8-Rib Pulley system / Innovator West 10% Balancer / DOD Delete / Lunati Lifters / Custom CTS-V Patrick G Cam Grind / Wiseco Forged Rods & Pistons / Injector Dynamics 85lbs / 4.25" Air Intake Tube / 102mm TB & MAF Tube / 102mm TPIS Throttle Body / LS7 MAF Card / ZL1 Fuel Pump / JMS Fuel Pump Booster / VaporWorx Controller / B&M Tranny Cooler with fan / Circle-D Heavy Duty Rebuild & 265mm triple Disc Billet Converter / Camaro Tranny Pan/ Eibach Lowering Springs / BMR Front & Rear Sway Bars, LCA's, Control Arms / DBA 4000xs Rotors / Hawks Ceramic Pads
Stacy and her husbands apt. was 30 feet from Bray's bayou. I guess the bayou is bigger now. Shes still stuck in the hallway about her apt.
Rest in Peace Charlie!
Sold
Just a GT
Glad everyone was OK!
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
From someone who went through a flood first hand just last year, I feel for them. Glad they're safe!!!
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
RIP Charlie - GRRRR8Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Chris Wells - Panzer Leader
Posting Permissions
Reply With Quote
