OK so the other day my neighbor asked me about the G8 and asked me where I took it for work. Seems one of his co-workers has a G8 with Air conditioning issues.
SO I offered to look at it. Hooked up the gages and the low side and high side were around 140 - at 80 Degrees F. Even with AC turned on for around 3 minutes - the low side pressure never really lowered. High side did a bit.
belt is there - pulley turning. No blinking AC on the control panel and I didn't scan for codes - but I'm going to the next time I get to it. Supposedly my software will read the AC system.
Few questions - I know the compressor on this car has that variable plate system and not a standard on off clutch. and it's turning all the time. So short of the compressor having other major issues - it should be on.
As far as I know it's possible that the expansion valve is either clogged or ? and is not allowing the flow correctly. The owner said he put AC Pro refridgerat in it last year because it was low. He assumed it was low this year too.
Finally when I took the high pressure connection loose - the damn valve seems to have stuck - so it leaked down when I removed the connector. SO at a minium I need to fix that. Is that replaceable without replacing the whole hose assembly?