-
Serpentine Belt Installation Help
Cannot for the life of me get this belt on. Checked routing, checked part number, push tensioner, and no go. I can't get it to slide over the pulley, had to walk away. I'm hoping it will just slip on when I go back.
Tip or trick I'm missing? I've done dozens of belts before, wtf.
Sent from my XT1080 using Tapatalk
-
VIP Member
I do the water pump pulley last, that way you don't have to worry about a pulley lip... Are you replacing the belt with a new one or just putting yours back on?
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Charlie - GRRRR8
RIP Chris Wells - Panzer Leader
-
Member
^this should do the trick.
![](signaturepics/sigpic10438_2.gif)
2008 G8 GT
Vararam Intake, OBX 1 7/8" headers/X-pipe, Kooks Axlebacks, tuned using HPTuners
2001 Corvette (Playtoy)
H/C/I, stalled auto, 3.42 gear, Vararam intake, Kooks Headers/X-pipe, Borla catback.
2004 GMC Sierra 1500 (Daily)
K&N intake tube
-
Formerly HSV-GTS-300
Get a 15mm box wrench and put it on the central bolt of the top tensioner, now crank the wrench as hard towards the centre of the engine as you can....you'll feel the tensioner hit the stop. Now hold the tensioner against the stop (with rotational pressure on the wrench) and slip the belt on.
![](http://i2.photobucket.com/albums/y20/PerthPurplePenguin/DSC001.jpg)
Crazy Paul
Your Holden Parts Connection in Australia!
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
Member
He said he's pushing the tensioner in.
![](signaturepics/sigpic10438_2.gif)
2008 G8 GT
Vararam Intake, OBX 1 7/8" headers/X-pipe, Kooks Axlebacks, tuned using HPTuners
2001 Corvette (Playtoy)
H/C/I, stalled auto, 3.42 gear, Vararam intake, Kooks Headers/X-pipe, Borla catback.
2004 GMC Sierra 1500 (Daily)
K&N intake tube
-
Formerly HSV-GTS-300
![Quote](images/misc/quote_icon.png)
Originally Posted by
IMSOSLO
He said he's pushing the tensioner in.
Well there's soft-cock pushing and then there's cranking it fully against the stop.
I prefer the 2nd option.
Crazy Paul
Your Holden Parts Connection in Australia!
-
Member
Hahahahaha...fact. Soft-cock, that's a new one for me.
![](signaturepics/sigpic10438_2.gif)
2008 G8 GT
Vararam Intake, OBX 1 7/8" headers/X-pipe, Kooks Axlebacks, tuned using HPTuners
2001 Corvette (Playtoy)
H/C/I, stalled auto, 3.42 gear, Vararam intake, Kooks Headers/X-pipe, Borla catback.
2004 GMC Sierra 1500 (Daily)
K&N intake tube
-
So he needs to stop cranking his soft-cock? (snicker) Sorry, I couldn't help myself.
-
Thanks Paul, only good hard cock pushing here. That's the routing I was using, maybe this belt is a hair tight? I'll try the water pump pulley.
BTW Paul, we never got together on those holden baby clothes, I was waiting to add the other pieces from you to the order. Been crazy busy between work, house remodel, baby coming 7/25(aahh!), and everyday crap on top of that. I'll still take em off your hands if available, pay Friday if we can lock it down.
Sent from my XT1080 using Tapatalk
-
Damn near whooped my ass again. Should the tensioner be at maximum rotation with a new belt installed?![](http://img.tapatalk.com/d/14/07/14/6umuta4a.jpg)
Sent from my XT1080 using Tapatalk