Had to steal this from Board.
Hmmm, I wish the Hendrix rep had posted some pics of his own, over here.
http://www.g8board.com/forums/showth...085#post126085
First look at the Hendrix Drive-Shaft
Had to steal this from Board.
Hmmm, I wish the Hendrix rep had posted some pics of his own, over here.
http://www.g8board.com/forums/showth...085#post126085
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
Looks like a nice setup. I hope (crosses fingers) I won't need one of those too soon. All I know is that the drive shaft that I get will be torture tested that is for sure.
On a related note, I can now see the worth of the BMR tunnel brace and connectors. If we are going to stay with a 2-piece, they will strengthen the floor boards and tunnel where the carrier mounts.
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
I noticed that it has a larger carrier bearing which is good.
2008 Liquid Red Pontiac G8 Sport/Premium - Adams Polishes - American Racing Headers - ARP - BMR Fabrication - Circle D Specialties - COMP Cams - Crazy Paul - Dynojet - Earl's - Flowmaster - Fuel Air Spark Technology - G2 - GFORCE 1320 - Greg Weld - HP Tuners - JBA - Lingenfelter - Maverick Man Carbon - Metco Motorsports Solutions - Mickey Thompson - M&H - Mike Norris Motorsports - NGK - Pace Performance - Pedders USA - Powerbond - PSI - Russell - SBX Performance - SJM Manufacturing - SPOHN Performance - Tony Mamo - Vararam - Vector Motorsports - Wretched Motorsports - 470 RWHP 427 TQ - Engine Tune By Patrick G
You are going to have a 6M, right?Originally Posted by 99-LS1-SS
DRs and a happy left foot...
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
I wonder how strong that rubber piece can really be? Why did GM/Holden do that? Is it that much cheaper?
It has more to do with vibration and noise than cost.
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
It's probably more expensive actually, the rubber donut is to quell driveline noise it works quite well. Although one good launch for a converter car on slicks will probably hurt it
Yes on the M6.You are going to have a 6M, right?
DRs and a happy left foot...
Happy right foot for sure. I'll do some smoky burnout (videos will probably follow) but I cringe at the thought of a red line side stepping of the clutch.
Sometimes you just gotta got for it!
2008 Liquid Red Pontiac G8 Sport/Premium - Adams Polishes - American Racing Headers - ARP - BMR Fabrication - Circle D Specialties - COMP Cams - Crazy Paul - Dynojet - Earl's - Flowmaster - Fuel Air Spark Technology - G2 - GFORCE 1320 - Greg Weld - HP Tuners - JBA - Lingenfelter - Maverick Man Carbon - Metco Motorsports Solutions - Mickey Thompson - M&H - Mike Norris Motorsports - NGK - Pace Performance - Pedders USA - Powerbond - PSI - Russell - SBX Performance - SJM Manufacturing - SPOHN Performance - Tony Mamo - Vararam - Vector Motorsports - Wretched Motorsports - 470 RWHP 427 TQ - Engine Tune By Patrick G
Posting Permissions
Reply With Quote