Received this from Crazy Paul and installed it in 10 minutes. I needed a rear outlet for kids.
Received this from Crazy Paul and installed it in 10 minutes. I needed a rear outlet for kids.
2009 G8 GT, White, 1-7/8" ARH, Magnaflow axlebacks w/jpipes, Roto-Fab CAI, Livernois Stage 1 Cam, PCMforless Trans Cooler, UDP, Reckart Trunion Upgrade, Patrick G Remote Tune, HSRK, Catch Can, Fasterproms Stage 2 Ported TB/Manifold, 90mm MAF housing w/LS7 MAF, Spoon Trailing Arms & Toe Rods, SJM Line Lock, Driveshaft Loop. 423 hp/390 tq
TSS Sponser Car- TSS Atari Guage Overlay/LOTB Dash & Front Fender Emblems/Concept Pontiac Darts/Engine Plaque/Laser Engraved Headrests/Rear G8 GT Badge.
19x8 Front 19x9.5 Back TSW Strips w/255/275, MM Carbon Fiber Grill Surrounds, HID Headlights, LED DRL/Foglights & Front Sidemarkers, Clear Sidemarkers, Painted Lower Grills, GXP Rear Diffuser, Red Shifter, Shifter Boot & Armrest, Roto-Fab Radiator Cover, Crazy Pauls Billet Caps, ACC Under Hood Panel, BMR Rear Cradle Bushings
how much was it? I would like to buy one too
It adds to it. There is a plug already there, so just pop two covers off, unscrew 9 screws, push the cubby hole out that came stock, plug the plug in and reverse the procedure. It has a light that comes on when you open it too, it's the white circle in the right side of the ashtray.
I talked to CP and he said to contact him because he actually seperates the front and rear smokers kit to sell the rear part. He just doesn't want to get stuck with too many front pieces.
And yes is is that easy to install. I'm prone to break plastic clips on everything and I didn't break any. I didn't think to take pictures while doing it.
Last edited by 1meand; 04-07-2011 at 12:33 PM.
2009 G8 GT, White, 1-7/8" ARH, Magnaflow axlebacks w/jpipes, Roto-Fab CAI, Livernois Stage 1 Cam, PCMforless Trans Cooler, UDP, Reckart Trunion Upgrade, Patrick G Remote Tune, HSRK, Catch Can, Fasterproms Stage 2 Ported TB/Manifold, 90mm MAF housing w/LS7 MAF, Spoon Trailing Arms & Toe Rods, SJM Line Lock, Driveshaft Loop. 423 hp/390 tq
TSS Sponser Car- TSS Atari Guage Overlay/LOTB Dash & Front Fender Emblems/Concept Pontiac Darts/Engine Plaque/Laser Engraved Headrests/Rear G8 GT Badge.
19x8 Front 19x9.5 Back TSW Strips w/255/275, MM Carbon Fiber Grill Surrounds, HID Headlights, LED DRL/Foglights & Front Sidemarkers, Clear Sidemarkers, Painted Lower Grills, GXP Rear Diffuser, Red Shifter, Shifter Boot & Armrest, Roto-Fab Radiator Cover, Crazy Pauls Billet Caps, ACC Under Hood Panel, BMR Rear Cradle Bushings
Crazy Paul
Your Holden Parts Connection in Australia!
Finished installing my line lock and went out to test it. Works like a champ. I didn't have to do anything to the ABS to bleed it, all i did was drive down the street and slammed the brakes. Figured that would pump any air out. Going to the track tomorrow to test it out with the drag radials.
Atmospheric Acquisition
Sydney - 2009 G8 GT - Liquid Red, Onyx/Red interior, Flat Black Rally Stripes
Performance: Tuned By Me Using HP Tuners, TMS Forged 402, Ported LSA Supercharger 2.5/9.5, AIS Dual Nozzle Water/Methanol Kit, Super Chiller, ID850 Injectors, Rick C. Blower Cam, Morel Lifters, Comp Trunion Upgrade, Roto-Fab CAI, Kooks 1 7/8 Mids, Solo Mach Shorty Exhaust w/ 3.5" tips, CTS-V Torque Converter, Camaro 3.45 Diff, 6 Piston Front/4 Piston Rear Brembo Brakes, ZL1 Fuel Pump/BAP, Saikou Michi Dual Catch Cans, Spohn Trailing Arms & Toe Links, BMR Cradle & Diff Bushings, Derale Trans Cooler, SJM Line Lock.
Pictures
Slamming on the brakes won't remove any air in the lines, lol
Got her washed last night. Hoping for a nice weekend to go racing!