I'll jump on a few sets to help out...
I'll jump on a few sets to help out...
https://www.facebook.com/RickCrawfordRacing
2009 G8 GT-Rick Crawford- LS-4-SPEED@nc.rr.com
2.00 60ft 13.06 @ 106.65 w/ 1.85 SLP Rocker-HPTuner
1.97 60ft 12.97 @ 107.9 w/ 3.45 gears
1.97 60ft 12.87 @ 107.7 w/ 4"-2.5" exhaust
1.94 60ft 12.57 @ 111.9 w/ 217/225 Lunati cam
2.03 60ft 12.37 @ 115.3 w/ Doug Thorley headers
1.94 60ft 12.20 @ 115.0 w/ 219/233 Thumpr Cam
1.70 60ft 11.38 @ 121.5 w/ 100hp NOS Dry shot-HSW controller & 285/40 NT05 Drag Radials on stock 18's
1.72 60ft 11.65 @118.55 w/ 221/233 111LSA+0 Ported AirRam intake, Street tires. All Motor. DoD/AFM still functional.
1.66 60ft 10.87 @ 127.08 w/ 221/233 lunati, 2800 stall, 100HP wet nitrous shot, milled & ported LS3's.
1.65 60ft 10.81 @ 129.10 150Hp shot 2600 stall.
1.53 60ft 10.59 @ 129.72 ALL MOTOR! ! ! ! Fastest N/A G8 Record Holder
In for a set
2009 GT LR
404 Stroker RCR Top End Big Lunati on 112 Coan 3600 Stall - No times yet
RCR Top End Big Lunati Coan 3000 (flash 2400) - 11.76 @ 120 60' - 1.75
Lunati 231/239 on 111 11.35 @ 123 60' - 1.67 in 3000' DA
PTC 3800 Stall - ??
BMR bits in the rear Eiback springs all around 3.45's
OK, here is what we have so far:
1. wickedg8gt - full set
2. Dctg8 - full set
3. The Adam V - full set
4. JohnnyG2132 - full set
5. fengstang - full set
6. G8-4-Speed - X full sets
7. Stevesm943 - full set
8. Nate - full set
So we are sitting at 8 or more sets now. If you want some, post here by June 7th.
Last edited by TooManyHobbies; 06-06-2015 at 08:47 PM.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
I'm in for a set of drivers and passengers too please TMH
Sent from my iPhone using Tapatalk
2009 PBM G8 GT
Little Lunati. Kooks long tubes into Solo Mach cat-back Roto-fab CAI
FE3 Struts/Shocks Eibach springs Whiteline bushings and anti-roll bar
Rick Crawford tune
Wheelwell
I have ordered parts for these. I will let the interested parties the final price once they are welded together. After that you can paypal the money and I will ship out after I tweak and test fit each set. I will update this thread once I get more info on timing.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
Thanks
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
- ARANGO AUTOMOTIVE & TOWING SERVICES, WEBSTER NY
Thanks. Appreciate it.
An update. Most of the pieces arrived over a week ago. Still waiting on the laser cut tabs. They originally said they would be done last week, but they were not. They are working on them since they contacted me to clarify dimensions. The tabs should be done this week sometime. This order is small potatos for them. Then I can put a test set together to verify and adjust the fit. After that they can all be sent for welding. Still looking at a couple weeks before they are ready.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
Thanks for the update. No worries. Take your time
2008 NA G8 GT
1/4 mile = 10.93 @ 123
60' = 1.47
DA = 500
Naturally Aspirated-230/242 Cam-.030 Milled Heads-Valve Job-New Era Performance ECM/TCM tune-New Era Performance Ported Throttle Body-Vararam CAI-Rick Crawford Modified Intake Manifold-VMS HSRK-UD Pulley-MSD Plugs-4" MAF-Ram Air Plate-Circle D Triple Disk 4000-4200 245mm Converter-3.45 gears-1 7/8 American Racing Headers-Magnaflow mid muffler-SLP Lowering Springs in Rear-M&H Skinnies-Mickey Thompson ET Street Radials 295/45/17-Dark Star Rims
Got these in
Now that I have these I can test fit a set. I hope to get some drilling and bending of other parts done this weekend.
Rotohack 102 intake - 102 MAF - TPIS 102 TB - TVS1900 ported & plated w 8 rib 2.5" front + OD rear
PnP Interchiller - RCR ported heads - RCR Lunati 219/231 113+1 - Forged Bottom End
ARH 2" LT headers - Solo 3" CB - MT DRs + M&H FRs on Weld RT-S
CTS-V fuel w Vaporworx - FAST 85s - Alkycontrol meth M15 + M10 - RCR tune
9.75@139.2 ? rwhp ? rwtq
Posting Permissions
