CTS-V / Vaporworx Controller install

[jstclair]

And for comparison, the CTSV tank. I would imagine the float is located in the same spot in all 3 tanks... so?

I will update once I get into it so others will know ifn the stock Caddy lines work or not....

[Greg@PacePerformance]

The stock caddy line will be way to short to reach the metal G8 fuel line. The fuel line is up by the front/rear door pillar if I remember correctly. I think the custom lines that are used need to be about 26" long. I was selling them with 24" pre-made line, but it was very snug and longer was better.

Here is a pick of a V pump in a G8


And here is my install. (Don't mind the extra lines that are not hooked up)

[jstclair]

I will measure and take a look see when I get home in a couple weeks. There is a slot in the G8/Camaro tank that is unused on the G8 (looks like return line back to a Y?), I may be able to route the stock CTSV line there and make it longer...

But looking at pics I have all the fuel line connectors are in about the same area in comparison to the tank.