Site Sponsors & Vendors
Results 1 to 3 of 3

Thread: ZL1 and Bike Kills

  1. #1
    Junior Member
    Join Date
    Jan 2011
    Posts
    15
    Post Thanks / Like

    Default ZL1 and Bike Kills

    So as part of the weekend track event, there was a roll racing section on the super long straight of the course for people that just want to mess around. I was running the no prep heads up event for $$ and once I was out of that, I did some pulls with some people on the roll race section of the track before I left.

    The runs of note were a couple pulls with a ZL1 and a bike. With the ZL1 (stock I think) we started at 45 on the first run and 60 on the second run. I was running about 1200psi on the bottle so I was probably getting a little extra juice for these, but we started even on the first pull at 45 and nailed it. Took the trans a second to drop to 2nd and I pulled him up to 160. By the end of the first run, I had him by 5 cars or so. The second run, I gave him the hit and started a car behind and ended up a lot closer with edging him out by a car by 140 when we got out of it. I can only imagine his surprise...

    Not sure what the bike was, but it wasn't a liter bike. It was a Ducati of some kind because it sounded like a v-twin and had the distinctive tails. Started at 40 in second and he got me up until about 75 and I blew by him at that point. I didn't take it much past 130 on that run.

    It was a fun event. Wish I did as good on the money races as I did on the rolls, but the big boys were the ones running the drags.

  2. #2
    VIP Member STL_G8GT's Avatar
    Join Date
    Jul 2009
    Location
    Estes Park, CO
    Posts
    5,001
    Post Thanks / Like

    Default

    Mod list plz
    2009 PBM G8 GT
    Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
    Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
    TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
    Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul

    Originally Posted by TonyKarter
    Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
    RIP Charlie - GRRRR8
    RIP Chris Wells - Panzer Leader

  3. #3
    Junior Member
    Join Date
    Jan 2011
    Posts
    15
    Post Thanks / Like

    Default

    CAI, 219/232 RCR cam, RC tune, full exhaust, fuel upgrade, suspension stuff, 200 shot that day and other supporting mods.

  4. Likes G8GHOST liked this post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •