LS3 Engine Pics
Crazy Paul
Your Holden Parts Connection in Australia!
LS3 Engine Pics
I thought you were on holiday!?
LS3 baby!
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
It isn't June 26th yet
Len
White Hot 2009.5 Pontiac G8 GT
TVS1900 | Custom Texas Speed & Performance cam spec'd and remote tuned by Patrick Guerra | LS9 Injectors | Rotofab CAI | Corsa catback | Kooks 1-7/8" LTs with catted connectors
I couldn't remember when he said. 😉Originally Posted by LDM
Sent from my iDevice using data nodes and algorithms.
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
Ill take one
2009 Panther Black Metallic "The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installedCurt here
Posting Permissions
Reply With Quote
