depends. if you are going completely stock around 2K. more if the solenoid/valve body need replacing. if you start putting in other parts such as a Camaro pan, stronger intermediate shafts, new pumps, etc. it can go over 4K. but with the basics 2k give or take a couple of hundred dollars. pace performance used to have a smoking deal. a new transmission at 1500 plus 100 shipping. now it is 2k plus 100 shipping.
2009 g8gt - rotofab cai, ported throttle body & FAST intake, 1 7/8s kooks shorties with 3 inch exhaust. 3600 circle D triple disc stall and tranni cooler, udp, hoosier 17 inch drag radials. 223/235 cam/gmpp Heads. HP Tuners. 416 with 11.3 to 1 compression.
best time: 11.47 @ 118.7 3000 feet da
best top end 119.4 4000 feet da
I have a Century built and will be swapping to all stock clutches with one extra. I think I read a post that says I don't need to machine anything if century built previously. What are the clearances?
2008 White Hot G8 GT
(new)499RWHP/474RWTQ Mustang Dyno
(old)451RWHP / 498RWTQ Mustang Dyno
1/4=11.400@118.7 17" Drag Radials, stall, cam 1.77 60'
1/4=12.004@120.6 17" Drag Radials 2.03 60'
1/4=12.270 @118.3 on 18" All Seasons 2.08 60'
SLOWHAWK Tuned
If you can't say anything intelligent, say something loud and stupid
My Garage
I rebuilt mine myself and for the 3-5-R pack I went with between .050 and .080 if I can remember right. Thats using stock clutches, taking out the waved plate, and machining the clutch stand. You may want to ask Rick C or Century to verify.
I pmed g8-4spd last night that's rick c right?
Sent from my iPhone using Tapatalk 2
2008 White Hot G8 GT
(new)499RWHP/474RWTQ Mustang Dyno
(old)451RWHP / 498RWTQ Mustang Dyno
1/4=11.400@118.7 17" Drag Radials, stall, cam 1.77 60'
1/4=12.004@120.6 17" Drag Radials 2.03 60'
1/4=12.270 @118.3 on 18" All Seasons 2.08 60'
SLOWHAWK Tuned
If you can't say anything intelligent, say something loud and stupid
My Garage
Correct; Rick is G8-4-Speed.Originally Posted by G8GT721
2009 Hot White G8 GT, CTS-V v1 fronts, Camaro 20's, BMR Sways, Eibach Springs, Rear Cradle bushings. GXP FE3's, BMR rear susp. Kooks 1 7/8 LT headers, RCR custom 3” exhaust, ported LSA blower, 2.38 pulley; Ported heads and TB; LS7 MAF, Racetec pistons, Scat rods, CTS-V crank; FAST 85 injectors; RCR Lunati cam: 223/238 .615/.601, 116 +2 LSA. CTS-V pump/VaporWorx cntlr. Built trans, Methanol injection. Rick Crawford built and tuned. Best 1/4 9.68 @142, 1.42 60'.
Posting Permissions
Reply With Quote