Where does Charlie recommend installing the HSRK in a VaraRam? Look inside...
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
I have now relocated my HSRK to this spot.
Rest in Peace Charlie!
Sold
Just a GT
Originally Posted by RichsGreyGT
Relocating mine now.
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
Yeah I did mine a few weeks ago now.
Works well... Especially at speed. It's pretty impressive IMO.
Chris
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
HSRK + Vararam Optimal Placement??
I've read a bunch of threads on here regarding the HSRK placement, but I am undecided on the best place to install it. Is it better to put the HSRK in front of the filter or after the filter? I've got my Vararam coming and the HSRK will be here next week. Also, what size grommet do I need for the HSRK? Like to have everything ready for when it all arrives. Thanks!
2008 Panther Black G8 GT /w Premium Package + Sunroof
2005 Subaru Baja Turbo
?????
Look above your thread in the thread list...
It's a "sticky".
2011 Kona Blue 5.0 Auto -->(Livernois 93Tune and DR only-11.880 @ 118.11, 1.827) - Lund Racing Tune - BOSS Intake - JPC LTs&OTA, O/R-X, GT500muffs - CircleD 4500 - DSS shaft - DA QA1s - J&M LCAs - JPC UCA/BMR mount - 295/50/16 MT DRs - JLT Catch Can (awaiting install UPR K, TSS oil pump gears)
'08 Black on Black G8GT--> 12.166 @ 113.13, 1.723 Bolt 0ns and Converter --Gone, but not forgotten.--
http://img.photobucket.com/albums/v3...a/gr_devil.gif
Plastic Cuttin' Bad Ass!
The HSRK comes with its own grommet. And George is right, there's a sticky in this sub-forum showing where Charlie placed his HSRK. That placement has worked very well for me and dozens of others, so I'd call it effective.
2009 Liquid Red O/R M6 G8 GXP - Nickname: "The Yak"
Bought 5/21/2009, Sold 5/2/2015. Will be missed!
Daily Driver: 2013 Ford Focus ST
Hauler: 2005 Ford Excursion Powerstroke
Merged with the best thread for your question...
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
Posting Permissions
