Back seat rattle
I have a rattle coming from the back pass side of the car. I check it out today and I think it might be coming from the seat cushion bottom latch. If I grab the seat bottom and shake I am getting a sound almost like what I am hearing over bumps. Anyone else had this? Can the seat bottom be removed without removing the seat back?
2008 Panther Black Metallic G8 GT
2010 Camaro SS Wheels, Holden V8 Badges, Crazy Paul GPS Trim Package, Blacked Out Arrowheads, Red Calipers, Hawk HPS Pads, DBA 4000 T3 Rotors, Rebadged Trunk, 3.5" Stubby Antenna, Holden Engine Covers, Engine Cover Overlays, Engine Dress Up Items, Holden V6 Rad Cover, GXP Rear Diffuser W/Tinted Reflectors, Flips Tinted Tails, Hood Vent Mod, Grrrr8 IC Mod, Solo Mach Balanced Exhaust with 3.5" Tips and NEP OTR
Yes the back seat can me removed. I pull it out on a regular basis with all my fuel pump issues lmao. It is only latched in two places in the front. Slide you hand under neath and pull up..when you find the area with the most resisitance you found the latching point. Pull straight up hard and it will unlatch. then walk around to the other side of the car and do the same thing. Comes out in about 20 seconds.
Did you let your wife out of the trunk? (come on, it was right there)Originally Posted by BlueJacket
2009.1 Pontiac G8 GT
White Hot w/ Onyx interior, Prem Package, Sport Package, Sunroof
SHOW: Holden badges, backup assist, & gauges, front clip shaved w/ painted lower grilles, clear bra, matte black hood scoops, 35% tint, auto dimming mirror, Homelink, bass bias mod, VG antenna, VIM, Bluetooth, spare w/ Pace jack kit, glovebox light, white fuse covers, Rotofab radiator cover, engine cover custom painted w/ SS trim, billet aluminum trim, SS hood liner, MGP caliper covers, Third Shift Studios plaque, JBL MS-8, JL amps, Morel and Focal speakers, 12" sub, Redline Goods armrest
GO: Volant CAI, Superchips Cortex 91 tune, BP white catch can, modded lower grille, Solo axle backs; DBA 4000 series rotors; Russell SS brake lines; ATE Blue; Hawk ceramic pads, Camaro SS 20s 245/35F & 275/30R
0-60 MPH: 5.01 Seconds | 1/4 Mile: 13.354 Seconds @ 105.85 MPH | 279kW / 572Nm DynoJet uncorrected
Yeah, I've had this for a while but haven't gotten around to investigating it. If you find out let me know!!!
2015 White Hot Chevy SS - Sunroof/Spare/Stick - BTR Stage 3 cam, headers, intake *Traded 11/11/2023*
2018 GMC Sierra Denali 1500 - 6.2L, Ultimate Pack *Turned in 4/13/2021*
2016 Jungle Green Metallic Chevy SS - Sunroof/Spare/Stick *Traded 2/1/18*
2011 Radiant Silver Metallic CTS-V Wagon - Corsa Axleback, AirAid Intake *Traded 7/7/16*
2008 Panther Black Metallic G8 GT * Sold 6/10/14*
Thanks, I will pull it out and see if it goes away.
Will do
2008 Panther Black Metallic G8 GT
2010 Camaro SS Wheels, Holden V8 Badges, Crazy Paul GPS Trim Package, Blacked Out Arrowheads, Red Calipers, Hawk HPS Pads, DBA 4000 T3 Rotors, Rebadged Trunk, 3.5" Stubby Antenna, Holden Engine Covers, Engine Cover Overlays, Engine Dress Up Items, Holden V6 Rad Cover, GXP Rear Diffuser W/Tinted Reflectors, Flips Tinted Tails, Hood Vent Mod, Grrrr8 IC Mod, Solo Mach Balanced Exhaust with 3.5" Tips and NEP OTR
After the seat is out there is a trim piece coving the lower corner of the seat bottom that is only attached by one screw. If you move it around it makes a lot of noise, so I put some foam under it in a couple of spots. Also I check my onstar box in the trunk and it was hanging there by one clip, so I just removed it. After a quick test drive the sound seems to be gone.
2008 Panther Black Metallic G8 GT
2010 Camaro SS Wheels, Holden V8 Badges, Crazy Paul GPS Trim Package, Blacked Out Arrowheads, Red Calipers, Hawk HPS Pads, DBA 4000 T3 Rotors, Rebadged Trunk, 3.5" Stubby Antenna, Holden Engine Covers, Engine Cover Overlays, Engine Dress Up Items, Holden V6 Rad Cover, GXP Rear Diffuser W/Tinted Reflectors, Flips Tinted Tails, Hood Vent Mod, Grrrr8 IC Mod, Solo Mach Balanced Exhaust with 3.5" Tips and NEP OTR
Posting Permissions
Reply With Quote