******Gettysburg Tuning and Porting Aug 21-29******

[Fasterproms]

Hey everyone. Jeremy will be in PA at Keiths pitstop Tuning and porting from August 21-29.

The cost of tuning is $400 + 75hr for the dyno. If you are just looking for a street tune he can also do that for $300 w/ WB o2. We work very hard on each and every vehicle until every customer is happy and the vehicle is spot on.

We will have ported LS2/LS7 Intake manifolds for $300 and the LS2/LS7 throttle bodys for $150 all readily available. When they are done together it is discounted to $400. Installation is free!
The typical gains on the LS2 Intake manifold porting is 11rwhp/13rwtq. Porting the TB is a very nice SOTP difference, You will not see much of a gain on the dyno but your vehicle will be 10x more fun to drive and your throttle response will be greatly increased.
Porting the LS1 TB's is $100 installed. This will also greatly improve your throttle response. This is all on a core exchange basis.

If anyone is interested in having any headers or exhaust installed, we can get that done with enough notice, please call the shop to schedule an appt for this.

We will be requiring a $100 deposit to hold the spots.
Keiths Pitstop
2784 York Road
Gettysburg, Pa 17325
(717) 334-3153

Here are some graphs of some cars that we dynoed, tuned, and swapped the intakes and TBs. Some are direct A-B swaps and show the results. Some are Base runs then a rough tune and then we swap the intake and TB, and then fully optimize the tune.

1st is a Stk 07 LS7 ported and tuned: 1st is base, 2nd is base tune, 3rd is ported and tuned completely.
http://i28.photobucket.com/albums/c205/juicedss262/07LS7BaseTuneandPorted.jpg

Here is a bolt-on 07 LS7 (w/ headers CA)I base tune and then ported and tuned.
http://i28.photobucket.com/albums/c205/juicedss262/07LS7basetunetointake.jpg

Here are two C6 LS2's with just cai and cat backs before and after tune and Ported intake and TB:
http://i28.photobucket.com/albums/c205/juicedss262/C6stkLS2toportedLS2tuningtooptimize.jpg

http://i28.photobucket.com/albums/c205/juicedss262/C6stktuneandLS2manifoldtoportedLS2a.jpg

383 LS6 to ported FAST and nice set of heads:
http://i28.photobucket.com/albums/c205/juicedss262/383stkLS6toportedFAST.jpg

408 LS6 to ported FAST:
http://i28.photobucket.com/albums/c205/juicedss262/408LS6manifoldtoPortedFAST.jpg


Obviously the larger motors wanted the larger manifold more than a smaller motor but we have had an LS2 with one of our ported LS2s on it Put a ported FAST on there and pick up 22RWHP and 30RWTQ on a 6L bolt-on 07 vette.

[GeorgeInNePa]

Going to give Jeremy a call tomorrow...

[edmanet]

Going to give Jeremy a call tomorrow...

Let me know when you schedule. The shop is about 80 min from my house.
Maybe I can drive up.

[Devilish34]

Let me know when you schedule. The shop is about 80 min from my house.
Maybe I can drive up.

+1 It's an 2 hr dive for me but I'll do it if I can

[AUGAH]

When you get a chance, post your appointment date and time, easy for me to stop by and say hello, posibly a beer or two. I will post mine when set up. More than likely the 29th if available, at Bristol the first weekend and damn work gets in the way the rest of the week.

[GeorgeInNePa]

Let me know when you schedule. The shop is about 80 min from my house.
Maybe I can drive up.

Ok


+1 It's an 2 hr dive for me but I'll do it if I canOk


When you get a chance, post your appointment date and time, easy for me to stop by and say hello, posibly a beer or two. I will post mine when set up. More than likely the 29th if available, at Bristol the first weekend and damn work gets in the way the rest of the week.

Magic Word!!!

It's about 2 and half hours for me.

I want to talk with Jeremy and see what he thinks I can gain. I'm not going to do it for 3hp. ;) But I do think I'm running a bit rich and I'd like to get a dyno number for shits and giggles.

[Devilish34]

Ok

Ok



Magic Word!!!

It's about 2 and half hours for me.

I want to talk with Jeremy and see what he thinks I can gain. I'm not going to do it for 3hp. ;) But I do think I'm running a bit rich and I'd like to get a dyno number for shits and giggles.

MHO is isn't worth the trip and $$$ if you're not at the point hat you're done doing major mods..

[Fasterproms]

Devilish34- I strongly disagree, even a stk car can gain a tremendous amount of power and the trans will be very different. Much more aggressive than other tunes out there.
Please give me a call if you have any questions or concerns and I will do my best to answer them 813-495-8778.
Jeremy Formato

[Devilish34]

Devilish34- I strongly disagree, even a stk car can gain a tremendous amount of power and the trans will be very different. Much more aggressive than other tunes out there.
Please give me a call if you have any questions or concerns and I will do my best to answer them 813-495-8778.
Jeremy Formato

I agree 100%!!!! I only said that to George bc is working on getting a cam and maybe head work done soon.. :)

[Fasterproms]

Still have space available : Monday The 24th, Tuesday the 25th and Thursday the 27th are wide open, only Friday the 21st is almost booked up.

[Fasterproms]

Saturday bump.

[edmanet]

Ok

Ok



Magic Word!!!

It's about 2 and half hours for me.

I want to talk with Jeremy and see what he thinks I can gain. I'm not going to do it for 3hp. ;) But I do think I'm running a bit rich and I'd like to get a dyno number for shits and giggles.


Do you ever schedule an appt ??

[GeorgeInNePa]

Do you ever schedule an appt ??

No, like everything else, I put it off.

I'll try to call Mon or Tues.

[Fasterproms]

Wednesday Bump Day

[GeorgeInNePa]

Do you ever schedule an appt ??

8/24/09 @ 11:00am

[Fasterproms]

8/24/09 @ 11:00am

After I hung up with you George, I sid to Jeremy "THAT" George?!?! lol

Glad to have you going in to get it done George, thanks! :woohoo:

[GeorgeInNePa]

After I hung up with you George, I sid to Jeremy "THAT" George?!?! lol

Glad to have you going in to get it done George, thanks! :woohoo:

lol

Yes, "That" one.

[-Ray-]

That's the George we know and ........well, lets not go too far.

[Mike P]

George, what are you having done? :secret:


...

[GeorgeInNePa]

That's the George we know and ........well, lets not go too far.

Thanks, I think...

[GeorgeInNePa]

George, what are you having done? :secret:


...

Dyno Tune...

[kkhamil23]

I could possibly be doing it if I don't have to work.....c'mon let us have the week off.

[GeorgeInNePa]

w00t

[GRRRR8]

Is today the day George?

[GeorgeInNePa]

Yep, leaving now.

[edmanet]

Yep, leaving now.

If I wasn't stuck at work....I'd meet you there.

[Devilish34]

:watch:

[GeorgeInNePa]

I picked up 12.5 hp and lost the flare at partial throttle on the 1-2 and 2-3 shifts.

[AUGAH]

George,
Pleasure meeting you yesterday. Looking forward to having time to sit and have a beer, and of course shoot the shit some more. Car did not dyno like I thought she would, 323hp/322tq. Will see how she ends up after the mods on Saturday.

[Devilish34]

George,
Pleasure meeting you yesterday. Looking forward to having time to sit and have a beer, and of course shoot the shit some more. Car did not dyno like I thought she would, 323hp/322tq. Will see how she ends up after the mods on Saturday.

Are they tuning it on Saturday or ?

[GeorgeInNePa]

George,
Pleasure meeting you yesterday. Looking forward to having time to sit and have a beer, and of course shoot the shit some more. Car did not dyno like I thought she would, 323hp/322tq. Will see how she ends up after the mods on Saturday.

Yes, we need to get a "East Coast" thing together. The PA, NJ, MD, guys need to get a date and have a Regional get together.

The air temp was high yesterday and that auto isn't doing the hp figure any favors.


Remember, the only important numbers are the ET and the MPH.

;)

[caretaker]

Yes, we need to get a "East Coast" thing together. The PA, NJ, MD, guys need to get a date and have a Regional get together.

The air temp was high yesterday and that auto isn't doing the hp figure any favors.


Remember, the only important numbers are the ET and the MPH.

;)

Can the CT guy come too?

[AUGAH]

Are they tuning it on Saturday or ?

Tuning scheduled for 0900 on Saturday. Headers just arrived at the doorstep, so going to drop her off tonite. This may move the up the tuning schedule depending on when they complete the install. Will keep you posted.

[GeorgeInNePa]

Can the CT guy come too?


Sure.

[maxx355]

I had mine done on wednesday and picked up 28hp and 26 lbs ft with a ported intake, throttle body and a tune in 100 degree heat! I had no tune in the car before this.