ITBFST gets the bottle

[GRRRR8]

Always in the pursuit of more power and doing things a bit different, it is time to put the bottle on ITBFST.

Thanks to Nick, Matt and Mike @ HARRIS SPEED WORKS (HSW) for their help and information on which kit I needed and the additional things I would need.

Here are some pics of the kit. Its the Sudden Impact 90mm plate system.


http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05335.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05336.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05337.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05340.jpg

[norm8332]

Nice! Will it be ready for the 3rd?

[Devilish34]

Sweet!! I sure hope either way we'll have video of the runs
BlackBerry8330/4.5.0.77 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105

[GRRRR8]

No. The 3rd is motor only just the way it is. I have a few more things to buy for the install. I will probably start on it after I take this mini vacation.

[R.Penguin]

Dear Lord! As if it's not bad enuf for poor ITBFST to have to deal with the color of shame, now your gonna make her start hitting the bottle too? :eek:

I just can't take it ennymore! :rofl:

[GRRRR8]

You drove me to the bottle my feathered comedian. :drunk:

[jeppsG8]

Good looking kit. I want to see that car so bad. Red or not.

Please videos.

[locrzn#92]

How fast does the fuckin thing run, get er to the track and put the skinnies to the test. Then gas the bitch and let it eat.

[GRRRR8]

I am going on Friday!

[shane]

let me know how you like that kit, ive looked at it a few times.

[MANOFSTEEL69]

The use of steroids has been banned by Government Motors. Mandatory surrender of your bottle is immediately requested. Please mail to Whitehouse ASAP.

[GRRRR8]

Alternative fuels Jay. :)

[GeoffA]

Your gonna run out of room in your sig soon, Whats next? A maggie after all??

[locrzn#92]

Alright, its gonna run faster cause its red, thats a plus and good luck.

[Devilish34]

Your gonna run out of room in your sig soon, Whats next? A maggie after all??

Rockets

[GRRRR8]

BIG motor is next........then rockets! lol

[SpeedRacerX]

This looks awesome. I can't wait to read about the before and after time differences.

This type of kit have a window switch?

Also, what size jets/shot are you thinking?

[GRRRR8]

I am using HSWs All Out kit as well. It will be dialed in on a controller for my goal. I will start with the 75rwhp jets and see what it does. I will be waiting for it to get cooler out for sure. My goal is 10.70s with no more then a 125 shot. If it wont do it, it just wont do it. I have some other things planned for the car as well for fall.

[sweetair]

All that can be said here is Holy Hell! Bring it to the SSHS this Fall and take home the prize!

[Devilish34]

I am using HSWs All Out kit as well. It will be dialed in on a controller for my goal. I will start with the 75rwhp jets and see what it does. I will be waiting for it to get cooler out for sure. My goal is 10.70s with no more then a 125 shot. If it wont do it, it just wont do it. I have some other things planned for the car as well for fall.

Damn you!!!!!

[GRRRR8]

Damn you!!!!!


:secret: :nah: :secret: :nah: lol

Seriously, Pedders bolts for the rear so I can get camber where I want it on the launch. Some more tuning for the race Vararam set up. The nitrous install will be time consuming. I want to make a plate for the controller so I can put it flush fit where my DH currently is, then get creative with the fuel system for the nitrous. When all thats done I might put 3.45s and run 28in tall rear tires for a better footprint/rollout, but I have to figure out a 27in front tire 1st! Then a rollcage (after I get booted from the track) :)

[avintegrator]

Did anyone ever tell you that you have issues?

:theman:

[Devilish34]

:secret: :nah: :secret: :nah: lol

Seriously, Pedders bolts for the rear so I can get camber where I want it on the launch. Some more tuning for the race Vararam set up. The nitrous install will be time consuming. I want to make a plate for the controller so I can put it flush fit where my DH currently is, then get creative with the fuel system for the nitrous. When all thats done I might put 3.45s and run 28in tall rear tires for a better footprint/rollout, but I have to figure out a 27in front tire 1st! Then a rollcage (after I get booted from the track) :)

Do you have one now/are they available ?

And don't forget the line lock

[R.Penguin]

You drove me to the bottle my feathered comedian. :drunk:
But, 'yo momma tell me you wuz out on the Texas freeway on-ramps with 'yo crayon and cardboard sign when you wuz jes' 5 yr. old. Still has your first sign. "Will whine for wine!" :rofl:

[Punisher]

I'd really like to see the car after the install....goodluck on friday....pls videos or pics

[-Ray-]

Did anyone ever tell you that you have issues?

:theman:

Really. Seriously there is something wrong with this guy. LOL

[Devilish34]

Really. Seriously there is something wrong with this guy. LOL


I think hes trying to compensate for um you know

[Vertical]

Not Fair :(

[GRRRR8]

Do you have one now/are they available ?

And don't forget the line lock

I am testing one for them and a BIG yes on the line lock.

[GRRRR8]

I think hes trying to compensate for um you know

....Gigantor penis issue that robs the brain of blood and oxygen.

[wreckwriter]

Nice Charlie!

[SRG963]

....Gigantor penis issue that robs the brain of blood and oxygen.

roflmao

[g8gxp]

just curious as to why juice and not another FI system?

[GRRRR8]

just curious as to why juice and not another FI system?

My compression is almost 11.1 and I have a decent cam and head work. It just works better with this combo.

[GRRRR8]

Did anyone ever tell you that you have issues?

:theman:

I get that a lot. :)



Really. Seriously there is something wrong with this guy. LOL


:lies:

[wagon540]

My stuff came from Harris yesterday, now i just need the car back from Livernois so i cam put it on. Hopefully Monday. Measured twin bottle mounts for the spare tire well, maybe make those today.

[GRRRR8]

I think I am going the dual bottle route as well.

[TexasG8]

Charlie you beat me to it again. I was just going to order the sudden impact and all out kit next week but i still don't know what I wanted to do for the timing control. Are you going to be running The Interface Nitrous Controller for the timing or just turn the timing down with the hpt before spraying.

[GRRRR8]

I will have 2 tunes and 2 seperate fuel systems. The one for the nitrous will have 110 octane and the engine will have 2-3 gallons of 93 + 2-3 gallons of 110. I will be using the all out kit as well.

[TexasG8]

I think i am going to get The Interface Nitrous Controller for the timing since in the all out kit it only has the HSW MicroEdge Nitrous Controller which does not have an adjustment for the timing and I don't want to have vms sent me a nitrous tune and have to run on the street with low timing and the car feel like its dragging its ass.

[GRRRR8]

I have run 32 in my car with no KR and am at 29 currently. I dont plan on spraying it until the weather cools down a bit.

[G8GT721]

Did anyone ever tell you that you have issues?

:theman:

If you(charlie) build it they will come


....Gigantor penis issue that robs the brain of blood and oxygen.

lmao

[It's A G8!]

Nice!!!!!!!! Charlie what track you going too?

[GRRRR8]

Nice!!!!!!!! Charlie what track you going too?

Baytown. I plan on getting there early so I can swap tires and I will make my 1st pass when the sun goes down a little.

[GT-610]

bottles are for babies..real men get BLOWN!


hehee. :)

[JMorris]

Why not drink the bottle and get blown, would this be like being lactose intolerant and cause an explosion?

[GRRRR8]

I have had a turbo and nitrous on a car already. :devil:

[G8GT721]

was the ITBFAST cam ground with the intentions of being bottle fed, or did this just pop in your head one day?

[GRRRR8]

It was thought about from the begining and I got caught up in being the fastest at a certain level knowing full well how limited my time is to get to the track. So now I will get a time this Friday and see what it does in this heat and after that...........ALL IN! I will make a pass all motor in cold weather just to see how fast it is.

[G8GT721]

your talking texas cold, what is that 90

[roy@icon]

Are you going to run a stand-alone fuel system and if so is it going to be a low pressure system or a high pressure?

[GRRRR8]

Are you going to run a stand-alone fuel system and if so is it going to be a low pressure system or a high pressure?

It will be a low pressure system, easier to tune. There are some pretty trick kits available. I think the one for a Vette would fit down in my fender where my Roto use to sit.

[GeorgeInNePa]

Come up to Atco in October or November, then we'll see how fast it can be.

I'll cook...

[G8GT594]

o lord.... guess im a little more behind now :(

[GRRRR8]

o lord.... guess im a little more behind now :(

LOL! Your OK Paul. Our duel is based on all motor still. :)

[chiller2484]

is it Friday yet Charlie?

[GRRRR8]

is it Friday yet Charlie?

In about 35 hours I should be making a pass. :woohoo:

[Executor999]

Can't wait to hear the results. This is the moment everyone has been waiting for!!

[Nick@HSW]

Always in the pursuit of more power and doing things a bit different, it is time to put the bottle on ITBFST.

Thanks to Nick, Matt and Mike @ HARRIS SPEED WORKS (HSW) for their help and information on which kit I needed and the additional things I would need.

Here are some pics of the kit. Its the Sudden Impact 90mm plate system.


http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05335.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05336.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05337.jpg

http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC05340.jpg


Lookin good! Now we need pics of it on the car:headbang:

Nick

[JimmyJazz]

HRP is close Fri., Sat.,Sun.

[GRRRR8]

Lovely! I checked over a month ago and it was test and tune. Thanks for saving me a trip.

[GRRRR8]

It doesnt look like LMR is open either.

[ULTRA Z]

bottles are for babies..real men get BLOWN!


hehee. :)

titties are for babies also and well :)

[SFC]

Hope you have better luck than I have. I would never do business with them again.

I found a fault in their microcontroller and they refuse to cross-ship me a new one. Given their usual turn-around, that means I would be without my nitrous for two weeks. Or I can "just re-wire it". Because lord knows a fault in THEIR product should require me to pull apart the wiring I spent hours making clean the first time with loom and electrical tape.

Also have a faulty nitrous solenoid out of the box that almost blew up my engine, they also won't cross ship a new one of those. They told me I could take it apart and clean it, or send it in to have them clean it and send it back.

Piss poor customer service at best.

[GRRRR8]

This is stardard procedure on just about everything we buy. I do know it can be a pain in the ass, but what isnt. I dont know any nitrous company that will just send parts without getting their part back first. I am sorry you had a bad experience though.

[SFC]

This is stardard procedure on just about everything we buy. I do know it can be a pain in the ass, but what isnt. I dont know any nitrous company that will just send parts without getting their part back first. I am sorry you had a bad experience though.

When I offer to pay full price for the new part and tell them they can refund me when they get the "old" part back?

First company I've EVER had do that. It'd be one thing if it was working and *broke* under some sort of warranty. When it doesn't work out of the box, that's BS.

I wouldn't last a day in my industry if I pulled that shit.