GeoffA
06-26-2009, 09:18 PM
:woohoo: Says it all. A little refresher on my car, the saga begins (http://forum.grrrr8.net/showthread.php?t=7180)
So it is finally finished being painted and I went to pick it up today, looks good, you might never know it's been painted. Look at her shine
http://inlinethumb02.webshots.com/45313/2034033470036311313S600x600Q85.jpg
Now I have some parts sitting in my Garage that need to be insalled, and every one want to hear a stock GT with Pypes Violaters
http://inlinethumb18.webshots.com/43665/2440718330036311313S600x600Q85.jpg
so I went to town with my boy at my side:) got to start them off young. Remember I am/was Stock, no tune, 340 miles on her and been an owner for a month
http://inlinethumb55.webshots.com/43318/2753675960036311313S600x600Q85.jpg
Enjoy, I had fun today
the first vid I never put the key in the ignition after I remote started it, got a couple revs out of her and then she went dead...
gLuultIwjxw
He doesn't like that Big Box
http://inlinethumb04.webshots.com/43011/2169120890036311313S600x600Q85.jpg
http://inlinethumb01.webshots.com/24704/2979181730036311313S600x600Q85.jpg
FG67CHYUTCc
o3bMBYN225w
http://inlinethumb19.webshots.com/45074/2006048890036311313S600x600Q85.jpg
Pic is upside down, No there is nothing wrong with the exhuast it's the reflection of the crack on my garage floor.
Now time to install my Roto Fab off with the old
http://inlinethumb15.webshots.com/45582/2963276550036311313S600x600Q85.jpg
and in with the new
http://inlinethumb40.webshots.com/42023/2726079920036311313S600x600Q85.jpg
I only had one minor problem with a missing piece, an adapter flange. Called Roto Fab and (sorry I don't know the guys name) He said he'll ship it to me. I don't know how much it is really needed cause it worked without, but when I get it in the mail I will install it.
http://inlinethumb04.webshots.com/45443/2781769630036311313S600x600Q85.jpg
This install was really pretty easy, untill I dropped the Ground bolt down through the bottom of the Roto Fab housing :wacko:
Next, time to put in my Black with Black fitting Billet Catch Can.
http://inlinethumb24.webshots.com/42263/2451897370036311313S600x600Q85.jpg
I used JAMs (http://forum.grrrr8.net/showthread.php?t=7897) catch can review and got the install webpage from Billet (http://www.billetprototypes.com/G8_Catch_Can_Install.html)
http://inlinethumb55.webshots.com/43254/2554961390036311313S600x600Q85.jpg
This was an easy install, 20 minutes maybe.
Last I had to do Peterg22000s Lower Panel Mod (http://forum.grrrr8.net/showthread.php?t=6728&highlight=lower+panel+mod) This was a bitch.
http://inlinethumb41.webshots.com/42216/2851054220036311313S600x600Q85.jpg
But I got it done. I didn't paint behind it, and I have to clean up the honey comb a little more. I'll save that for a rainy day.
http://inlinethumb38.webshots.com/44005/2074626670036311313S600x600Q85.jpg
Oh and these too, American Racing Headers 1 7/8 w/cats still need to be installed:)
http://inlinethumb57.webshots.com/33400/2808080820036311313S600x600Q85.jpg
Hope you all enjoy.
So it is finally finished being painted and I went to pick it up today, looks good, you might never know it's been painted. Look at her shine
http://inlinethumb02.webshots.com/45313/2034033470036311313S600x600Q85.jpg
Now I have some parts sitting in my Garage that need to be insalled, and every one want to hear a stock GT with Pypes Violaters
http://inlinethumb18.webshots.com/43665/2440718330036311313S600x600Q85.jpg
so I went to town with my boy at my side:) got to start them off young. Remember I am/was Stock, no tune, 340 miles on her and been an owner for a month
http://inlinethumb55.webshots.com/43318/2753675960036311313S600x600Q85.jpg
Enjoy, I had fun today
the first vid I never put the key in the ignition after I remote started it, got a couple revs out of her and then she went dead...
gLuultIwjxw
He doesn't like that Big Box
http://inlinethumb04.webshots.com/43011/2169120890036311313S600x600Q85.jpg
http://inlinethumb01.webshots.com/24704/2979181730036311313S600x600Q85.jpg
FG67CHYUTCc
o3bMBYN225w
http://inlinethumb19.webshots.com/45074/2006048890036311313S600x600Q85.jpg
Pic is upside down, No there is nothing wrong with the exhuast it's the reflection of the crack on my garage floor.
Now time to install my Roto Fab off with the old
http://inlinethumb15.webshots.com/45582/2963276550036311313S600x600Q85.jpg
and in with the new
http://inlinethumb40.webshots.com/42023/2726079920036311313S600x600Q85.jpg
I only had one minor problem with a missing piece, an adapter flange. Called Roto Fab and (sorry I don't know the guys name) He said he'll ship it to me. I don't know how much it is really needed cause it worked without, but when I get it in the mail I will install it.
http://inlinethumb04.webshots.com/45443/2781769630036311313S600x600Q85.jpg
This install was really pretty easy, untill I dropped the Ground bolt down through the bottom of the Roto Fab housing :wacko:
Next, time to put in my Black with Black fitting Billet Catch Can.
http://inlinethumb24.webshots.com/42263/2451897370036311313S600x600Q85.jpg
I used JAMs (http://forum.grrrr8.net/showthread.php?t=7897) catch can review and got the install webpage from Billet (http://www.billetprototypes.com/G8_Catch_Can_Install.html)
http://inlinethumb55.webshots.com/43254/2554961390036311313S600x600Q85.jpg
This was an easy install, 20 minutes maybe.
Last I had to do Peterg22000s Lower Panel Mod (http://forum.grrrr8.net/showthread.php?t=6728&highlight=lower+panel+mod) This was a bitch.
http://inlinethumb41.webshots.com/42216/2851054220036311313S600x600Q85.jpg
But I got it done. I didn't paint behind it, and I have to clean up the honey comb a little more. I'll save that for a rainy day.
http://inlinethumb38.webshots.com/44005/2074626670036311313S600x600Q85.jpg
Oh and these too, American Racing Headers 1 7/8 w/cats still need to be installed:)
http://inlinethumb57.webshots.com/33400/2808080820036311313S600x600Q85.jpg
Hope you all enjoy.