CEL Code

[GEE8GEETEE]

Charlie, I had a CEL come on a little while ago and finally had a chance to hit up Autozone to get it checked. Code came back P0315.

Definition: Crank Sensor Condition

Explanation: The crankshaft position sensor signal is monitored for errors

Probable Cause: Cranks sensor defective
Check connector and wiring to sensor
Check trigger wheel for damage

I'm too familiar with these items so I was wondering what your thoughts were. Also, has this been a problem for anyone else ?

Thanks, Glenn

[GRRRR8]

Have you replaced the ecm recently? It needs the cam/crank reference relearn done. It can be done with a dashhawk if you have one.

[GEE8GEETEE]

I did the ecm swap about 4 months ago and no light came on......so i didn't get around to doing the relearn yet. Kirk said it wouldn't be from the tune since it didn't come on right away.

[GRRRR8]

Thats what that code is for.

[GEE8GEETEE]

OK thanks, that's what I originally thought. So I'm assuming it won't hurt anything till I get it done correct ?

[GRRRR8]

OK thanks, that's what I originally thought. So I'm assuming it won't hurt anything till I get it done correct ?

Correct.