Question about CAI

[ThugHunter]

Those of you that have the New Era OTR intake please chime in. All it takes is one response to a simple question. I have only seen pictures of this unit without the factory engine cover. Does the engine cover not fit with this intake?

I'd like to keep a factory look in the engine compartment, which means I'm strongly considering the Roto-Fab rather than the New Era OTR. The Roto Fab looks the best, IMO, but I know the OTR will likely produce higher HP.

[SRG963]

Those of you that have the New Era OTR intake please chime in. All it takes is one response to a simple question. I have only seen pictures of this unit without the factory engine cover. Does the engine cover not fit with this intake?

I'd like to keep a factory look in the engine compartment, which means I'm strongly considering the Roto-Fab rather than the New Era OTR. The Roto Fab looks the best, IMO, but I know the OTR will likely produce higher HP.

FYI: New Era also makes a side mount CAI which works GRRRR8 :)

[MANOFSTEEL69]

Yes, the Intake Cover fits....I just put mine on to check. Running short on time or I'd post a pic for you. I don't normally run with mine on. It didn't work with the old New Era CAI though...I just never thought to try with the new one :)

[SRG963]

Yes, the Intake Cover fits....I just put mine on to check. Running short on time or I'd post a pic for you. I don't normally run with mine on. It didn't work with the old New Era CAI though...I just never thought to try with the new one :)

Really, mine fits just fine with the side mount
http://i297.photobucket.com/albums/mm227/srg963/block%20off%20panel/PA160343-1.jpg

[MANOFSTEEL69]

Mine was fabbed at the shop and the cover wasn't factored in.
BlackBerry9530/4.7.0.109 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105

[NWOG8]

Mine fits perfectly!

[66goat]

Mine fits great. VMS tune and New Era OTR. The car sounds great...

[GEE8GEETEE]

The only difference with the OTR Intake from stock fitment is the new hose running to the passenger side valve cover. I'll post a pic up showing you mine post install with cover on @ lunch.

[GEE8GEETEE]

Picture of entire Layout:

http://i18.photobucket.com/albums/b113/gr69eht/252020086789.jpg


Close-up of Hose running under engine cover:

http://i18.photobucket.com/albums/b113/gr69eht/252020146693.jpg

[MANOFSTEEL69]

Here's a quick pic of mine......The OTR is going in tomorrow to get painted to match as well as some interior pieces.

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8004.jpg

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8005.jpg

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8006.jpg

[NWOG8]

Here's a quick pic of mine......The OTR is going in tomorrow to get painted to match as well as some interior pieces.

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8004.jpg

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8005.jpg

http://i354.photobucket.com/albums/r424/MANOFSTEEL69/G8006.jpg


Jay,
That should look sweet with the intake painted to match the cover!
Jeff

[MANOFSTEEL69]

That's what I'm thinking. Figured I have to buy a quart of the paint anyways so I'll trick out a few other things as well! ;)
Off to the body shop!
http://i354.photobucket.com/albums/r424/MANOFSTEEL69/P2280001.jpg

[MANOFSTEEL69]

Added my side white marker lights to the "to be done collection". The white just looks way out of place on the IOM.

[NWOG8]

I need to see it once it's done.

[MANOFSTEEL69]

No problem Jeff! Will be a week on the pieces parts, and a week or so up at Livernois for the heads. Then I'll bring it to you and take you for a spin! :)

[NWOG8]

Cant wait:)

[ThugHunter]

Picture of entire Layout:

http://i18.photobucket.com/albums/b113/gr69eht/252020086789.jpg


Close-up of Hose running under engine cover:

http://i18.photobucket.com/albums/b113/gr69eht/252020146693.jpg

That looks sharp!!