Need help with rim sizes

[Joeygr8gt]

I might be buying a set of 20 X9.5 front rims with a 35 offset. And 20x10.5 with a 45 offset rear. I'm lowered on H and R springs and with a 15 mm spacer in the rear I slightly rub with the 285 tire over bumps. I concern is with the 10.5 rim it's going to be wider than the 285 tire what size tires should I get. Also the front rim only has an inch from the inside of the rim to the strut is that okay


Sent from my iPhone using Tapatalk

[missan nissan]

roll you fenders...and I bet they will still rub.. from what I have read in the past 10's rub.

[-Ray-]

The problem is there is not enough offset. Spacing it makes it worse.

[BuildItYourSelf]

Even with your spacers off you'll still rub.
You might get away with a rolling your fenders.

[gear7979]

And if you roll the fenders on your own using the bat technique, the key is slow slow slow, you can chip the paint.

[ModBargains]

That fitment will almost certainly rub even with a fender roll. In order to fit that 10.5" rear you would need something like a +52 to +55 to give you the clearance in the rear and even then you would need a nice smooth sidewall tire to get it to clear with no issues. I have done a few sets like this and its doable but you need to do the extra work ;) I just finished a set of Forgestars with the proper rear offset and the customer is clearing 295 Michelin PSS with a fender roll.