Zl1 1le wheels on my g8 gt

[silverbull1t]

I did a 20 inch wheel staggered 20x10 Rear 20x9 Front with Camaro offset. I like it alot let me know what you all think....21401214022140321404

[STL_G8GT]

I think it looks real good... Maybe a straight on side shot with plenty of light? Your pics are great for stance, but not so much for design of the wheels.

[BuildItYourSelf]

Damn. I think they look better on the g8 then the camaro.
Who would have thunk it. Haha looks great.

[richm52]

Looks good. What size tires are you running!


Sent from my iPhone using Tapatalk

[Slizzo]

Rears look quite aggressive, but looks good.

[hartigan85]

Any rubbing? Where did you get them from?

[silverbull1t]

It did rub but i did a small fender roll and no more rub!! i got them from phastekperformance
Any rubbing? Where did you get them from?

[silverbull1t]

im running 285 30 and 255 35
Looks good. What size tires are you running!


Sent from my iPhone using Tapatalk

[liquidredg8]

What are the offsets on those wheels?

[silverbull1t]

Camaro factory offset
What are the offsets on those wheels?

[MongosG8]

Not a fan of black but ..Huge fan of the style and aggressive stance. They look great!

I like them much better then the camaro 20s I have on my G8. How were the cost? Fair?

[Zodiac]

Need better pics from the side and in better lighting. Can't tell a whole lot from those.

[donkeyGT]

Camaro factory offset Which would be the same as the 2010/11? Correct if I'm wrong but I think mine are 35F 40R.

[Silver Bullet]

Hey man where at in AR are you located? Wheels look good.

[liquidredg8]

The factory camaro offset is different for the different style of wheels, and to my knowledge the factory ss wheels are x8 in front and x9 in the back, while the zl1 wheels are x10 in front and x11 in the rear so your offsets must be different than the stock offsets.

[It's A G8!]

I was waiting for someone to try this. I thought about doing this but had already spent my wheels money. Looks good.

[Livernois Motorsports]

Very sharp ride! I wasn't sure how they would look but I think they do look awesome on there.

[silverbull1t]

my offsets are the same just because the wheels are wider doesnt mean the offset changes the offset is the back spacing on the wheel not the width of it
The factory camaro offset is different for the different style of wheels, and to my knowledge the factory ss wheels are x8 in front and x9 in the back, while the zl1 wheels are x10 in front and x11 in the rear so your offsets must be different than the stock offsets.

[silverbull1t]

Thanks
I was waiting for someone to try this. I thought about doing this but had already spent my wheels money. Looks good.

[silverbull1t]

Correct
Which would be the same as the 2010/11? Correct if I'm wrong but I think mine are 35F 40R.

[Slizzo]

my offsets are the same just because the wheels are wider doesnt mean the offset changes the offset is the back spacing on the wheel not the width of it

Offset changes with the change in width of wheel. Camaro rears are 20x9 +35, ZL1 are 20x11 +39. Backspacing is different as well due to the wider wheel.

[SpeedRacerX]

The ones sold by Phasetek in this style are:

20x9: +27 offset.
20x10: +23 or +35 offset.

They also make a 20x11 +43 offset.

Silverbull1t: they look GREAT.

[SRG8]

What offset is Silverbull1t running in the rear?

These look great Silverbull1t!

[donkeyGT]

Offset changes with the change in width of wheel. Camaro rears are 20x9 +35, ZL1 are 20x11 +39. Backspacing is different as well due to the wider wheel. Slizzo I thought the Camaro 20x9 were +40?

[Slizzo]

Slizzo I thought the Camaro 20x9 were +40?

You're right, I mixed it up with the front wheel (which is on a +35et offset).

[silverbull1t]

Slizzo I thought the Camaro 20x9 were +40?

They are

[silverbull1t]

Offset changes with the change in width of wheel. Camaro rears are 20x9 +35, ZL1 are 20x11 +39. Backspacing is different as well due to the wider wheel.

Where do you get this info these aren't factory zl1 wheels. They are 20x10 with camaro ss offset +40 . That's self explanatory just look at the wheel. Why do you think when ppl get there camaro as wheels widened the offset stays the same

[BuildItYourSelf]

Offset is measured from center line not "backspacing"
If you take a wheel and widen it. You must add the added width to the offset.
Ex: start with 19x10 +40 and widen it 25mm or an inch* you get 19x11+65.
*I know 25mm don't equal and inch. Its OK to round the .0157"

[Slizzo]

Where do you get this info these aren't factory zl1 wheels. They are 20x10 with camaro ss offset +40 . That's self explanatory just look at the wheel. Why do you think when ppl get there camaro as wheels widened the offset stays the same

Saying that they aren't factory is good, but without knowing the true specs of the wheel we can't tell you if they'll work well or not. A 20x10 +40 will rub the fender unless you roll, and possibly pull the fender a little as well.

Offset does NOT stay the same (as mentioned below) when you widen the wheel. The offset changes with the added width as you're changing the centerline of the wheel (which is where offset measurement comes from: it's the distance of the mounting pad to the center of the wheel.)

[BuildItYourSelf]

Why would he need to know if they work or not?
He put them on his car. Unless I'm missing something.

[BuildItYourSelf]

I think slizzo just got the wrong idea. You saying the offset is the same can be true. (Same offset number on the replica wheels and stock ss)
You have to watch your wording on these fourms a lot of people tend to jump on ones ass in anyway they can. And change crap around on ya to make themself feel like they weren't wrong.

[silverbull1t]

They are on my car they work i have 20x10 +35 and 20x9 +27 rolled rear fenders mild roll no pull factory ride height
Why would he need to know if they work or not?
He put them on his car. Unless I'm missing something.

[Low_psi]

I love the look. I just bought a set of 19" wheels, but thought long and hard about going this route. But with the bad roads I drive on, I thought the ride would be to harsh...... But since I get bored fast, I might look to go this route next summer. Looks awesome! Great job.

[getyou1]

I'm running the same wheel in a polished finish but a squared set up. Do you think the concavity is deeper on the the 20x10 than the 20x9?

[getyou1]

Sorry that last question was for silverbull1t with the zl1 replica wheels from phastek performance