PDA

View Full Version : Basic GM parts list for rebuilding a 6L80E + extra clutch option


G8-4-Speed
09-17-2013, 06:45 AM
http://parts.nalleygmc.com (http://parts.nalleygmc.com/)
Pull up our trans and they list all the retaining rings available. I believe the ones needed:

24233407- 4-5-6 thin ring ** extra clutch option
24240194- 3-5-R thin ring *** you have to machine the clutch stand or end plate to get clearance on this clutch pack for the extra clutch and steel.
fiber kit- 24248008
Seals- 24260143
1-4 steels- 24258080- 5ea
3-5-R-steels 24258082 -5ea (only 4 required for stock configuration)
4-5-6 steels 24258083- 7 ea (only 6 required for stock configuration)
3-5-R fiber 24235681 - 1 ea * for extra clutch option
4-5-6 fiber 24224158 - 1 ea * for extra clutch option
Deep pan kit with filter and seal - 24250062
blue-mayhem
12-16-2013, 03:30 AM
Thanks for this info Rick.
kj217
12-16-2013, 04:22 AM
should i remove the wave plates of 3-5-R and 4-5-6 for extra clutches and steels?
gtp6515
12-16-2013, 06:46 AM
Specialty tools needed?
Posidon42
12-16-2013, 05:28 PM
You need one VERY large set of o-ring pliers (see my rebuild thread) and a special tool to remove the lower set of clutches. The second one is optional but makes it much easier to reinstall.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)
gtp6515
12-16-2013, 05:41 PM
You need one VERY large set of o-ring pliers (see my rebuild thread) and a special tool to remove the lower set of clutches. The second one is optional but makes it much easier to reinstall.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

Ty
Torqued
12-18-2013, 04:13 PM
I'm at 90,000 now and my shift flare has become more present. Would the parts above address this issue? Thanks.
kj217
12-18-2013, 04:29 PM
does the 6L90 use the same number/type of clutch/steel?
G8-4-Speed
12-23-2013, 04:21 AM
does the 6L90 use the same number/type of clutch/steel?


Not sure, very possible.
G8-4-Speed
12-23-2013, 04:23 AM
I'm at 90,000 now and my shift flare has become more present. Would the parts above address this issue? Thanks.

Must be a part-throttle flare. Could be worn or just need a better tune.
G8GT721
02-27-2014, 04:57 PM
fiber kit- 24248008
Seals- 24260143
3-5-R-steels 24258082 -5ea (only 4 required for stock configuration)

I couldn't pull these up on Nalleys website, but found them on RockAuto etc. any idea why?
G8GT721
03-01-2014, 02:42 PM
Anyone?


Sent from my iPhone using Tapatalk 2
G8-4-Speed
03-01-2014, 08:44 PM
Call Greg at Pace Performance....
D00by
03-06-2014, 02:14 AM
Call Greg at Pace Performance....

Yes what Rick said, hes gotten our tranny parts many times.
desertg8
04-28-2014, 07:46 AM
Yes what Rick said, hes gotten our tranny parts many times.


Rick,

Can Mike from Tucson Transmission give you a call next week?

Alan
desertg8
04-28-2014, 11:18 AM
Rick,

Can Mike from Tucson Transmission give you a call next week?

Alan

Mike is being cool. He will buy all the parts. Make all the adjustments. He will just charge me for the parts.
G8GHOST
09-10-2015, 11:07 PM
Mike is being cool. He will buy all the parts. Make all the adjustments. He will just charge me for the parts.


Sent from my SAMSUNG-SM-G900A using Tapatalk