View Full Version : Infinity Kappa 62.11i
blue-mayhem
06-26-2013, 03:34 AM
Anyone know if these will fit in our cars.
Infinity Kappa 62.11i
6-3/4" 2-way car speakers
Plus One+ glass-fiber woofer cone with hi-roll rubber surround
1" edge-driven, soft dome tweeter
included brackets allow mounting in a variety of 6-3/4" and 6-1/2" openings
2-ohm impedance
power range: 5-75 watts RMS (225 watts peak power)
frequency response: 45-25,000 Hz
sensitivity: 95 dB
top-mount depth: 2-1/8"
terryscott621
06-26-2013, 09:41 AM
I'm running the Kappa 62.9i's and those fit. It looks like the 62.11i's may be the newer version of the 62.9i's. I was looking at the specs of both, but I can't find the bottom mount depth for the 62.11i's. The top mount depth on the 62.11i's is less than the 62.9i's, so you're good there. I'm thinking they'll fit based on the specs I'm comparing. It would be nice to know the bottom mount depth to make sure though.
62.9i Specs:
Speaker Size 6-1/2"
Design 2-way
Tweeter Design Dome
Tweeter Composition MMD (Metal Matrix Diaphragm)
Woofer Composition Woven Glass Fiber
Woofer Surround Rubber
Peak Power Handling 225 watts
RMS Power Handling 75 watts
Sensitivity 95 dB
Frequency Response 45 - 25000 Hz
Impedance (Per Voice Coil) 2 ohms
Shallow Mount Installation No
Top-Mount Depth 2-5/16"
Bottom-Mount Depth 3-1/8"
Cutout Dimensions 5-1/8" x 5-1/8"
Speaker Grilles Yes
Warranty and Return Policy
Return Policy Standard Return Policy
Parts Warranty Duration 1 year
Labor Warranty Duration 1 year
Warranty Provider Manufacturer
blue-mayhem
06-26-2013, 10:55 AM
Yeah I couldn't find the bottom mount depth neither, but I'm thinking they will work. I like these because they don't have that pig tail where you hookup the wires like the 62.9's.
blue-mayhem
06-28-2013, 03:52 AM
I ordered a set of these. I'll see if they fit if anyone is interested.
hazards280
03-30-2015, 07:19 PM
I ordered a set of these. I'll see if they fit if anyone is interested.
Sorry to wake this thread from the grave, but did you happen to find out if these fit?
SRG963
03-31-2015, 04:14 AM
The 6 1/2" will fit, the 6 3/4" don't.
hazards280
03-31-2015, 04:55 AM
The 6 1/2" will fit, the 6 3/4" don't.
Perfect! Thanks SRG963. What did you think of the 62.11i Kappas? Any different from the 62.9i's in terms of sound?
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.