PDA

View Full Version : BMR Launches New Product - G8 Trailing Arms (TCA026)


BMR Suspension
02-04-2009, 12:10 AM
BMR Fabrication Trailing Arms for the Pontiac G8



Stabilize your Pontiac G8 caster settings and minimize wheelhop under performance driving conditions with a set Trailing Arms from BMR Fabrication. Superior to the factory stamped steel arms, BMR Trailing Arms are composed of 1” x 2” x .120 wall rectangular steel and 3/16” CNC laser cut steel plates. In contrast to the open factory rubber bushings, the BMR Trailing Arms (TCA026) utilize fully-fluted, greaseable, low-deflection polyurethane bushings for fluent operation. Available in black hammertone or red powdercoat finishes.

To preview all of BMR’s high-performance suspension parts, please visit www.bmrfabrication.com, email sales@bmrfabrication.com, or contact them at BMR Fabrication, 12581 US Highway 301 North, Thonotosassa, FL 33592, 813-986-9302, Fax: 813-986-8055.
GRRRR8
02-04-2009, 06:38 AM
If its RED its gotta be good!
99-LS1-SS
02-04-2009, 06:39 AM
But your engine is SILVER. :)
GRRRR8
02-04-2009, 07:24 AM
But your engine is SILVER. :)

Thats the extra tenth I am losing! :nah:
MojaveG8
02-04-2009, 02:29 PM
I feel like I am replacing the whole suspension one part at a time and I like how my car drives.
edmanet
02-21-2009, 12:39 PM
Anyone install these ??? Opinions please !!!
conipc
02-21-2009, 01:50 PM
Helped sharpen the rear end response a tiny bit and reduced wheelhop. Easy enough to install....
Ktlplxm
02-21-2009, 05:23 PM
Anyone install these ??? Opinions please !!!

Very simple install. Pretty straight forward, just make sure to turn the grease fittings the right way first time.
GRRRR8
03-05-2009, 05:36 AM
I got mine! RED!! Thanks Jay/BMR!
99-LS1-SS
03-05-2009, 06:01 AM
I'm going to get these. Anything to help reduce wheel hop. My car is a wheel hopping MF'er.
GRRRR8
03-05-2009, 06:22 AM
I'm going to get these. Anything to help reduce wheel hop. My car is a wheel hopping MF'er.

Whats your rear air pressure?
99-LS1-SS
03-05-2009, 06:30 AM
It's high. I haven't adjusted it from what the factory did. I keep forgetting. Will high pressure create hop?
GRRRR8
03-05-2009, 06:34 AM
It's high. I haven't adjusted it from what the factory did. I keep forgetting. Will high pressure create hop?

Try 36 and let me know when you get a chance.
99-LS1-SS
03-05-2009, 06:35 AM
They are hovering around 43 lbs right now.
GRRRR8
03-05-2009, 06:42 AM
They are hovering around 43 lbs right now.

Thats some of your issue!
99-LS1-SS
03-05-2009, 06:44 AM
I've got to go run some errands so I'll adjust it and "test" it.
-Ray-
03-05-2009, 06:45 AM
Someone needs to clean this thread now. LOL
99-LS1-SS
03-05-2009, 06:46 AM
I still plan on getting the arms...:)
edmanet
03-05-2009, 07:05 AM
Ordered mine on MON.
99-LS1-SS
03-05-2009, 03:11 PM
The lower tire pressure seemed to help in a burnout situation. When I'm on the ragged edge of traction it still hops. I'm sure that will have to be addressed with suspension mods.
99-LS1-SS
03-06-2009, 05:58 AM
Any coupons or discounts for these? I want to order them today.
MANOFSTEEL69
03-06-2009, 06:53 AM
Intrested as well, and I might throw in the strut tower brace, if it will clear the Maggie in the future. ;)
conipc
03-06-2009, 07:50 AM
No clearance for 'charger---you can't even get the stock engine cover off with the STB on.
As to discount, call BMR direct :)
wreckwriter
03-06-2009, 08:53 AM
Intrested as well, and I might throw in the strut tower brace, if it will clear the Maggie in the future. ;)

Looks like it might clear Maggie, definitely will not clear Procharger.
MANOFSTEEL69
03-06-2009, 09:02 AM
Just ordered mine...151 shipped. I went with black, red slows me down ;)
BlackBerry9530/4.7.0.109 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105
GRRRR8
03-06-2009, 09:12 AM
Just ordered mine...151 shipped. I went with black, red slows me down ;)
BlackBerry9530/4.7.0.109 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105

Damn! If thats the case I am going to have a 17sec car! lol
MANOFSTEEL69
03-06-2009, 10:43 AM
Somehow I doubt that :)
BlackBerry9530/4.7.0.109 Profile/MIDP-2.0 Configuration/CLDC-1.1 VendorID/105
Ktlplxm
03-06-2009, 12:49 PM
if someone wants a STB I'll sell mine, they are purely cosmetic
-Ray-
03-09-2009, 05:37 PM
My trailing arms will be here tomorrow! :)
GRRRR8
03-09-2009, 05:43 PM
My trailing arms will be here tomorrow! :)

So will a package from me! :woohoo:
-Ray-
03-10-2009, 05:10 AM
Sweet!
Ktlplxm
03-10-2009, 06:56 AM
I don't have any wheel hop issues with them installed, but I never had them before either... maybe I don't have the power everyones else has hahaha
GRRRR8
03-10-2009, 07:07 AM
I don't have any wheel hop issues with them installed, but I never had them before either... maybe I don't have the power everyones else has hahaha

Yeah RIIIIIIGHT! :spank:
99-LS1-SS
03-10-2009, 09:20 AM
I don't have any wheel hop issues with them installed, but I never had them before either... maybe I don't have the power everyones else has hahaha

I'm not sure but, I think you might be mocking me....:sneak:
99-LS1-SS
03-10-2009, 10:34 AM
Well, I've gone ahead and ordered the trailing arms.
Ktlplxm
03-10-2009, 10:36 AM
Me?? Mock?? Never !! haha No seriously, I've never had wheel hop in this car since day one... but that was funny


I'm not sure but, I think you might be mocking me....:sneak:
99-LS1-SS
03-10-2009, 10:42 AM
Mine has wheel hopped like crazy from the first test drive. Every time I spin the tires for any reason it gradually progresses into a hop fest and not the beer kind.
-Ray-
03-10-2009, 01:18 PM
My parts are here! :)