View Full Version : Taking flip key apart
Debo2000
10-06-2012, 12:23 PM
So after reading over about 30 pages on here I was unable to find anyone who has taken the flip key apart. All I did find was a thread talking about taking the pontiac symbol off but looking at my old key it will not work. I bought a blank key from Pace and need to put my old key in the flip part and DO NOT want to break it as I have been using my spare and the transmitter does not work so it is a pain in the ass especially when I unlock it and the alarm goes off everytime. Does anyone have any suggestions because to get the key cut it cost 85 damn dollars which is absurd. I cant stand people ass raping just because they can. Thanks for anyhelp or suggestions fellas.
Crazy8
10-06-2012, 02:16 PM
I need to do this too. Subscribing.
GXPaycheck
10-06-2012, 02:22 PM
There is a thread on one of the boards about this. Did you search for key fob? It might be under one of Greg@pace's threads for fob parts.
Here's one:
http://www.g8board.com/forums/showthread.php?t=42667&highlight=key+fob
and another:
http://forum.grrrr8.net/showthread.php?t=26864&highlight=key+fob
Debo2000
10-06-2012, 07:16 PM
Thanks for the reply and links but I need to change the actual flip key and nothing else.
Crazy Paul
10-07-2012, 12:39 AM
Gently remove the Pontiac logo disc.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/Px1010071.jpg
Underneath you'll find a screw. Remove the screw.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180217.jpg
Use a small flat blade screwdriver the lift the outer flap of the Tab B.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180216.jpg
The small coil spring will assist in seperating the 2 halves of the clamshell.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180214.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180213.jpg
Now you can remove the key blade & carry out your key swap.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180212.jpg
For Re-Assembly the small tang on one end of the coil spring must sit in slot.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180211.jpg
You must align the hook of Tab A into the recess for the hook....the 2 halves of the clamshell will swing together around this hook.
When everything is aligned correctly then you can snap shut Tab B.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180215.jpg
Tighten up the screw and affix the Pontiac logo back over the screw.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180218.jpg
Very small tools required.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/P1180210.jpg
WhiteDeathLSX
10-07-2012, 05:44 AM
CP... is the key housing and all its internals available from GM? I need to replace my GXP key housing.
Sent from my DROID RAZR using Tapatalk 2
Debo2000
10-07-2012, 05:51 AM
CP,
You are the shit! Thanks for taking the time for the write up. I'm sure it will help more than just me.
Debo2000
10-07-2012, 06:14 AM
Greg @ Pace has the housing that comes with everything you see in CP post above including a blank key. I want to say its 25.88.
Crazy8
10-07-2012, 06:28 AM
Awesome! Thanks.
Debo2000
10-07-2012, 07:16 AM
CP,
I hate to ask questions after such a detailed post but no matter what I do I now have a flip closed key. I have the tang in right as well as the other side has a slot for spring. Any idea?
Debo2000
10-07-2012, 07:34 AM
Got it! Didn't realize u have to wind spring. Should have realized. Thanks again Mr Paul!
Crazy Paul
10-07-2012, 08:05 AM
CP... is the key housing and all its internals available from GM? I need to replace my GXP key housing.
Yes the Pontiac Flip Key assembly is cheap enough as Part No 92204549. I can imagine somebody wanting a replacement (approx 15mm diameter) Pontiac logo disc but don't know if this is available.
What you see below are the available parts I know of:
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/Pontiac-Flip-Key.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/ve20flipkey.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/chevkey.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/HSV-VE-Flipkey.jpg
WhiteDeathLSX
10-07-2012, 08:12 AM
Thanks! My buttons work fine... but the key "flip" no longer functions - I think the spring mechanism busted. Now my key is flaccid... :(
I do have a spare GT key housing. Is it the same as the GXP (sans remote start)?
Sent from my DROID RAZR using Tapatalk 2
Crazy Paul
10-07-2012, 08:29 AM
I do have a spare GT key housing. Is it the same as the GXP (sans remote start)?
Yes.....one part number only for all G8 flip key heads with blank uncut key. 92204549 as per picture above.
Posidon42
10-07-2012, 08:52 AM
Can we get the one with the Holden logo?
Crazy Paul
10-07-2012, 08:57 AM
Can we get the one with the Holden logo?
Yes. Everything pictured is available. Send me a PM if you want details on the Holden flip key.
TNTLS2
10-08-2012, 02:56 PM
I need to buy a whole new flip key.. when i bought my car I only got one key and it was the no flip one. I hate it.
Posidon42
10-09-2012, 08:55 PM
Yes. Everything pictured is available. Send me a PM if you want details on the Holden flip key.
You are going to be the death of me... First floormats, then this. What's next, an affordable VE conversion?
Posidon42
10-09-2012, 08:56 PM
Is it possible to switch out my key with the blank in this one? I don't know where to get these keys cut around here.
MongosG8
10-10-2012, 07:40 AM
Needing to rebuild mine.. noticed the key doesn't lock that much and spring is a little payed out. Plus the rubber piece is cracking from pushing the buttons the last 3 years.
Thanks for the info Paul! It will be helpful!
Crazy Paul
10-10-2012, 07:55 AM
Plus the rubber piece is cracking from pushing the buttons the last 3 years.
Replacement rubber keypads are available and only about $4ea.
92245050 - G8 Replacement Fob Buttons Only
92245049 - G8 GXP Replacement Fob Buttons Only (has no pad/key for a remote start button).
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/92245050-1_zps02105fbb.jpg (http://s2.photobucket.com/user/PerthPurplePenguin/media/car%20parts/Keys/92245050-1_zps02105fbb.jpg.html)
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Keys/92245049_zps35f682c8.jpg (http://s2.photobucket.com/user/PerthPurplePenguin/media/car%20parts/Keys/92245049_zps35f682c8.jpg.html)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.