Bohnman's Electronics Front Bumper Splitter Group buy II

[Jeff@Bohnman's Electronics]

Due to the recent interest in the G8 front bumper splitter from the COTM on the other board we would like to have another front splitter Group Buy.

Bohnman's Electronics will offer $25 off our regular price of $165 shipped to 10 people who want to participate in this group buy. Money will be due 2 days after 10 people are reached. Money will need to be paid via paypal. So they will be $140 Shipped

Thank you For all the support that we have received from the Grrrr8 community

Splitters will be shipped approximatly 1.5 weeks after the Group buy payments are recieved.

http://i235.photobucket.com/albums/ee201/bohnman/g8%20splitter/HPIM0707.jpg

http://i235.photobucket.com/albums/ee201/bohnman/g8%20splitter/HPIM0659.jpg

http://i235.photobucket.com/albums/ee201/bohnman/g8%20splitter/HPIM0692.jpg

http://i235.photobucket.com/albums/ee201/bohnman/g8%20splitter/HPIM0691.jpg

http://i235.photobucket.com/albums/ee201/bohnman/g8%20splitter/DSC00683.jpg

People can also follow others installed pictures here: http://forum.grrrr8.net/showthread.php?t=29859

1. G8Holland ***paid***
2. Moonpie ***paid***
3. Carey ***paid***
4. Weldon ***paid***
5. G8GS ***paid***
6. Semperfire ***paid***
7. EcoBrick Bob ***paid***
8. incon3037r ***paid***
9. AVIDMOTION ***Paid***
10. PhillyG ***Paid***

PayPal payment adress is bohnman@att.net

[G8Holland]

I'm in for one of these. Perfect timing too, have been looking at this for a while now.

[MoonPie]

In, I need a new one and will get it installed correctly instead of just flubber fucking the install.

Since I'm dropping her an inch it'll be perfect. But can you give me detailed instructions for the GXP? Thanks, brosef

[carey]

In for one, ready to paypal when needed.

[fixem2]

Count me in

[G8GS]

I'll take one too.

[Jeff@Bohnman's Electronics]

Sweet 5 people down only 5 to go :)

Thanks Guys

[Joeygr8gt]

I love this splitter. Iv had in my car for over 6 months now. I was one of the first to buy before the group buys were started. adds a lower look the the car and a more aggressive front end. favorite appearance mod on the car
15980

[Jeff@Bohnman's Electronics]

Wow what an awesome picture

[Jeff@Bohnman's Electronics]

4 spots left

[carey]

I love this splitter. Iv had in my car for over 6 months now. I was one of the first to buy before the group buys were started. adds a lower look the the car and a more aggressive front end. favorite appearance mod on the car
15980

Your car looks so good! I cant wait to get my splitter in and put it on my car!

[Jeff@Bohnman's Electronics]

A few spots left.

[hflores3]

I also am a customer. Quality of the product is first rate.

Jeff, can you post/share install instructions? It might help others (process related).......it darn sure would help me (I lost mine)

[Jeff@Bohnman's Electronics]

Sure I'm at a car show now but when I get home I'll post it up I can send to you by email of you want just send me an email and I'll see if I can send it from my phone.


Sent from my iPhone using Tapatalk

[Jeff@Bohnman's Electronics]

3 spots left


Sent from my iPhone using Tapatalk

[Jeff@Bohnman's Electronics]

The Instructions are attached.

the instructions don't mention trimming the center supports this will need to be done because we've found some differences int he front bumper covers. (cracks etc)

[incon3037r]

add me

[EcoBrick Bob]

PIECE OF CAKE*

*If I can get this on with no problems... I'm going to have a piece of cake....

[MoonPie]

Here's the underneath of the front bumper cover from one end of the rubber GXP insert to the other, and where I had it attached incorrectly further back which ripped away. I'm thinking I'm still good on installing this piece.

http://i1121.photobucket.com/albums/l511/SigMundr/1cdbbb4e.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/1429a679.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/d2ca3cf9.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/23a6d62c.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/b5519d20.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/9975ea99.jpg

[Jeff@Bohnman's Electronics]

Looks like you should still be able to lint it maybe just move the bolt over if it's over the bad spot

[MoonPie]

Those four bolts are in front of the bad spots which if I remember correctly weren't on the original directions. Being a GXP I know you said I needed something extra or different.

[Jeff@Bohnman's Electronics]

The only difference between the GXP and GT is the front spacers need to be made a little shorter

[AVIDMOTION]

Count me in!

[PhillyG*]

One more here, I'm in.

[incon3037r]

Does the GXP spacers come shortened already?

[AVIDMOTION]

Should be 10 now-we all set! Who do I make the check out to!

[Jeff@Bohnman's Electronics]

10 people :)

Group buy is over

Please make PayPal payments to bohnman@att.net

We should have the splitters ready for shipment in 1.5 weeks

[Jeff@Bohnman's Electronics]

Does the GXP spacers come shortened already?

No they come a little long so you can trim them to fit your bumper. We found that some bumper require a little longer spacer than others. The spacer is made from plastic so it can easily be trimmed with a hand file or bench grinder. You could even use a sanding disk and a drill or even concrete if you were in a pinch.

[AVIDMOTION]

Money sent via paypal please check and confirm thanks(Joemastro6@gmail.com)
AVIDMOTION PAID PAYPAL

[Jeff@Bohnman's Electronics]

Can everybody that pays please list your username with the payment so I can keep things together.

Thanks,
Jeff

[MoonPie]

Paypaled

[G8GS]

Paypal sent.

[EcoBrick Bob]

I paid as soon as I got your invoice via paypal.

Rob

[Jeff@Bohnman's Electronics]

Looks like 2 people left to pay

[MoonPie]

So I'm gonna need to trim the braces. Have any idea as to the approximate length for an optimal fit? Thanks.

[TheKhriz]

Totally changed the look of the car. It's a must for any G8.

[Jeff@Bohnman's Electronics]

So I'm gonna need to trim the braces. Have any idea as to the approximate length for an optimal fit? Thanks.

Remove approximatly 3/16" from the spacers as you recieve them double that shoudl put them pretty close.

[Jeff@Bohnman's Electronics]

We had one person back out for personal reasons so there is still one avalable for the group buy price.

Also if anybody knows incon3037r can they please let him/her know that payment is past due.

Thanks for the support guys.

[MoonPie]

Remove approximatly 3/16" from the spacers as you recieve them double that shoudl put them pretty close.

In the hills where I'm at I believe you mean just cut them in half?

[MoonPie]

installing 1" drop eibach springs on Satuday. When I get this thing installed it'll be the most realest thing I know inside the mirror bro.

[Jeff@Bohnman's Electronics]

Well at least this will protect your bumpe from damage since your car will be lower :)

[carey]

Come on people! I want my damn splitter lol


Sent from deez nuts for you

[Jeff@Bohnman's Electronics]

I got a message from incon3037r yesterday he said he would be paying by the end of the week. but ther eis still one open spot.... Tell your friends :)

[incon3037r]

Sorry for holding up the group buy guys. As Jeff said, I will be making my payment before C.O.B. Friday. I didn't think these would go so fast and chose to spend my money on some other parts for my G8.

[Savage-wp]

Will this fit on a Chevrolet Lumina SS. It is basically the same car as the G8, with slight cosmetic difference. The front bumper is slightly different.

[incon3037r]

PayPal sent

[shudogg]

If there is one spot left I'll take it...

[Jeff@Bohnman's Electronics]

All spots are filled thanks for the interest everybody

[SBM-09]

Shucks :/ Always late to the party lol... Are these available outside the group buy or?...

[Jeff@Bohnman's Electronics]

Yes regular price is $165. Let me know if you want one :)

[carey]

Eta??

[AVIDMOTION]

I think we are still at least one short?

[incon3037r]

I received a tracking number today

[Jeff@Bohnman's Electronics]

All the splitters will Ship Monday we spent about 5 hours last night wrapping and getting the splitters ready for shipment when we finished UPS was closed.

[G8Holland]

Thanks for the update. Looking forward to getting this installed next week.

[Jeff@Bohnman's Electronics]

Holland Mi should be a quick trip I'm thinking

[PhillyG*]

sounds good!

[carey]

Received mine today! Thanks a lot. Where are the installation instructions at online?


Sent from deez nuts for you

[AVIDMOTION]

"Received mine today! Thanks a lot. Where are the installation instructions at online? ".....DITTO

[Jeff@Bohnman's Electronics]

The Instructions are attached.

the instructions don't mention trimming the center supports this will need to be done because we've found some differences int he front bumper covers. (cracks etc)

Post 16 in this thread has the install instructions.

Glad people are getting there's how do they look? We tried a new packaging method takes us 1/2 the time that it did before with card board. Cost a little more but we thought the time out weighed the cost.

[carey]

Post 16 in this thread has the install instructions.

Glad people are getting there's how do they look? We tried a new packaging method takes us 1/2 the time that it did before with card board. Cost a little more but we thought the time out weighed the cost.

Mine had no damage at all. Some of the plastic had torn in the middle but the bubble wrap was still in place and protected it. Hopefully can install it tonight at work. Thanks again


Sent from deez nuts for you

[G8Holland]

It showed up with no damage or even ripped plastic. The plan is to get it installed this weekend. Are the bolts in the kit stainless?

[Jeff@Bohnman's Electronics]

The bolts are zinc plated.

Good to hear that the packaging worked.

Post up some installed pictures :)


Sent from my iPhone using Tapatalk

[MoonPie]

I have a chip on the drivers side nose, noticeable when you look for it. Installed today with ease, 15-20 minutes lining up and making it even on both sides, then about ten minutes installing the nuts and bolts with this puppy:
http://i1121.photobucket.com/albums/l511/SigMundr/22B4D9DA-7A45-43D5-93BB-C42426E7521B-1967-000001B41502D7F4.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/DB88391B-3DE0-49B8-A5E9-18697ED6F9D7-1967-000001B40E12AABE.jpg

What's funny is the only reason I hopped on it today was I just got the car back from the body shop. I had originally asked them to install it. They said no problem. Halfway through the week they told me they weren't comfortable installing it. I was like ok, I guess there are pussies everywhere. Doing a little recon for the planned install tomorrow and notice the two middle 7 mm bolts are missing along with the clips so I went ahead and installed it with relative ease. Looks like they attempted to install it, got sand in their pussies and bailed without even re-installing the clips and 7 mm bolts which is easier than wanking with cocoa butter. I've removed and re-installed them at least three times.

[Jeff@Bohnman's Electronics]

Ratcheting wrench makes this much easier. Where are the installed pictures :)

[MoonPie]

Ratcheting wrench makes this much easier. Where are the installed pictures :)

Here you go:
http://i1121.photobucket.com/albums/l511/SigMundr/84BCD7A9-6D46-480F-A89D-B02775E2A455-2159-000001E884F81219.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/88A8FB10-2BAA-4F47-83E1-652C0ACB765C-2159-000001E88D8DCF03.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/2A68DC55-85BE-43BC-83F7-FA4EF863A366-2159-000001E892E6E895.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/87B821AC-C9B8-47A4-A179-64461B2560A5-2159-000001E8984004E7.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/224A1801-C3E8-4D1E-B91F-88A6CDCBC9C7-2159-000001E89D123A43.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/963218CD-F749-4F07-AC81-7F16BCA6FEDA-2159-000001E8A24BB29C.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/F339B6BE-E22E-4E81-81B0-E4BBBC2DF977-2159-000001E8A7E0B948.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/EE3F584D-4524-45A2-B464-873124FBAB5B-2159-000001E8AD501467.jpg
http://i1121.photobucket.com/albums/l511/SigMundr/6DAC8BE5-AEBD-40B9-B202-8B3A6EDFFD99-2159-000001E8B20804D6.jpg

Didn't have to shorten the plastic pieces at all and it has survived a quick acceleration to 100 mph, Tuesday we'll see how it survives 150 plus MPH.

[hflores3]

I've got mine up on jacks "this very moment" doing the splitter install. Let's see how this goes.

[Jeff@Bohnman's Electronics]

Looks great moonpie

[MoonPie]

Looks great moonpie

Thanks. Really an easy install once it's lined up.

[Jeff@Bohnman's Electronics]

Looking like a shipment is in the works to Australia :) kinda cool


Sent from my iPhone using Tapatalk

[morpheousssv]

could be more than one too

[Jeff@Bohnman's Electronics]

Best news of the week :)


Sent from my iPhone using Tapatalk