ZL1 Pump Kit

[Greg@PacePerformance]

Edit : New kit available See below.

You can install a ZL1 fuel pump into the G8 for added fuel volume.

We offer a ZL1 kit that includes:
ZL1 fuel pump module
Jet pump crossover tube
Lower PSI fuel pressure regulator
Secondary fuel level sender and connector.
Current price is going to be $360.95 plus shipping.

You will then need to contact Carl @ Vaporworx for a fuel pump power connector and ZL1 fuel pressure regulator adapter. (around $40.00 for the parts)

This method will require dropping the fuel tank to install the secondary fuel sender and new crossover tube.

This kit is not on our site yet so PM or Email me if you are interested.
-Greg

EDIT
------------------------------------------------------------------------------------------------------------------------------------------------------------------
EDIT
Now available is a complete ZL1/1LE fuel pump upgrade kit.
GMP-19260557 (http://paceperformance.com/i-14286929-gmp-19260557-g8-zl1-1le-high-volume-fuel-pump-conversion-kit.html)
This kit includes a brand new ZL1 fuel pump module, fuel level sender, 58 psi regulator, and the Vaporworx adapter kit (pigtail connector, regulator adapter, and crossover tube adapter)

Or if you already have the pump module and regulator from we also over the Vaporworx kit separate under part number G8ZL1MKIT (http://paceperformance.com/i-14286937-g8zl1mkit-g8-zl1-mechanical-kit.html)
http://paceperformance.com/images/F80371941.jpg

[Devilish34]

not that I'd be buying one but how much can it support

[Greg@PacePerformance]

Shane is using this pump for over 600 with his BAP running.
I would say 500 to 550 maybe.

[Kermit]

What is the difference between this and the CTS-v kit that your putting in your GXP?

[Daniel Linnett]

greg can you not cut access on both sides instead of dropping the tank? I already have my solution just wondering for others out there who may go the zl1 route

[Greg@PacePerformance]

I don't see why you couldn't cut two access holes instead of dropping the tank.

The difference between this one and the and the CTS-V version that is in my GXP and in a few other cars very soon is this is a single 255lph pump and the V pump is a dual 190lph pump (I think) that must be powered by a PWM controller.

The V kit is a better all around option than the ZL1 pump but the cost is a little over double that of this system.

[hflores3]

You can install a ZL1 fuel pump into the G8 for added fuel volume.

We offer a ZL1 kit that includes:
ZL1 fuel pump module
Jet pump crossover tube
Lower PSI fuel pressure regulator
Secondary fuel level sender and connector.
Current price is going to be $360.95 plus shipping.

You will then need to contact Carl @ Vaporworx for a fuel pump power connector and ZL1 fuel pressure regulator adapter. (around $40.00 for the parts)

This method will require dropping the fuel tank to install the secondary fuel sender and new crossover tube.

This kit is not on our site yet so PM or Email me if you are interested.
-Greg

Greg .....did I get "everthing" i need from for you this install? (minus the pump itself)..............?

[CHenry]

What is the purpose of replacing the level sender on the secondary pump? Is it incompatible with the sender that comes on the zl1 pump? I assume the G8 secondary level sender will not play nice with the ZL1 primary level sender?

[Greg@PacePerformance]

The reason was so there was not any cutting needed to the stock crossover tube. I'm in talks with Carl to sell an adapter piece to mate the G8 crossover tube to the ZL1 pump. This will eliminate the need to "create" an adapter like everyone has done up until now.

[CHenry]

Oh. Ok thanks for clearing that up. So you can just install the zl1 pump and wiring if you can adapt the crossover tube to the smaller zl1 nipple.

[CHenry]

Is there an eta on the adapter? I have the pump already but wont be needing to install for 2 months. I wanted to get the old part number that had the level sender on it and there werent many left.

[Greg@PacePerformance]

Oh. Ok thanks for clearing that up. So you can just install the zl1 pump and wiring if you can adapt the crossover tube to the smaller zl1 nipple.

Yes for the most part.

I should have the complete kit from Vaporworx next week sometime.
It will include the adapter, connector pigtail, and regulator adapter. We have not set up a price yet.

Do you have the Camaro level sender? You will need that as well and a new regulator.

[Greg@PacePerformance]

Is there an eta on the adapter? I have the pump already but wont be needing to install for 2 months. I wanted to get the old part number that had the level sender on it and there werent many left.

I should have the adapter kits in stock next week.
Here is the link to it on our site. Price will be $72.95
G8ZL1MKIT - $72.95 (http://paceperformance.com/i-14286937-g8zl1mkit-g8-zl1-mechanical-kit.html)

Complete ZL1 pump conversion kit (http://paceperformance.com/i-14286929-gmp-19260557-g8-zl1-1le-high-volume-fuel-pump-conversion-kit.html)
Then if you wanted to get real crazy you could drop the tank and put the ZL1/1LE pump pickups on the secondary level sender so you have constant fuel on a road course.

[CHenry]

Great! I will definitely order one!

I purchased pn 19258436 Module/ w level sensor from work already.

ed. I dont have the camaro regulator though. Is it included in the install kit? If not what is the price from you?

[Greg@PacePerformance]

The required regulator is not included but I can sell one separate. $49.98 and we keep it in stock.

[CHenry]

great thanks!

[Greg@PacePerformance]

I have updated the 1st post.
We now have the kits in stock and up on our site.

[-Ray-]

The required regulator is not included but I can sell one separate. $49.98 and we keep it in stock.

Greg, Send me the regulator. Please. Or, put the part number in this thread.

Thanks,

Ray

[Greg@PacePerformance]

I'll do both Ray. One is on the way to you, and the part number is 89060416

[-Ray-]

I'll do both Ray. One is on the way to you, and the part number is 89060416

Thanks buddy.