Replacing axle seal in camaro diff

[G8V8]

One of the seals in my 3.27 Camaro diff is leaking at the axle. I have a new seal inbound from Greg at Pace. Any advice or trickes of the trade would be appreciated.

[Rawyzf]

Wish I could help here, but I got nothing. Good Luck!

Are the Axel Seals the little rings that go on the diff before you put the axel back in? If so, I replaced those when we did the swap.

[G8V8]

The seals are the rubber lipped rings that press into the large opening in the diff where the axles slide in.

[Rawyzf]

The seals are the rubber lipped rings that press into the large opening in the diff where the axles slide in.

Ok, that is what I tried to explain in my last post, you said it much better :)

We replaced those when we did the swap. Did you replace yours then too, or reuse the ones you had?

[G8V8]

We just kept the ones that were in the diff already. We did 2 diffs that day, both used. so far 3 or the 4 seals seem to be working just fine. Just my bad luck I guess.