G8 Grrrr8 parts list

[-Ray-]

Yep, mines original. It's been removed twice now for painting.

[Greg@PacePerformance]

Ray,
#5 is only available with #2 and also includes #4 (bolts)
LH - 92159883
RH - 92159884
$9.65 each. Not bad if you ask me.

[Crazy Paul]

Ray,
#5 is only available with #2 and also includes #4 (bolts)


OK #5 is available here in Oz (over 1200 in stock about $1ea) and maybe there also.
Part No 92138829

[-Ray-]

Pack me up a couple Paul. What ever it takes to be worth your while.

[Crazy Paul]

Pack me up a couple Paul. What ever it takes to be worth your while.

OK done.
I've ordered you 4 in case the problem happens again.
I'll be in contact with shipping details for you later.

[Greg@PacePerformance]

Thanks for the number Paul (92138829) it is available here. I will put a note in our parts catalog for next time.
Available in the PPV catalog.
GM dealer cost is $2.17 and retail is $3.88 each. Interesting. :)

[Crazy Paul]

The bolt #4 I've got written down as 11519376 but there was some problem with that number showing up on the stock computer, see if it shows there Greg.

[Greg@PacePerformance]

The bolt in the G8 catalog is 11561674 the bolt in the PPV catalog is 11519376.
I put 11519376 in to the part locator and it calls it a headlamp screw. Could be right or wrong.

[TheWhiteKnight]

I'm looking to replace the drivers side wiper arm (not the blade), can you provide me with the part number(s) to do so?

[Greg@PacePerformance]

The DS arm is 92191436 - $12.42
The PS arm is 92191437 - $13.66

[TheWhiteKnight]

Thanks Greg!!! Where are you getting your prices from? I checked PacePerformance.com but it says no parts are found for that part number.

[Greg@PacePerformance]

:) My parts computer with the Grrrr8.net discount ;)
You want to order them just shoot me a PM since they are not in our online database. (not a popular item)

[Mick3]

Does anyone know the correct part number for the piece that connects the rear diffuser to the trunk base? I ordered part #92158384 and unfortunately it is the wrong part (I received a metal braket from GM). As you can see from the picture in the post referenced below (top of the picture), the part is a plastic piece that extends from under the diffuser and connects to the trunk base by three tongues with screws. Mine is cracked in all three places so my diffuser is flapping in the wind. I would definitely need this part (or something custom) before installing a GXP rear diffuser. Please see post #239 in the link below for the picture:

http://forum.grrrr8.net/showthread.p...856#post334856

Thank you in advance!

[Crazy Paul]

Does anyone know the correct part number for the piece that connects the rear diffuser to the trunk base? I ordered part #92158384 and unfortunately it is the wrong part (I received a metal braket from GM). Mine is cracked in all three places so my diffuser is flapping in the wind.

The Parts Drawings are crap. We tried our best knowing full well which piece you needed.
Take the broken piece off and see if there are any part numbers on it.

[Mick3]

CP: Thanks for your help. Hopefully, I can make it down to the shop this weekend to see the work in progress. If so, I will take the part off, find the number, and post the number here for future reference. Thanks again for everything!

[Crazy Paul]

If so, I will take the part off, find the number, and post the number here for future reference.

Not so fast.
The number on the piece may not necessarily be the Part Number.
Just give me any 8 digit numbers starting with 9 that are on the piece and I'll check it out.
Once we decipher and nail the number then we'll post it up.

[Greg@PacePerformance]

The part he needs is the rear fascia I think. I went out and looked and mine is painted red (wifes car)
http://i295.photobucket.com/albums/mm132/charlesvanwormer/DSC04853.jpg
As you see here in charlies picture the fascia wraps down under the car and mounts with 3 push in fasteners.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/Exhaust/G820A-B.jpg
The ears on this car are black so it looks like a bracket.

[NC GXP]

Thanks for PN for grilles. Are these still available from GM? How much should I plan on spending for them?
Conrad

[Greg@PacePerformance]

Sure that are still available.
92201780 and 92201781 are $86.70 each

[MongosG8]

Going out to Paul or Greg.

There is a couple of members including myself looking for the rubber grommets for the exhaust. The ones the exhaust hangs on.
Are these available and is there a part# for them? Not too sure if they are all the same.

Thanks in advance!

[Crazy Paul]

GM Part 22674119
Genuine GM INSULATOR
Item 19 & Item 6 below....both the same Part Number.
(Will be cheapest sourcing these from Greg)


http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/G8V8exhaust.jpg

[MongosG8]

Thanks for the information Paul Appreciate it!

[Mick3]

I Need the part number for the lower radiator hose extension that connects to the radiator by a quick connect. I'm replacing my radiator and the lower hose is too short and the lower connection point has a quick connect or speed connect type fitting instead of the usual hose fitting like the upper hose. I have the 2008 G8GT. Also, I need the part number for the locking clips for the heater hoses. Thank you in advance, Michael

[G8GTKID]

Wow this is pretty sweet. Just noticed this thread! Nice job CP and Ray!

[Mick3]

http://http://s1143.photobucket.com/albums/n634/man2004/?action=view&current=RadiatorhoseQuickconnect.jpg

Here is a pic of the quick connect

[Mick3]

http://<a href="http://s1143.photobucket.com/albums/n634/man2004/?action=view&amp;current=RadiatorhoseQuickconnect.jpg" target="_blank"><img src="http://i1143.photobucket.com/albums/n634/man2004/RadiatorhoseQuickconnect.jpg" border="0" alt="Photobucket"></a>

[Mick3]

Let's try links instead...

http://cdn1.autopartsnetwork.com/images/catalog/wp/full/W01331627850HUT.JPG

http://www.oembimmerparts.com/i/2009COOLING/BMWUPPERHOSEALT.JPG

[Crazy Paul]

I Need the part number for the lower radiator hose extension that connects to the radiator by a quick connect.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/L76rad.jpg

Item1---Radiator Assembly 92216759, new number 92234040
Item2---Radiator Pipe Outlet Assembly 92237786
Item3---Clip 92191925
Item4---Drain Assembly 92191922
Item11---Radiator Cap 92205634



Also, I need the part number for the locking clips for the heater hoses. Thank you in advance, Michael

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/174824228.png

Items 3,4,&5---All 92138288, Spring band clamp 22-26mm
Item 6 --- 92138367 , Spring band clamp 24-28mm

[skinsfangreg]

Do you have part numbers for the jack kit? Any help is appreciated.

[Crazy Paul]

Do you have part numbers for the jack kit? Any help is appreciated.

Individual parts to make a kit. See Post #151 of this very thread.
http://forum.grrrr8.net/showthread.php?t=2637&p=296975&viewfull=1#post296975

Complete Jack Kit. PAC-G8SPARE
http://paceperformance.com/i-5146350-pac-g8spare-g8-gt-spare-tire-tool-kit.html

[Kermit]

Hey Guys,
I'm looking for the GXP upper radiator hose. I have a GT but since I'm installing the Maggie TVS2300, I need to use the GXP water pump and the goose neck is on the drivers side instead of the passenger side. Already have the pump, just need the shorter upper hose. Thanks for your help.

[BlackGT5]

Hey Guys,
I'm looking for the GXP upper radiator hose. I have a GT but since I'm installing the Maggie TVS2300, I need to use the GXP water pump and the goose neck is on the drivers side instead of the passenger side. Already have the pump, just need the shorter upper hose. Thanks for your help.

IIRC, the 09.5 GT hoses are the same as the GXP. Part numbers printed on the upper hose are :

92225857 (Hose)
92199505 (Assy)

I don't know why there are 2 numbers listed as the hose is the assembly....unless I am missing something. Anyway, I could not find any info on either number. Maybe Greg or CP can shed some light.

[Kermit]

Thanks, I'll figure it out once I call the dealership. :)

[Crazy Paul]

IIRC, the 09.5 GT hoses are the same as the GXP.

Yes it's a VIN break point and not V8 engine type which determines which hose.
Longer top hose , USA passenger side waterpump connection, Most G8-GT's, up to 2009ish.......92157816.
Shorter top hose, USA drivers side waterpump connection, 2009.5+..........92215927

[Kermit]

Cool, thanks CP!!!

[RichGG8]

Hi guys was wondering what the part # for the two caps on the back of the headlight assembly???

[Crazy Paul]

92193037 Cover Headlamp Bulb Access (Low Beam)
92193038 Cover Headlamp Bulb Access (High Beam)

[silver6.0L]

Hi guys was wondering what the part # for the two caps on the back of the headlight assembly???



When I ordered part number "92193037 Cover Headlamp Bulb Access (Low Beam)" it was the wrong cap. They tried twice thinking it was packaged wrong. So the dealer ordered part number "92193038 Cover Headlamp Bulb Access (High Beam)" and it fit the low beam. I just looked at a GM parts catalog and they are still showing the smaller cap in the picture. If GM got their shit together the may have fixed the part number with the correct part but not the picture. Save yourself the time and order the high beam caps to avoid having to reorder them.

[RichGG8]

Thanks for the help guys I really appreciate it...

[astynx]

I'm thinking about putting leds in dome/maplights, sunroof-equipped. I really don't need parts numbers, but is it possible to see diagram of sunroof-equipped dome/maplight 'assembly'? Thanks for this GRRRR Parts List thread.

[Crazy Paul]

I'm thinking about putting leds in dome/maplights, sunroof-equipped. I really don't need parts numbers, but is it possible to see diagram of sunroof-equipped dome/maplight 'assembly'? Thanks for this GRRRR Parts List thread.

I've been researching this for someone else and lets just say the GM drawings in this area are diabolical.
They only show 1 generic drawing for all options and it does not give any detail or sub-assembly part numbers.
I can give you some photos, maybe something there can help somebody.
BRB.

[Crazy Paul]

Maplight equipped roof console.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/OverheadconsoleG8wanted.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/14072008257.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/14072008256.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/14072008258.jpg

[Crazy Paul]

Plain (no maplight equipped) roof console.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/RoofLight.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/DSC09663.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/DSC09665.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/DSC09664.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/100_2962.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/ShowingHingeHooks.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/roof%20console/ShowingBackOfUnit.jpg

[STL_G8GT]

You need to use a small pick tool to release the sunroof control panel, you'll see small gaps to insert the tool. Once that piece is dangling, you need to remove the screws you can see that go into the roof bracket. Next the unit will pop out, but be CAREFUL as you do it, I think the front releases first then it drops forward and down/out. Be careful as there are absolutely breakable plastic pieces in there!

Test the lights in the sockets before you reassemble!!!


I'm thinking about putting leds in dome/maplights, sunroof-equipped. I really don't need parts numbers, but is it possible to see diagram of sunroof-equipped dome/maplight 'assembly'? Thanks for this GRRRR Parts List thread.

[astynx]

Crazy Paul , Thanks for photos, your an asset to G8 owners. STLG_GT thanks for your info also.

[z51l9889]

Thanks for all the hard work maintaining the parts list.

I need a part number for the front caliper bridge to knuckle bolt for a GT. My understanding is that these bolts are torque to yield. Is this correct?

[Crazy Paul]

Front Caliper to Knuckle Bolt = 92172963 (seen as Item 5 below)

Yes TTY (single use only).
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/front-brakes.jpg

[z51l9889]

Thank you!

[skinsfangreg]

Do you have the part number for the 2009.5 rear seat cup holder? Thanks in advance

[Eidolon]

Drat! Tore a tie rod boot. :( I need the part number for the passenger-side tie rod.

[Greg@PacePerformance]

Right Hand Tie rod end is 92198274 and runs $23.78

[Crazy Paul]

Right Hand Tie rod end is 92198274 and runs $23.78
WOW thats cheap....seriously.

[Eidolon]

Right Hand Tie rod end is 92198274 and runs $23.78

WOW thats cheap....seriously.
Got it ordered! Thanks!

[Monty]

FRONT SUSPENSION, LCA PARTS LISTING.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/VE%20under/R1010023_091.jpg

Item 3 -- Bolt , single use only. 92139182
Item 6 -- Captive Nut, Not available as a seperate replaceable item.
Item 9 -- Bolt , single use only. 92139183
Items 10,14,& 15 -- All the same nut. Single Use Only. Has several part numbers [92139120 or GM #11514598], Thread 12 x 1.75, Hex Form, Nylon Insert.
Item 16 -- Washer 92199070
Item 17 -- Adjuster Kit 92218339
Item 18 -- Bracket 92199656


Note --New LCA's (items 5 & 7) do not come with new single use only nuts (14 & 15) from the factory.

Paul I just recieved a LCA kit it came with 4 bolts and 4 nuts.

2 bolts #92139036
2 bolts #92139035
4 nuts #92139120

In the picture #6 the Captive Nut are they reusable? Because you say that "Not available as a seperate replaceable item".

[Crazy Paul]

Paul I just recieved a LCA kit it came with 4 bolts and 4 nuts. The 4 arm kit with fasteners included, came about after I made that post. If anyone now buys individual arms (like everyone used to have to) they still won't have fasteners included.


2 bolts #92139036 Part No looks correct for application.


2 bolts #92139035 Part No looks correct for application.


4 nuts #92139120 Part No looks correct for application.


In the picture #6 the Captive Nut are they reusable? Because you say that "Not available as a seperate replaceable item". Yes, re-usable.....they have to be as they're most likely welded or swaged to the car frame.

[Monty]

Thanks Paul I just wanted to make sure before I rip things apart.

[Bhuge]

Are these the correct numbers for the axle retaining nut and washer?
92138989 and 92139022
Also what are the part numbers for the rear axle assemblies for the GT?

[Greg@PacePerformance]

Are these the correct numbers for the axle retaining nut and washer?
92138989 and 92139022
Also what are the part numbers for the rear axle assemblies for the GT?

Those are the correct numbers if you VIN is lower than 9L191080

The part numbers for the axles
Left - 92216819
Right - 92216817

[Bhuge]

Thanks.

[cynic783]

how do I look at the list? I can't see it and can't find anything to click on that will show it.

thx

[Eidolon]

how do I look at the list? I can't see it and can't find anything to click on that will show it.
You can't actually look at it, as it's not posted, for a few reasons that are listed in the first post. But if you know the part you need, describe it as best you can here in this thread and Greg or Crazy Paul will reply with the part number for it.

[black09gt]

I need 2 new upper radiator support brackets. I removed my stock ones for the Ramjet install and now I can't find them.

[Crazy Paul]

I need 2 new upper radiator support brackets.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/451859751.jpg
1= 92191953
2= 92191952
3= 92191926
4= 11516372
5= 92139101

[black09gt]

Number 2 it is. Thanks for the help CP!!

[cynic783]

You can't actually look at it, as it's not posted, for a few reasons that are listed in the first post. But if you know the part you need, describe it as best you can here in this thread and Greg or Crazy Paul will reply with the part number for it.

Oops, re-read first post. Got it. Thx.

[Eidolon]

I need the part numbers for the rear caliper-to-knuckle retaining bolts, the front GXP caliper banjo bolts, and the copper washers for the brake hoses on all four calipers. This'll be for a stainless steel hose swap.

[Crazy Paul]

I need the part numbers for the rear caliper-to-knuckle retaining bolts,
92172963


the front GXP caliper banjo bolts,

Pontiac GXP Brembo Caliper Securing Bolt M12x1.75 UHL44mm 92139080

Pontiac G8 Brake Banjo Bolt 92193458 (I do not know if the GXP banjo bolt is different to normal G8)....Ask Greg.




and the copper washers for the brake hoses on all four calipers.
92138062

[mike c]

I had this written down and now I can't find it. Can I please have the part numbers for the GXP 19" Wheel Center Caps and Lug Nuts?

[Crazy Paul]

I had this written down and now I can't find it. Can I please have the part numbers for the GXP 19" Wheel Center Caps and Lug Nuts?

Chrome lugnut caps are 92180802 (old number) or 92243849 (new number) = bag of 20.
Chrome lugnut cap is 92180806 (old number) or 92243852 (new number) = 1 single cap.

GXP centre cap = 92203234

[mike c]

Thank you.

[boi1da]

I am looking for the part numbers for the passenger and driver chrome trim that extends along the roof line from the windshield to the back door.

[Crazy Paul]

I am looking for the part numbers for the passenger and driver chrome trim that extends along the roof line from the windshield to the back door.

92196053 Left side gutter drip molding (silver finish).....new number 92219093

92196052 Right side gutter drip molding (silver finish).....new number 92219092

[People call them chrome but they're actually stainless steel.]

[boi1da]

92196053 Left side gutter drip molding (silver finish).....new number 92219093

92196052 Right side gutter drip molding (silver finish).....new number 92219092

[People call them chrome but they're actually stainless steel.]

Awesome! Thanks!

[Marauder]

I picked up some heated, power seats and now need the wiring harness' to accomplish this along with the push buttons on the console. Part numbers would be apprciated.

[AVIDMOTION]

both acessory belts 2009 g8 gt and harmonic balencer and bolt ...AND THANKS

[Crazy Paul]

Harmonic balancer 12635652
Crank Bolt 12557840
A/C Belt 92068285
Main Serp Belt 92067442

[AVIDMOTION]

Awesome, thank you so much....dealer really messed up, trying to fix their mistake.....

[Marauder]

silver trim piece which mounts in center console top plate and surrounds the shift lever on 2008 auto cars

[Crazy Paul]

silver trim piece which mounts in center console top plate and surrounds the shift lever on 2008 auto cars

The silver D is not supposed to be removed, it is not a seperate part. You cannot buy just the D from GM.

New Complete Gear Surround Trim.
2008 Black outer colour, Auto Trans 92206265 (old number) ---> 92235389 (latest number)
2009 Rado Silver (charcoal) colour, Auto Trans 92235390
GXP Manual trans, Rado Silver (charcoal) colour 92225858

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/IMG_2420.jpg

[Whitey72]

Shifter lever for the gxp. The tool that owned it before me decided to epoxy a knob on it.

Sent from my Android

[Crazy Paul]

Shifter lever for the gxp. The tool that owned it before me decided to epoxy a knob on it.

Shall I assume Manual transmission?
(Putting some car info in you sig and location in your profile prevents me and others having to send all kinds of dumb messages to pry info out one bit at a time).

[Whitey72]

Shall I assume Manual transmission?
(Putting some car info in you sig and location in your profile prevents me and others having to send all kinds of dumb messages to pry info out one bit at a time).

Sorry about that. I'm new to all this. Yes manual

Sent from my Android

[Crazy Paul]

The stick or lever itself only comes as part of the shifter assembly.
Item 1....GXP Manual 6 speed shifter assembly.....everything in the lower rectangular box = Part No 92227340.
You cannot fit the complete new shifter assembly without unbolting the gearbox support crossmember & lowering the trans a few inches to get access on top of the gearbox.
What you could do is just rob the parts you need from the new shifter assembly and just change those out from the top.
92227340 is about 1/2 the price in USA compared to Aus....great if you can find one in stock there.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/GXP%20Manual%20shifter/BOOT_.jpg

Now if you also need an Item 2.....new leather shift knob (with skirt or boot) in either black or red hot, I can supply one of those cheaper from Aus than you'll find anywhere else.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/GXP%20Manual%20shifter/a58a_12.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/GXP%20Manual%20shifter/09a902fb.jpg

[Whitey72]

Thanks cp. At that price might as well go aftermarket.

I am interested in an 04-06 gto shift knob with red stitching and matching boot.

Sent from my Android

[boi1da]

I need the part number for the trim piece located on the bottom of the seat belt were the belt connects to the seat. The side closest to the seat has felt on it so as not to scratch the seat plastic. I believe the piece is universal. If not, I need the passenger side.

[Crazy Paul]

I need the part number for the trim piece located on the bottom of the seat belt were the belt connects to the seat. The side closest to the seat has felt on it so as not to scratch the seat plastic. I believe the piece is universal. If not, I need the passenger side.

Front, Passenger side.....Item 2.
89027359 BUCKLE KIT P/SEAT BELT,(INCLS 11,12),(ONYX)

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/61138360.jpg

[BATOYGIO]

Part number for the rear passenger door sill (the whole plastic cover thing).?

Thanks!

[Crazy Paul]

92200197

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/177023703.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/sill-plates.jpg

[BATOYGIO]

Thank you, does that come with the white retainer clips installed in it? Or the metal sill center piece?

[Crazy Paul]

Thank you, does that come with the white retainer clips installed in it? Or the metal sill center piece?

I've never bought one so I don't know.
The way it's drawn would suggest everything is bought seperately, but you wont know 100% until you see the actual part supplied under No 92200197

(If the Part No was a complete assembly with insert and clips it should be drawn with a box around everything that was included as Item3 on the drawing).

[BATOYGIO]

Ok thank you

[SpeedRacerX]

I just want to check a couple part numbers for those familiar with GM parts and stock. My dealer ordered...

92249538. Please tell me that's the new whole 4-set Arm Kit and not just 1? When it says NSA or NSP for parts location or stock location, I hope that doesn't mean No Stock Anywhere...

92198656. This has a hole in it on my car. AC went warm last week. I take it this is an AC line? Location is LANS. Lansing, MI?


Also, does anyone have the part number for the two-piece plastic female threaded peg & male threaded backing part that hold the floor mat in place? This is the dreaded floor mat piece that breaks. I think I'll just replace this myself. I think I read on this forum that it can be replaced from the side and doesn't require ripping up the whole carpet.

Thanks!!!

[Crazy Paul]

92249538. Please tell me that's the new whole 4-set Arm Kit and not just 1?
4 Arms + Fasteners.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/92249538.jpg



92198656. This has a hole in it on my car. AC went warm last week. I take it this is an AC line?
Item1 on the drawing.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071116HE08A480.jpg

[Greg@PacePerformance]

Paul,
Can you get me a price on 92245049 for future reference.
JHP posted it on the other board saying it was replacement buttons for the M6 GXP's.

[Crazy Paul]

Paul,
Can you get me a price on 92245049 for future reference.
JHP posted it on the other board saying it was replacement buttons for the M6 GXP's.

PM sent.

[SpeedRacerX]

Thanks for responding so fast Paul!!!

[Crazy Paul]

Thanks for responding so fast Paul!!!
No problem, Greg should be able to help with the stuff I skipped over.

[pokey]

Also, does anyone have the part number for the two-piece plastic female threaded peg & male threaded backing part that hold the floor mat in place? This is the dreaded floor mat piece that breaks. I think I'll just replace this myself. I think I read on this forum that it can be replaced from the side and doesn't require ripping up the whole carpet.

Thanks!!!

Yes, this can be replaced from the side. You have to remove the "rocker panel" cover which holds the carpet then you can get under there. Here are the part numbers listed on my invoice when the local dealer replaced mine.

qty 1 - 19167707 Retainer
qty 1 - 19167704 Retainer

(not sure why 2 numbers, I only had one replaced?....might be two pieces?

[Crazy Paul]

19167707 could be used just as an assembly/ fitting tool ??.

19167704
It's not a Pontiac or G8 specific part they've used.
It's used on Buick,Saturn,Cadillac,GMC truck,Corvette etc.
It's a generic GM retainer kit (about $10).....must include a heap of the buggers.

19167704 Front/Complete Floor. RETAINER KIT. BUTTON. Toe/Floor Panel.
RETAINER KIT,F/FLR AUX MAT(EBONY)(INCLS TOP & BOTTOM RET)(MAY NEED 19167707 TO FIT MAT RETS)

[SpeedRacerX]

Yes, this can be replaced from the side. You have to remove the "rocker panel" cover which holds the carpet then you can get under there. Here are the part numbers listed on my invoice when the local dealer replaced mine.

qty 1 - 19167707 Retainer
qty 1 - 19167704 Retainer

(not sure why 2 numbers, I only had one replaced?....might be two pieces?


19167707 could be used just as an assembly/ fitting tool ??.

19167704
It's not a Pontiac or G8 specific part they've used.
It's used on Buick,Saturn,Cadillac,GMC truck,Corvette etc.
It's a generic GM retainer kit (about $10).....must include a heap of the buggers.

19167704 Front/Complete Floor. RETAINER KIT. BUTTON. Toe/Floor Panel.
RETAINER KIT,F/FLR AUX MAT(EBONY)(INCLS TOP & BOTTOM RET)(MAY NEED 19167707 TO FIT MAT RETS)

Cool. Thank you both.

[jeffs42885]

Is there a part number for the plug that goes into the stock subwoofer amp?

[STL_G8GT]

Am thinkin about my AFR gauge in the center tray by the cigarette lighter, but would want an extra tray assy to mess around with...

I think I found it...

Is this correct?

http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214858&chapter=&Sectionids=0,2610&groupid=4805&subgroupid=5199&componentid=0&make=28&model=G8&year=2009&graphicID=FR08365&callout=24&catalogid=2&displayCatalogid=0

[Crazy Paul]

Is there a part number for the plug that goes into the stock subwoofer amp?
Yazaki/Tyco/Bosch 7123-1423
12 way connector
(Same as in 2004, maybe 05 & 06 also, Pontiac GTO)

[Crazy Paul]

I think I found it...
Is this correct?


Difficult to tell since they don't give the Part No.
The stock G8 front lower compartment is not as they've drawn it with a full width curved door and a rubber tray insert available.
The drawing is of the Holden Calais full sized compartment which does not fit into the G8 centre stereo stack housing.

You want this:
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/2011-02-26_12-21-29_719.jpg

They've drawn this instead:
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/GPS%20mod/R1010024.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/GPS%20mod/R1010028.jpg

[STL_G8GT]

Difficult to tell since they don't give the Part No.
The stock G8 front lower compartment is not as they've drawn it with a full width curved door and a rubber tray insert available.
The drawing is of the Holden Calais full sized compartment which does not fit into the G8 centre stereo stack housing.

They've drawn this instead…

Paul, you're right - as usual - do you have the correct part number?

[Greg@PacePerformance]

The part you are looking for is 92206138 - $27.73


Am thinkin about my AFR gauge in the center tray by the cigarette lighter, but would want an extra tray assy to mess around with...

I think I found it...

Is this correct?

http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214858&chapter=&Sectionids=0,2610&groupid=4805&subgroupid=5199&componentid=0&make=28&model=G8&year=2009&graphicID=FR08365&callout=24&catalogid=2&displayCatalogid=0

[Crazy Paul]

The part you are looking for is 92206138 - $27.73
Thanks Greg, for some reason it's Pontiac specific.
Item 2 on this pic....everything in the Z shaped box = 92206138
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/091015HE09A308.jpg

[Greg@PacePerformance]

Yup that is it Paul. Weird that it is Pontiac only.

[STL_G8GT]

Thank you gentlemen!

[jeffs42885]

What about the plastic piece for the trunk. The trim piece by were the trunk latch latches..

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071112HE14A800.jpg

Item 5 = 92213099
PANEL. Rear Compartment Trim

Item 8 = 24405740
CLIP; RETAINER (4x reqd)

[MongosG8]

^^Thanks Paul for providing 92213099 .. I was about to ask for this myself. I split mine up the middle.

[jeffs42885]

What about the pins that hold the carpeted trunk liner in

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Trunklid-Liner.jpg

[jeffs42885]

Yazaki/Tyco/Bosch 7123-1423
12 way connector
(Same as in 2004, maybe 05 & 06 also, Pontiac GTO)

Can you get this part? I cannot find it anywhere.

[Crazy Paul]

Can you get this part? I cannot find it anywhere.

No sorry.

[SpeedRacerX]

OK so I am confused a bit now. I went to the dealer to find out what exactly these floor mat retainers are and which one I need for my G8: 19167704 & 19167707.

The guy at the parts counter pulled them up and they don't show for the G8; they show for other cars. In addition, they mentioned something about possibly needing the pieces that go in the mat too to adapt to these retainers. I found that strange when all I need is the two-piece assembly that goes right above and right below the carpet. Another flag was the color. Titanium and Black didn't seem right to me.

I had the parts guy check for the parts for the G8. This is what he showed me.

The two-piece floor mat retainer on the sketch shows the bottom piece as #8 (below the rug) and the top piece as #7 (above the rug and attaches to the piece under the rug). The lower part #8 does NOT have a Part Number and says it's part of # 2 which is p/n 92204571 "Carpet!" The upper piece #7 is p/n 13142333. This part says it's part of #5 which is p/n 90214832.

So from this it looks like for me to get the lower and upper floor mat retainer that goes in the carpet, I need:

1. A piece that has no p/n and can't be had separately without buying the carpet, pn 92204571.
2. A piece with p/n 13142333 that either can be bought separately or must be included with 90214832. Unsure if it can be bought separately...

I can't believe fixing this little issue has become so complicated!

Paul or Greg, any thoughts on this???

[DZ28]

I had one floor pin replaced on both passenger and driver side due to them breaking off. This is part of campaign 09-08-110-015 and the dealer ordered, quantity of two, part number 92240165 and it is called a retainer. This took care of my floor mat issue and should cover yours...

[Crazy Paul]

and the dealer ordered, quantity of two, part number 92240165 and it is called a retainer. This took care of my floor mat issue and should cover yours...

92240165 comes up as "Retainer Kit", I don't know how many items come in the kit.
It's less than $3 so I'll buy one and find out.

Here's the pic to go with SpeedRacerX's story.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071112HE14A700.jpg

[SpeedRacerX]

I had one floor pin replaced on both passenger and driver side due to them breaking off. This is part of campaign 09-08-110-015 and the dealer ordered, quantity of two, part number 92240165 and it is called a retainer. This took care of my floor mat issue and should cover yours...

Great, thank you. Let me go help the parts guy with this info. LOL.


http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071112HE14A700.jpg

Yeah, that's the pic. I need 7 and 8.

[Crazy Paul]

GXP Front Fascia Parts.
The Blue are only for GXP......remainder fits both GXP and G8.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/100702HE07A631.jpg

001 92213340 FASCIA,FRT BPR. Required: 01For: E PONTIAC G8 GXP(V9R)
002 92159883 REINFORCEMENT,FRT BPR FASCIA - LH.
002 92159884 REINFORCEMENT,FRT BPR FASCIA - RH.
003 90589346 RIVET,FRT BPR FASCIA REINF(4X12,7MM,DISC 11 DIA)(07.840). Required: 02
004 11561674 BOLT,FRT BPR IMP BAR UPR REINF(6 X 1 X 20)(FLAT WA)(08.900). Required: 02
006 92215972 LAMP,FRT SI MKR - LH.
006 92215973 LAMP,FRT SI MKR - RH.
007 92193045 SOCKET,FRT SI T/SIG LP. Required: 02
008 92077791 BULB. Turn Signal BULB,FRT SI T/SIG LP(AMBER). Required: 02
012 92213345 BRACKET,FRT LIC PLT. Required: 01For: EK69 PONTIAC G8 GXP(V9R)
013 92139099 BOLT,FRT LIC PLT. Required: 04For: E FRT LIC PLT MTG PKG(VK3),PONTIAC G8 GXP(V9R)
015 92201784 ABSORBER,FRT BPR ENGY. Required: 01
016 92224778 INSERT,FRT BPR LWR FASCIA TR. Required: 01For: E PONTIAC G8 GXP(V9R)
017 92138627 BOLT,FRT BPR FASCIA EXTN(10.252). Required: 04
018 92139101 BOLT,FRT BPR FASCIA(02.726). Required: 02
019 92138627 RETAINER,FRT BPR UPR FASCIA (PUSH IN)(10.252). Required: 02

11515638 - GXP Lower Insert Nut
11589015 - GXP Lower Insert Screw

Pontiac G8 Upper Kidney Grilles
92201780 left & 92201781 right.

Pontiac G8 Front Arrowhead Emblem Red 92205700
Pontiac GXP lower rad grill 92213351
Pontiac GXP Front Foglight Bezel LH 92213349
Pontiac GXP Front Foglight Bezel RH 92213350

[Crazy Paul]

Yeah, that's the pic. I need 7 and 8.

1 x 92240165 gets you a 7 and an 8.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/R1010591.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/R1010592.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/R1010593.jpg

[SpeedRacerX]

^^^ YES!!! Thank you. I was at the dealer last night going over that p/n with them and they could NOT tell me how many pieces it had or what it looked like. Finally.

Thank you CP!!!!

[Trev]

I apologize if I missed it, but does anyone know the part number for the plastic tabs that hold the upper chrome trim above the windows in place. Below is a pic.

http://c4.ac-images.myspacecdn.com/images02/81/l_f65587fd5b724808915b1baf4d5820ff.jpg

[Crazy Paul]

Is this what you're asking Trev?
http://forum.grrrr8.net/showthread.php?t=23083&p=341119&viewfull=1#post341119

There's a stickied thread about trim clips:
G8 Tech/Detailing & Appearance/Trim Clip ID with pics.

[Trev]

Is this what you're asking Trev?
http://forum.grrrr8.net/showthread.php?t=23083&p=341119&viewfull=1#post341119

There's a stickied thread about trim clips:
G8 Tech/Detailing & Appearance/Trim Clip ID with pics.

Yes, that's it. Thanks CP!

[jwhitten]

Do you have the part number for the tapered cam retaining plate bolts for the l76? Had to drill and easy out mine and its holding me up on putting my motor back together

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/50750322.jpg

[TooManyHobbies]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/50750322.jpg

I think the illustrator put the dampner upside down!

[Crazy Paul]

I think the illustrator put the dampner upside down!
It's the LS2 damper (upside down) and not the L76 brown/yellow tensioner which should be drawn there.
He's also drawn a single lump (1x) cam reluctor wheel with 3 bolts....ala 2005LS2, instead of the 4 lump (4x) single bolt reluctor as per L76.

He's tried to draw this.....................2005LS2
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/crap/damper344.jpg

Instead of drawing this ...........L76 car.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/crap/L76344.jpg

[jwhitten]

Thank you sir....i hope its the beveled bolts im looking for.

[Crazy Paul]

Thank you sir....i hope its the beveled bolts im looking for.

Yes, 11561455 is the countersunk bolt.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/L76/countersunkbolts.jpg

For use with the countersunk cam retainer plate.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/L76/countersunk.jpg

[2000blk]

Looking for the part number for the white plastic reatainer that holds the rear botom seat cushion down.

[Crazy Paul]

Item 008 24437789 RETAINER. Rear Seat Cushion

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/239431646.jpg

[hflores3]

Gentlemen, what are the part numbers for the wheel center caps and the lug nut covers? Thank you kindly

[Crazy Paul]

Gentlemen, what are the part numbers for the wheel center caps and the lug nut covers? Thank you kindly

92203235
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Badges/R1010468-1.jpg


92203234
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Badges/HPIM0812-500-1.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Badges/HPIM0810-600.jpg

92180807 = Single black cap,(New No 92243850),,,,,,, 92243847 = Pack of 20 black caps
92180805 = Single silver cap,(New No 92243851),,,,,,,,
92180806 = Single chrome cap,(New No 92243852),,,,,,, 92180802 = Pack of 20 chrome caps,(New No 92243849)


http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Badges/R1010343-1.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Badges/R1010342-1.jpg

[donkeyGT]

I was blowing the engine bay out last nite and all of a sudden this rubber bumper comes jumping out at me..can not for the life of me figure out where it goes..#92177210..can post a pic later today if need be..thanks in advance.

[Crazy Paul]

can not for the life of me figure out where it goes..#92177210..

Item 3, there's one on each side.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071114HE12A025.jpg

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/enginebay.jpg

[donkeyGT]

Thanks again CP..I must be missing the other one also because thats where I first started looking.

[-Ray-]

I just want to thank everyone who has helped out in this thread, especially CP and GREG. Cheers

[sp44]

Looking for bolt that attaches windshield wiper fluid container (neck) to bracket up top. Thanks!

[Greg@PacePerformance]

Me also.
GM USA doesn't list in the catalog and I need one. I guess we will have to wait for CP to awake.

[Crazy Paul]

Me also.
GM USA doesn't list in the catalog and I need one. I guess we will have to wait for CP to awake.

Ok yes I see the issue.
I'll see what I can come up with on Monday for you guys.

[hflores3]

Man, we should all chip in and buy Crazy Paul a keg of his favorite beer for all the free help he is providing us with part numbers!!

[Crazy Paul]

Looking for bolt that attaches windshield wiper fluid container (neck) to bracket up top. Thanks!

Me also.
GM USA doesn't list in the catalog and I need one.

Try 92139101 (If you have no stock or it costs more than $1, then try #11561674.....they should be the same thing. M6x1 x20 long bolt with washer included.

If you're also missing the nut, it's a 6mm U type speed nut.......should be #11516372

[Greg@PacePerformance]

Not sure if either are correct.
19139101 is the one that holds the top of the fascia and radiator mounts, and 11561674 is the bolt that holds the condenser to the radiator.
I will check them against the wifes car tonight with an update.
Thanks Paul.

[Crazy Paul]

92139101 BOLT.
Bumper/Fascia. Capsule/Headlamp/Fog Lamp Mounting. Front and Rear Bumper/Fascia Face. Fuel Tank Evaporator Control. Horn. Radiator. Transmission Oil Cooler. Windshield Washer.

[Purf]

Paul -- Just in case, I would like to order a complete brake kit for my 2009 G8 GXP, including the full Brembo kit up front for future replacement. Can you quote me a price for all four wheels? Thanks in advance. Regards.

[Crazy Paul]

Paul -- Just in case, I would like to order a complete brake kit for my 2009 G8 GXP, including the full Brembo kit up front for future replacement. Can you quote me a price for all four wheels? Thanks in advance. Regards.

Try Greg@WasSlow for your braking needs. I think shipping just one set from Australia will be a dead duck because of freight costs.

[sp44]

What's the number of the silver trim piece above the glove box?

[Greg@PacePerformance]

92217336 - (888)
92204530 - Micro silver (08-09)
92213828 - ?????

[sp44]

92217336 - (888)
92204530 - Micro silver (08-09)
92213828 - Rado silver (09.5) I think

Thanks Greg!

[jwhitten]

Do you know the P/N for the transmission bellhousing bolts....I am almost ready to put my motor back in and seem to have lost 2 of them.

[Crazy Paul]

Item 1
11515768
BOLT TRANS,(M10X1.5X40)

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/201141621.jpg

[BlackGT5]

92217336 - (888)
92204530 - Micro silver (08-09)
92213828 - Rado silver (09.5) I think

FWIW, my 09.5 uses the 92204530 Micro Silver.

[Greg@PacePerformance]

FWIW, my 09.5 uses the 92204530 Micro Silver.
That is odd so does my GXP. I wonder what the other one is.
I will edit my post. The 2008 parts catalog didn't list 92213828 so I was just guessing 92213828 was the 09.5 but I guess not. Maybe Paul has an idea.

[Crazy Paul]

Maybe Paul has an idea.
It's going to be a group effort to sort this out.
Look up your list of "Option Codes" and tell me what the A stands for in "Ve8Ap"

The 92213828 goes with VE derivative, MY2008, ......something......, Pontiac.

The 92204530 goes with Veve (so if it fits a left hand drive Pontiac that's a bonus)

The 92217336 goes with Vevep (something specific to Pontiac about this one)

[Greg@PacePerformance]

I am pretty sure I figured it out.
It is part of the GM accessory package.
12137

[hflores3]

Paul, what is the part number to the antena on top? (drove off and left the damn thing at the car wash!)

[Crazy Paul]

Ignore the way it's drawn, they've shown the Holden version even though the Part Number comes up as specific to Pontiac. Actually you'll probably need to eyeball the part before buying to make 100% sure it is correct.

Item 1 92202554 ANTENNA. Radio Antenna
ANTENNA,RDO. Required: 01For: E RF ANT(U71) (2008-2009)

Item 2 92218065 BASE. Radio Antenna
BASE,RDO ANT. Required: 01For: E RF ANT(U71) (2008-2009)

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071114HE09A400.jpg

[-Ray-]

I'm not looking forward to tackling this thread.

[hflores3]

I'm not looking forward to tackling this thread.

Why not Ray? Im not making the connection....not the right part? Opinions vary?

[-Ray-]

Why not Ray? Im not making the connection....not the right part? Opinions vary?

Henry, I'm working on organizing the forum. There are maybe a 100 different part numbers found in this thread for various sub systems of our cars.

[joseph_99TL]

can you tell me if this is the modified trans mount part #?
92237122

[Crazy Paul]

can you tell me if this is the modified trans mount part #?
92237122

http://forum.grrrr8.net/showthread.php?t=19214&p=306145&viewfull=1#post306145

Mount Asm Trans (Ve1) 92237122 Ve1 means VE car platform, MY 2011.

[icantdrive55]

What is the part# for the Glove Box Door Assist Cylinder? After reading the thread about the randomly opening glove box I checked to find mine does not have the cylinder at all. Thanks much - Mike

[Greg@PacePerformance]

It is part number 92198445 - about $8.50

[icantdrive55]

Thanks Greg.

[TooManyHobbies]

I have been working on installing the Edelbrock coil covers. When they say they do not work with stock applications and modifications may be necessary, they really mean it. Anyway, I got done cutting and grinding the covers so that I clear everything. They are looking good. Time to install the coils and mount them. @%$%$%$&^*#@# The coils my G8 came with are 12570616. They have 72 mm spacing for the mounting bolts for the coils. The Edelbrock coil covers have a 65 mm spacing! The covers are supposed to be for Gen III and IV engines, so there must be coils out there that fit. Anybody have a coil part # with 65 mm spacing? Is it compatible with the G8 engine?

Thanks in advance.

[Crazy Paul]

Anybody have a coil part # with 65 mm spacing? Is it compatible with the G8 engine?

Yes I've got some here with 65mm vertical spacing.....I'll get the details later for you.
Sounds like you're chasing your tail though, because with different coils comes different coil mounting brackets, possibly even different valve covers.
$$$$$$$$
Might be time to stop and see if you were given the correct part number to begin with and if its really worth the drama IMO.

[TooManyHobbies]

Yes I've got some here with 65mm vertical spacing.....I'll get the details later for you.
Sounds like you're chasing your tail though, because with different coils comes different coil mounting brackets, possibly even different valve covers.
$$$$$$$$
Might be time to stop and see if you were given the correct part number to begin with and if its really worth the drama IMO.

Thanks CP. The coils mount directly to the coil cover, so I am OK on brackets and valve covers. The only thing I am worried about are if there are wiring differences.

Next issue: The oil filler neck is about 1/2 inch or 13 mm too short to clear and get the cap on, any suggestions?

[Crazy Paul]

Thanks CP. The coils mount directly to the coil cover, so I am OK on brackets and valve covers. The only thing I am worried about are if there are wiring differences.
OK confirmed, vertical spacing of bolt holes in coil is 65mm.
Coil Part No 12558948. LS1 coil 1999-2004
Plug wire from G8-GT will still fit but the small connector on each coil is different.
To use the 8x LS1 coils you'll also need 2 x 12582190 (4 into 1 coil harness).
The large group connector on the end of the LS1 (4-1) harness is the same as for L76.
Gen3(LS1) coils are supposedly not as good as the later Gen4(LSx) coils.

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/044.jpg

--GEN 4 --
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/P1010127.jpg

--GEN 3 --
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/P1010128.jpg

[TooManyHobbies]

Next issue: The oil filler neck is about 1/2 inch or 13 mm too short to clear and get the cap on, any suggestions?

Was able to use the existing neck, but it is extremely tight. About 3-5 mm longer would work wonders. If I cannot find another filler neck (all LS filler necks are the same as far as I have found), I will find a different cap to take some strain off.

[Crazy Paul]

G8 FRONT SUSPENSION LOWER CONTROL ARMS.

2008 & 2009 Part Numbers

Rear Straight Control Arm ...........(Item 5)
92183309 Right Hand Side ---- No Longer Available in Aus, Use 92244050.
92183310 Left Hand Side ---- No Longer Available in Aus, Use 92244051.

Front Dog-Leg Control Arm ..........(Item 7)
92224668 Right Hand Side --- No Longer Available in Aus, Use 92244046
92224667 Left Hand Side --- No Longer Available in Aus, Use 92244047
-------------------------------------------------------------------------------------
UPDATED CONTROL ARMS BELOW CAN BE USED ON 2008+ CARS.
--------------------------------------------------------------------------------------

VE9R 2009.5+ Part Numbers

Rear Straight Control Arm .............(Item 5)
92244050 Right Hand Side ----
92244051 Left Hand Side ----

Front Dog-Leg Control Arm ...................... (Item 7)
92244046 Right Hand Side ---
92244047 Left Hand Side ---

Just buy the Complete Kit of 4 (2009.5) arms with fasteners there in USA for about $220.
GM Kit Part Number 92249538



VE1 2011+ Part Numbers

VE 9.5 Individual Arms----supercedes to-----VE1 (2011) Individual Arms
92244046--------------------------------------> 92253412
92244047--------------------------------------> 92253411
92244050--------------------------------------> 92250640
92244051--------------------------------------> 92250641

No Kit Number has been released yet for the 2011 full set of 4 arms with fasteners.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/R1010023_01.jpg

[StBlGT]

question...i know the part #'s for the front kidney grills with the chrome around them are 92201780 and 92201781, but, i was wondering if it was possible to NOT have to purchase the whole grill with the chrome. i just want to buy the chrome pieces, not the honeycomb grill. anyone know if that's possible and if so, part #'s. thanks.

[Crazy Paul]

Not possible.
The smallest piece you can buy new from GM are the Part numbers you've quoted.

http://parts.nalleygmc.com/images/parts/gm/fullsize/090529HE07A516.JPG

[StBlGT]

^^^ thanks, i appreciate it.

[donkeyGT]

??..can you get just the lens for the headlight assembly or do you have to get the whole thing? part #'s for passenger side please.

[Greg@PacePerformance]

You must buy the whole assembly the part number for the passenger side lamp is 92224813 - $279.00

[donkeyGT]

Thank You Greg.

[roman1978]

looking for part number for dark grey steering wheel insterts

[Crazy Paul]

looking for part number for dark grey steering wheel insterts
Cover Kit, Steering Wheel Spoke, (RADO SILVER) 92194422

[Greg@PacePerformance]

Cover Kit, Steering Wheel Spoke, (RADO SILVER) 92194422
Must buy from Paul as it isn't available over here.

[bigtreepu]

I have a couple of items I'm in need of. On the back drivers head there is a white plastic holder that a vacuum line plugs into. It is just a cap, I believe. Do you guys know the part # for that piece?? I also broke a couple of the clips that are in the front and rear driver head that hold power steer pump wires. They are black clips that you push in, and they are almost like zip ties. Any ideas?

-Matt

[roman1978]

I have read on the other forum some people purchased Steering wheel inserts hear in US. They are dark grey and its 2 peace I am not talking about the buttons the silver inserts there should be 2 part #

[BlackGT5]

I have read on the other forum some people purchased Steering wheel inserts hear in US. They are dark grey and its 2 peace I am not talking about the buttons the silver inserts there should be 2 part #

you talking about this??:

# 92213827

http://i582.photobucket.com/albums/ss266/blackgt5/92213827.gif

[roman1978]

No they were cheap like $20 each

[Greg@PacePerformance]

I think you are asking about the trans vent correct? #2?
12522


I have a couple of items I'm in need of. On the back drivers head there is a white plastic holder that a vacuum line plugs into. It is just a cap, I believe. Do you guys know the part # for that piece?? I also broke a couple of the clips that are in the front and rear driver head that hold power steer pump wires. They are black clips that you push in, and they are almost like zip ties. Any ideas?

-Matt

[Crazy Paul]

I also broke a couple of the clips that are in the front and rear driver head that hold power steer pump wires. They are black clips that you push in, and they are almost like zip ties. Any ideas? -Matt

I know what you're talking about. The front black clip goes on the cam sensor portion of the powertrain harness and the rear black clip goes on the oxygen sensor portion of the powertrain harness.
I've tried sourcing these and cannot find a part number...all I keep getting told are they are part of the harness.

Cable-tie section of this one is broken, the only number on the item leads me nowhere.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/3646TA1.jpg

Greg:
GM Drawing HE02A706 shows the Engine Harness with the front clip for supporting the leg which runs to the Cam Sensor attached.
There's another GM Drawing HE02A705 which shows ITEM 3, and in Australia Holden give Part No 08917257 for it.
This is a metal J clip and is not what is fitted to the VE at all.
Other VE Harness Parts Numbers which are not correct are : Bracket 92056538 & Retainer 96017928

In USA, GM give ITEM 3 Part No 19130464 for the Pontiac G8-GT V8 MYC 2008-2009
This part is not correct either, it's a generic Ziptie about 7" long with a 1/4" rosebud which is too small for the M10 metric holes.

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/front-harness-clip800.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/IMG_3251resized.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/L76-7.jpg

The Parts drawing and info from Holden shows a metal J clip and would require a bolt to secure it....this isn't what's fitted new from factory.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/090528HE02A705.jpg

Item 3 on drawing.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/R1010616.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/Clips/R1010615.jpg

[bigtreepu]

Yes to Greg, and yes to Crazy Paul as well. Those are both of the parts that I need. Now if only a part existed for the little clip. Any idea on the thread pitch? I'll try a M10 1.5 tonight. I have no problem picking up a couple small extra bolts if I need to. Thanks!!!

[Crazy Paul]

If you're going to use the metal J clip then you'd want a metric bolt....thread M10x1.5, length 25mm to maximum 30mm.

[Greg@PacePerformance]

Yes I come up empty on the clips also. Looked for them a few months back and thought I found it but it was 19130464 and not the correct size. All my info says part of harness even in other vehicles.

[Greg@PacePerformance]

The vent valve is part number 92189630

[bigtreepu]

Dang, they said the vent valves come in packs of 10. Anybody have 1 I could buy off them?
-Matt

[Greg@PacePerformance]

I can get you one but it will take about a week for me to see it. - $12.59 plus shipping to you and tax since you are in Ohio.

Give this guy a call if you need it now.
EDW. J. SCHWARZ, INC.
(HONESDALE, PA)
9 in stock (570) 253-4222

[bigtreepu]

I can wait. Let me know when you get it in. I can pre-pay if you'd like.

-Matt

[Greg@PacePerformance]

On order will send a PM when I get it.

[SpeedRacerX]

Paul or Greg or anybody else...

I know this isn't a part request but does anyone have a color picture or even a B&W image or sketch showing the complete underside or undercarriage of our car? I could use this for a new project I am planning.

Thanks in advance if anyone can assist. I have plenty of pix of various sections of my car and other cars but not a picture or sketch of the whole bottom.

[Crazy Paul]

G8-GT with stock exhaust.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/VE%20under/g820stock20under-1.jpg


G8-GT with aftermarket exhaust.
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/VE%20under/G82025inch-1.jpg

Stock GXP
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/VE%20under/GXPunder.jpg

[SpeedRacerX]

Once again.......you are THE MAN!

Thanks Paul!

[Crazy Paul]

Massive pics from under a VE Series 2 (if you want to look at fine detail)
Right click, Save target as.

http://www.grrrr8.net/crazypaul/Aero-138.jpg

http://www.grrrr8.net/crazypaul/Aero-139.jpg

[RamJet]

Paul, how much do those under-panels actually help? What would it cost to get a set of those to Texas?

Thanks for the cool pics! I wish there was one like the second listed above but without the panels.

[Crazy Paul]

Paul, how much do those under-panels actually help? What would it cost to get a set of those to Texas?
I have no idea.
There's a thread already running about the panels.
http://forum.grrrr8.net/showthread.php?t=27694
I've got a full set of 5 panels here, I just need to get under a VE on a hoist to figure out all the fasteners. Holden drawings don't show panel to car fasteners. Have got a hoist organised for Monday sometime.
Shipping is going to cost more than the parts because the front panels are too long for Postal System airfreight.
Have to sit down and work out how best to bundle them and probably some kind of group buy arrangement due to the International freight costs.

[Blown396]

Do you have the Part# for the trunk spoiler?
Thanks

Eric

[RamJet]

I have no idea.
There's a thread already running about the panels.
http://forum.grrrr8.net/showthread.php?t=27694
I've got a full set of 5 panels here, I just need to get under a VE on a hoist to figure out all the fasteners. Holden drawings don't show panel to car fasteners. Have got a hoist organised for Monday sometime.
Shipping is going to cost more than the parts because the front panels are too long for Postal System airfreight.
Have to sit down and work out how best to bundle them and probably some kind of group buy arrangement due to the International freight costs.

Thanks for the reply. We drive ours enough that it may be worth the investment, especially on a group buy!

[Crazy Paul]

Do you have the Part# for the trunk spoiler?
Thanks
Eric

92217652

[Crazy Paul]

Thanks for the reply. We drive ours enough that it may be worth the investment, especially on a group buy!
Go to the link quoted above.
I did a test fit today and there's a heap of important mounting points missing from cars made prior to Series2.

[jcmGT]

part number for the protective cover on the positive post on the drivers side strut tower?

TIA

[Crazy Paul]

part number for the protective cover on the positive post on the drivers side strut tower? TIA
92190433

[AVIDMOTION]

Idler pulley on the ac belt( small one at bottom of belt rotation on the ac belt)
thanks for your efforts

[Crazy Paul]

Idler pulley on the ac belt( small one at bottom of belt rotation on the ac belt)
thanks for your efforts

They don't sell the wheel piece seperately, it comes as part of the A/C tensioner.
[Item 5 shown is the idler wheel for the main belt, not the A/C belt]

003 12595289 TENSIONER. A/C Compressor Drive/Idler
TENSIONER,A/C CMPR BELT. Required: 01For: E 6.0Y W/CYL DEACTVN(L76) (2008-2009)
For: E 6.2W(LS3) (2009-2009)


http://parts.nalleygmc.com/images/parts/gm/fullsize/0711071Y01-037.JPG

[hflores3]

Paul / gents, what is the part number to the valve keepers? I'm doing a valvespring / rocker swap and these little boogers tend to drop into the chasis -- never to be found!! I just need a few extras in reserve!

Thanks! hflores3@comcast.net

[Crazy Paul]

Paul / gents, what is the part number to the valve keepers?

10166345
KEY. Engine Valve Spring Cap. Valve Stem.
Required: 32 per engine.

[hflores3]

I need to buy you are gargantuan beer Paul!!! By the way, what is the preferred method for setting lifter pre-load for Yella Terra 1.85 roller rockers? I have the PAC1518 valvesprings along with the 7.450 pushrod......what is best method / approach for pre-load Paul?

[Crazy Paul]

http://www.ls1howto.com/index.php?article=21

[tchr49]

Part number for center console rear piece, includes rear a/c vents and cubbyhole

[Crazy Paul]

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/401956815.jpg
Item 10. 92172603 Housing, Onyx 08&09
Item 24. 92138633 Bolt 08&09

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/090601HE14A942.jpg
Item 3. 92176858 Cover [Rado Silver] 2009
Item 3. 92178096 Cover [Black] 2008
Item 4. 92215166 Outlet Air 08&09
Item 5. 92138633 Bolt 08&09
Item 6. 92176856 Cover [Rado Silver] 2009
Item 6. 92178095 Cover [Black] 2008

Sorry I don't have info at hand for the lower rear cubby hole or rubber insert tray. Will post when I find it.

[hflores3]

http://www.ls1howto.com/index.php?article=21

Damn Paul!!!! You are incredible man! thank you!

[StBlGT]

i have a question. back on page 7 it has the part #'s for the hood vents only. it says #92221708 for the left and #92213788 for the right. however, i went to gmpartsdirect.com and typed those in and only the left side vent was found. #92213788 wasn't in the system. then i typed in #92221709 (one number higher than the left side vent) and it came up right side vent. is this legit and for the G8? i didn't read through the rest of the pages to see if it was corrected, just wanted to make sure. also, these come unpainted i'm assuming, correct? thanks.

[Crazy Paul]

i have a question.
http://forum.grrrr8.net/showthread.php?t=14116&p=201440&viewfull=1#post201440

[StBlGT]

^^^ thanks for that quick response! there's no way you can get them already painted right?

[Crazy Paul]

there's no way you can get them already painted right?
Maybe a stealership would do it for extra money.
From factory they are just bare plastic, if there were colour options there'd be 10 different part numbers involved, ala door handles and rear parking sensors.

[Mads]

13708

Looking for item #20 in this image. The piece that the shifter trim clicks into.

And can you please confirm the following part numbers for me?
092172574 - Glove Box light/switch Harness
094580496 - Glove Box Switch
12787007 - Clear lens Trunk Lamp

Thanks in advance!

[Crazy Paul]

#20 is 92170898 PANEL I/P CTR TR,(LOWER SECTION),(ONYX),(10.235)

92172574 Glovebox Harness
94580496 Glovebox Switch
12787007 Clear lens lamp

Alternative clear lens and bulb
Clear Lens Lamp 90047484
Bulb 11015639

[Mario gt]

Are the g8 taillights 92202360 and 92202359 the ones with the clear corner? I am looking for the ones that came off of the base model that are red with the all white strip on the bottom.

[Crazy Paul]

Yes.

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/tails.jpg

Base. V6
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/DSC_2281.jpg

V8. GT & GXP
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/untitled30.jpg

[jonnynadeau]

I'm looking for the part # for the wiring harness that connects to the headlights.

When I got into an accident a while back the stealership must have broken the clips and cut all the wires on each headlight then just taped over the soldier. Now one of my headlights keeps burning out the bulbs!


iPhone, Tapatalk, enough said!

[Crazy Paul]

I'm looking for the part # for the wiring harness that connects to the headlights.


92202585 HARNESS. Chassis Wiring
HARNESS,F/CMPT WRG. Required: 01For: EK69 PONTIAC G8 BASE(A9O),PONTIAC G-8 GT(V7P) (2008-2009) (2008 - 2009).

92221646 HARNESS. Chassis Wiring
HARNESS,F/CMPT WRG. Required: 01For: EK69 BREAKPOINT FOR 2009 1/2 MODEL YEAR(BSI),A/C MAN CONT(C60),PONTIAC G8 BASE(A9O) (2009-2009) (2009 - 2009).

92221649 HARNESS. Chassis Wiring
HARNESS,F/CMPT WRG. Required: 01For: EK69 BREAKPOINT FOR 2009 1/2 MODEL YEAR(BSI),A/C FRT AUTO/AUX CONT(CJ2) (2009-2009) (2009 - 2009).

A9O - MERCHANDISED PKG PONTIAC G8 BASE; BSI - IDENTIFICATION BREAKING POINT 2009 1/2 M.Y.; C60 - AIR CONDITIONER,FRONT,MANUAL CONTROLS; CJ2 - HVAC SYSTEM AIR CONDITIONER FRT, AUTO TEMP CONT, AUX TEMP CONT; V7P - MERCHANDISED PKG PONTIAC G8 GT;

[gtomark71]

2009 Pontiac G8 GXP VIN# 6G2EP57W99L304259
I am looking for the GM part number for the manual M6 red/onyx shift knob;
the part number for keyless remote transmitter for GXP M6 w/o remote start;
and the part number for rear compartment trim panel. (near the trunk locking latch).
Thank you in advance.
Mark

[Crazy Paul]

Manual M6 red/onyx shift knob 92184837 (Item 2)
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/100319HE04A410.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/92184837.jpg

Keyless remote transmitter for GXP M6 w/o remote start 92237318 (Item 2)
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071114HE11A490.jpg

Rear compartment trim panel. (near the trunk locking latch).
92213099 <--- old number, no longer avail. (Item 5) new Number 92251455
24405740 (Item 8)...4 per car
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/071112HE14A800-1.jpg

[Rbarganier]

Paul you should publish this list and sell it for like 5 bucks. I would like a hard copy in my glovebox just to have incase I had the urge to replace something on the road lol

[Greg@PacePerformance]

Paul,
Over here #5 in the trunk is 92251455 I check because mine is cracked and wanted to know how much a new one was when I saw the picture :)

[MongosG8]

Greg ..can you get part# 92251455 ..if so can you PM me the cost? .. I cracked mine 2 weeks ago.

Thanks!

[STL_G8GT]

Greg ..can you get part# 92251455 ..if so can you PM me the cost? .. I cracked mine 2 weeks ago.

Thanks!

Me too... horrible design...

[MongosG8]

Me too... horrible design...

Its Awful! Dealer would not replace it either.

[Greg@PacePerformance]

I can. I bet all of ours are broke in the same place lol
GM has them in my local warehouse so about 1 day to me.
$56.22 plus shipping
Might be cheaper shipped from Paul but I don't know his price on it.

[Crazy Paul]

Paul,
Over here #5 in the trunk is 92251455
System is back up, you're correct. 92251455 is the latest number.
92213099 supercedes to 92251455 which means they're interchangeable and definately fit the VE/G8.


$56.22 plus shipping
Might be cheaper shipped from Paul but I don't know his price on it.
I can't beat that because of International shipping charges from here.

[hflores3]

Paul, what is the part number for our key fob "with" remote start? (2009 GT)

[Crazy Paul]

Paul, what is the part number for our key fob "with" remote start? (2009 GT) 92237316

[gtomark71]

Thanks for your effort Crazy Paul

[GeoffA]

Camaro 3.45 diff

Greg can you get the seals? don't know the part number.

[Greg@PacePerformance]

Sure I can get them. They are in a local warehouse so only a day wait for them to get to me. Order before noon and I have them the next day.

[GeoffA]

Sure I can get them. They are in a local warehouse so only a day wait for them to get to me. Order before noon and I have them the next day.

I'm going to be working on a list of parts for you! Mostly suspension bolts. Once I get all the parts I'll list them in a PM. Hopefully next week, I'll be on vacation so I can get some work done on the car.

Thanks

[fixem2]

Part number for a 2008 GT - Transmission Input shaft seal

[95_9C1]

is there a part number for the four bottom front fascia screws ?

they have a 7mm head and about 2.5cm in length

TIA

[Crazy Paul]

Part number for a 2008 GT - Transmission Input shaft seal

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/6L80E/404371532.jpg

http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/6L80E/MYC-TC.jpg

[Crazy Paul]

is there a part number for the four bottom front fascia screws ?
they have a 7mm head and about 2.5cm in length
TIA

92138627
RETAINER. Front and Rear Bumper/Fascia Face. BOLT. Bumper/Fascia. Cowl Top Vent Louver. Front Fender Inner Wheel House. Generator Mounting. Radiator Grille and Front End Ornamentation. Radiator Grille and Front End Panel. Rear Wheelhouse.
BOLT,FRT BPR FASCIA EXTN(10.252). Required: 04For: E (2008-2009) (2009 - 2009).

ITEM 017 on a GXP = 92138627
Also could be # 11589015 (M4.2 x 20mm)
http://www.totalauto.com/image/349574_450x450.jpg
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/100702HE07A631-2.jpg

ITEM 004 on a G8 (not sure on GXP) also = 92138627
http://i2.photobucket.com/albums/y20/PerthPurplePenguin/car%20parts/090529HE07A800.jpg