Adam
12-05-2010, 04:59 PM
I have been working with Judah over at American Car Craft. What a great group, awesome response time, and amazing product. I ended up getting a ton of great stuff from them. Judah, helped me piece together a bunch of parts for the car. I have had about 1000 complements on the stuff since I put it on too. The quality is second to none. I could not be more pleased with how tight and accurate the fit is. I thought a few pieces would not fit because it was so close, it is just a quality build, and not that mass produced junk with a sloppy fit.
I have 3 favorite parts of the stuff I ordered so far. If you could make a wish list and start with a few parts, this is what I would recommend I think once you see the fit and finish of the product, you will come back for more. 1 section (3 pieces the diffuser grille, the valance, and the exhaust trim plates) for the rear, the interior air vents, the front vented hood panel.
I have the rear diffuser with the chrome finish around the edge. It looks awesome. With the mesh insert grille in the diffuser it really draws your attention to the entire back end. I think if you are a little tight on money you can skip the grille piece for a similar result. Reflects beautifully, and draws some attention to the bottom of the car where I think it was lacking.
The air vent surrounds look like they should be a factory option for the car. They look so cool, and give the interior a professional/sporty touch that looks more high class sports car then anything else.
The hood liner with the mirror/chrome finish is a car show pleaser. Nothing like popping the hood for someone only to have them smile and say, "that is awesome" looking at the mirror first. It use to be "this thing has a 6.0L" Now that becomes a later question. Most people stare and walk over from a distance. You really don't miss it at a car show. Cleans up under the hood so much too. Car does not run any hotter, fits like a glove and really pops under the hood.
I will be getting back with ACC about future purchases for additional goods. This test run of products could not be any better. I am telling you, you would think they came out and took measurements of your specific car to make the parts. The staff at ACC is knowledgeable, friendly, and fantastic to deal with. You can check out some pictures of the car and tell me what you think. I will answer just about any question you may have about it. The mirror trim was great, I like G8 on the products. The rear view mirror was cut a little larger then the air bag lights but still looks great. The center console cover turned out pretty nice, I did have a few issues with the inner fender covers but that was due to other aftermarket products I had under the hood. Judah helped me solve most of the issues I was having. The laser mesh stuff was perfect, and a great way to cover the black plastic kidneys and all.
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664061_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664064_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664073_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664079_large.jpg
^you can see the air vent and the mirror surround.
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664092_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664085_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664083_large.jpg
I know the shots are not the best. The car has been in the shop for a while after the car was being backed off of a tractor trailer when going to SEMA. I want to get some more up, but it may be spring since we have about 2" of snow on the ground here in Pittsburgh PA. If you need any more pice, just ask. I may be able to get more. The product looks 10 fold better in person. One of those Pictures don't do it justice kind of things.
I have 3 favorite parts of the stuff I ordered so far. If you could make a wish list and start with a few parts, this is what I would recommend I think once you see the fit and finish of the product, you will come back for more. 1 section (3 pieces the diffuser grille, the valance, and the exhaust trim plates) for the rear, the interior air vents, the front vented hood panel.
I have the rear diffuser with the chrome finish around the edge. It looks awesome. With the mesh insert grille in the diffuser it really draws your attention to the entire back end. I think if you are a little tight on money you can skip the grille piece for a similar result. Reflects beautifully, and draws some attention to the bottom of the car where I think it was lacking.
The air vent surrounds look like they should be a factory option for the car. They look so cool, and give the interior a professional/sporty touch that looks more high class sports car then anything else.
The hood liner with the mirror/chrome finish is a car show pleaser. Nothing like popping the hood for someone only to have them smile and say, "that is awesome" looking at the mirror first. It use to be "this thing has a 6.0L" Now that becomes a later question. Most people stare and walk over from a distance. You really don't miss it at a car show. Cleans up under the hood so much too. Car does not run any hotter, fits like a glove and really pops under the hood.
I will be getting back with ACC about future purchases for additional goods. This test run of products could not be any better. I am telling you, you would think they came out and took measurements of your specific car to make the parts. The staff at ACC is knowledgeable, friendly, and fantastic to deal with. You can check out some pictures of the car and tell me what you think. I will answer just about any question you may have about it. The mirror trim was great, I like G8 on the products. The rear view mirror was cut a little larger then the air bag lights but still looks great. The center console cover turned out pretty nice, I did have a few issues with the inner fender covers but that was due to other aftermarket products I had under the hood. Judah helped me solve most of the issues I was having. The laser mesh stuff was perfect, and a great way to cover the black plastic kidneys and all.
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664061_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664064_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664073_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664079_large.jpg
^you can see the air vent and the mirror surround.
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664092_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664085_large.jpg
http://carphotos.cardomain.com/ride_images/3/3381/3329/33451664083_large.jpg
I know the shots are not the best. The car has been in the shop for a while after the car was being backed off of a tractor trailer when going to SEMA. I want to get some more up, but it may be spring since we have about 2" of snow on the ground here in Pittsburgh PA. If you need any more pice, just ask. I may be able to get more. The product looks 10 fold better in person. One of those Pictures don't do it justice kind of things.