~Sale on Aeroforce Guages at New Era Performance!!!~

[Mike@NewEra]

New Era Performance will be running a sale on all aeroforce scan gauges for the next couple of weeks. No minimum orders required. We will be offering all CN and PT Series gauges for $219.95 shipped and all dual CN or PT gauges for $369.95 shipped.


Standard General Motors including Duramax diesel (pre 2006) gauge packages. Check application guide linked above for your exact model before ordering. Unlike previous generation Interceptor gauges, these current versions are universal for all GM vehicles. The user can select which parameters to view as well as customize the power up screen.

Be sure to check application guide before ordering!!!

Gauges come configured with a black face and black bezel with an included white face and polished silver bezel. Additional optional hardware such as silver face or brushed aluminum bezel can be found on our Accessories page (http://www.aeroforcetech.com/accessories.html).

**Be sure to check out our sensor kits which of course are compatible with these gauges. These sensors simply connect to the analog inputs on the back of the gauge. Click here (http://www.aeroforcetech.com/products_sensors.html) for more information!

PT Series Interceptor gauge fits most pre-2007 GM vehicles, CN series for newer CAN bus vehicles. See application guide for exact information:

Check application guide before ordering to avoid restocking fees if incorrect part number is ordered.
Click here for Application Guide (http://www.aeroforcetech.com/files/Aeroforce_application_guide_basic3.pdf)

Parameters and Features can be found here (http://www.aeroforcetech.com/files/parameters_features.pdf).

Available color options and displays:

http://www.aeroforcetech.com/images/g_images_1.jpg

http://www.aeroforcetech.com/images/g_image_2.jpg

http://www.aeroforcetech.com/images/g_image_3.jpg

http://www.aeroforcetech.com/images/g_image_4.jpg

http://www.aeroforcetech.com/images/g_image_5.jpg

http://www.aeroforcetech.com/images/g_image_6.jpg

http://www.aeroforcetech.com/images/g_image_7.jpg

http://www.aeroforcetech.com/images/g_image_8.jpg

If you have any questions feel free to respond to this thread, pm us, or use any of the contact information below.

email: Sales@neweraperformanceparts.com
Phone: (585)865-1832

Single Gauges can be purchased online here:
http://www.neweraperformance.net/default.asp?S=503&A=E&PKV=ScanGuage|0

Dual Gauges online here:
http://www.neweraperformance.net/default.asp?S=503&A=E&PKV=202|0

We can also take phone orders, or send paypal invoices.

*Be Sure to include your Year, Make, and Model to ensure we send you the correct gauge!*

[GT-610]

let me just help out Mike and say that these gauges rock! you can clear trouble codes,do 1/4 mile and 0-60 times,etc! thats also a good price!

[gr8lover]

This is a really dumb question but what else do you need to buy with these to make them sense items such as boost, A/F, and fuel pressure.... If I were to want these three things monitored, what exactly would I need to buy..... thanks

[Mike@NewEra]

This is a really dumb question but what else do you need to buy with these to make them sense items such as boost, A/F, and fuel pressure.... If I were to want these three things monitored, what exactly would I need to buy..... thanks

That's not a dumb question. Here are some of the accessories and sensors Aeroforce and ourselves have to offer. We don't currently have the accessories for sale, just the gauges.
http://www.aeroforcetech.com/accessories.html
http://www.aeroforcetech.com/products_sensors.html

Wide band O2 sensor kit for Air/Fuel ratio:
Each kit consists of a sensor, controller, steel bung, and cabling allowing you to connect directly to the Interceptor gauge. These accurate sensors use the new Bosch LSU4.9 sensor and are available at a very affordable price.

$189.00
learn more about this kit (http://www.aeroforcetech.com/products_sensors_wideband.html)

http://www.aeroforcetech.com/images/wb_sensor_thumb.jpg

Oil and Fuel pressure sensor kits:
Each kit consists of a sensor and connector/pigtail. These accurate sensors have NPT fittings, 0-5v outputs, and of course are compatible with our gauge products.

$65.00
learn more about this kit (http://www.aeroforcetech.com/products_sensors_oil.html)

http://www.aeroforcetech.com/images/sensor_thumb_fuel_100.gif

Boost/Vacuum sensor kits:
Each kit consists of a sensor and connector/pigtail. These accurate sensors are rated at 2 bar, 3.5 bar, and 7 bar (not shown).

$50.00 - $98.00
learn more about this kit
(http://www.aeroforcetech.com/products_sensors_boost.html)

http://www.aeroforcetech.com/images/sensor_thumb_2_2.jpg

5v regulated power supply
Simply connects to switched 12v and ground to supply 5v to our sensor kits. Eliminates the need to tap into other sensor lines or the PCM to obtain 5v.

$23.00

learn more about this kit (http://www.aeroforcetech.com/products_sensors_oil.html)

No picture for 5V Regulated Power Supply

Pyrometer (EGT) kits:

Thermocouple Amplifier/Linearizer
converts EGT probe output to a linear 0-5v signal for use with our gauges or other data logging equipment.

$99.97
learn more about this kit (http://www.aeroforcetech.com/products_sensors_egt.html)

http://www.aeroforcetech.com/images/sensor_thumb_4.jpg

EGT probe.
Type K thermocouple with 6' cable, 1/8" NPT fitting. Clamp on style also available.

$64.99
learn more about this kit (http://www.aeroforcetech.com/products_sensors_egt.html)

http://www.aeroforcetech.com/images/sensor_thumb_5.jpg

Temperature sensor kits:
Each kit consists of a sensor, signal conditioner, and connector/pigtail allowing you to connect directly to the Interceptor gauge. These accurate sensors are OEM units and are available for use for fluid or air temperature.

$44.95
learn more about this kit (http://www.aeroforcetech.com/products_sensors_temp.html)

http://www.aeroforcetech.com/images/sensor_thumb_6.jpg

2000 psi Nitrous Sensor
High accuracy (.5% FS) sensor with 1/8" fitting. Easily connects to the Intercetor gauge allowing you to monitor and log pressure.

$98
learn more about this kit (http://www.aeroforcetech.com/products_sensors_nitrous.html)

http://www.aeroforcetech.com/images/sensor_thumb_7.jpg

Add-A-Circuit (Pico 10A Mini fuse holder)
This handy device allows you to make one fused circuit into two. This allows you to connect power to our devices without cutting or splicing any wires, thus resulting in an easier and cleaner installation! Simply choose an existing 10A or lower circuit in your fuse block, remove the fuse, insert the add-a-circuit with existing and new fuse, and you have a new fused 12v circuit!

$5.99

http://www.aeroforcetech.com/images/sensor_thum_addcirciut.jpg