PDA

View Full Version : Need Fitment Confirmation



1meand
07-04-2010, 03:34 PM
I just need confirmation from someone other than me that these will work. 19x9.5 with a 42mm offset using a 275/35R19 tire.

1meand
07-05-2010, 06:18 AM
According to the "will it fit" thread the rims will work, but I was questioning the if the tires would work. I was pretty confident until I went to this site:
http://www.1010tires.com/WheelOffsetCalculator.asp and then I got confused.

SRG963
07-05-2010, 06:22 AM
The front at +42 will work fine, need larger offset on the rears.

TireDoc
07-05-2010, 06:28 AM
We've not done a 9.5" wide on the fronts, so can't say for sure (there are a few treads with guys using similar set ups, so try a search there). Offset looks fine as far as the rear wheels go .........

gr8lover
07-05-2010, 06:42 AM
I have the 275's with a 45mm offset.... I would think the 42mm would work.... only did my 9.5's on the rear... I wouldnt try those on the front..... just my opinoin..

1meand
07-05-2010, 07:55 AM
The ones for the front are 19x8 with a +35 offset. The 9.5 was just for the rear. I'm not going to lower it.

gr8lover: how close are you to rubbing when you have weight in the back?

SRG963
07-05-2010, 08:13 AM
I'm running staggered now, and I don't really care for it. I'm going to swap the 2 fronts to 275s soon. You may want to run 275's all around, which is possible if you get a 8.5" front wheel and +45 to +35 offset.

1meand
07-06-2010, 03:41 PM
Found a different rim that's 19x8 +40 offset front and 19x9.5 +45 offset back that I know works because someone else on one of the boards has the same rims and tires. Only problem is I can only find 1 front rim, the style in the size I want is on backorder from the maker, so I must wait. Thanks for the replies everyone.