Road Racing

[GRRRR8]

Lets here how well the G8s do on the curves or cones.
Post videos or links to them too.

[MichaelG8]

http://forum.grrrr8.net/showthread.php?t=5140
They handle awesome. My car managed .92 G on the skidpad. Completely Stock.

[00 Trans Ram]

100% stock form, 300 miles on the odometer, September 6, 2008. Ran at No Problem Raceway (soon to be The Circuit at Grand Bayou).

1:26.xxx with a passenger

Time is comparable to stock M3s.

[JVH1982]

To preface: no helmets were required for this event so I was not quite racing as my top speed was severely limited by the mostly stock RX-8 pace car (lowered suspension, upgraded brakes and tires, lightbar, and decals). That said, I was able to push most conrners fairly hard once the track started to dry. That said, the pace car was taking very "compromised" racing lines to avoid putting our qroup through the standing water sideways. So, it was closer to a parade lap than anything. Still, not bad for $50. Also, this is the last 15 min of a 24 min session, which was my second session of the day. I only paid for one session, but due to the extremely wet conditions of the earlier session, it wasn't exactly fun (I was in 4th and 5th gear for the whole first run) Both of the SS-R trucks in front of me were having traction issues and the 'Vette behind me actually spun out. Fortunately, I had no such issues. Anyhow, enjoy!

http://www.youtube.com/watch?v=1L-e6yyIL9E

[TCorzett]

I've not yet been home long enough to get my car out on the track, but here's a video from an event I tagged-along at:


Lwb1VjM_kTY

-Todd...

[JVH1982]

I've not yet been home long enough to get my car out on the track, but here's a video from an event I tagged-along at:
-Todd...Awesome video! What are you using to provide the telemetry overlays?

[2girlsdad]

I noticed two things.
1. When I sat in your passenger seat we only went in straight lines. LOL
2. Some of those corners have more "uh-oh" stripes on exit vs entry.

Thanks for posting the video.

[jzpiano]

To preface: no helmets were required for this event so I was not quite racing as my top speed was severely limited by the mostly stock RX-8 pace car (lowered suspension, upgraded brakes and tires, lightbar, and decals). That said, I was able to push most conrners fairly hard once the track started to dry. That said, the pace car was taking very "compromised" racing lines to avoid putting our qroup through the standing water sideways. So, it was closer to a parade lap than anything. Still, not bad for $50. Also, this is the last 15 min of a 24 min session, which was my second session of the day. I only paid for one session, but due to the extremely wet conditions of the earlier session, it wasn't exactly fun (I was in 4th and 5th gear for the whole first run) Both of the SS-R trucks in front of me were having traction issues and the 'Vette behind me actually spun out. Fortunately, I had no such issues. Anyhow, enjoy!

http://www.youtube.com/watch?v=1L-e6yyIL9E

Where was this at? I know the autoban has stuff but its like 300+ for the day.

Sent from my EVO 3D

[TCorzett]

Awesome video! What are you using to provide the telemetry overlays?
I have a Race-Technology DL1 data logger... basically a GPS integrated accelerometer. It provides all sorts of interesting data... the video stuff is just for fun



http://unitonestudios.com/G8/wp-content/uploads/2011/05/CntryClub007_Timing.jpg

http://unitonestudios.com/G8/wp-content/uploads/2011/05/CntryClub007_Time-Slip.jpg

http://unitonestudios.com/G8/wp-content/uploads/2011/05/CntryClub007_G-Force.jpg



Where was this at? I know the autoban has stuff but its like 300+ for the day.
That looks to be Autobahn.

-Todd...

[JVH1982]

Yes, the south circuit to be exact. This was a Bloomington Gold Blast! Expo event.

The $350 events are full day events with classroom instruction, driving instruction, and multiple heats and no pace car.

Todd, we should hook up for the upcoming Hooked on Driving event. Bill, do join us if you can. We should chat at GONE.

[jzpiano]

Yes, the south circuit to be exact. This was a Bloomington Gold Blast! Expo event.

The $350 events are full day events with classroom instruction, driving instruction, and multiple heats and no pace car.

Todd, we should hook up for the upcoming Hooked on Driving event. Bill, do join us if you can. We should chat at GONE.

Would love to do a road racing day. Would be even better if we could get a couple of g8s out there. I do have some concerns about brakes and such being able to handle it but we will definately talk at gone. Not to mention I have about 1k worth of parts that need to be installed including all the bushings and ss lines.

What day are you heading out there? A couple of us are planning to leave Friday morning.

Sent from my EVO 3D

[TCorzett]

Todd, we should hook up for the upcoming Hooked on Driving event.
I live in California, but was in the Chicago area for work. I couldn't run my car, so hooked-up my gear to another car. I will not be in the Chicago area for the next Hooked on Driving event (I'll be in Las Vegas at GoatRun).


We should chat at GONE.
I will be at GONE if you have questions. I'll bring my data logger if you want to check it out.

-Todd...

[Doug Hilliard]

Todd, just wondering, do you have any brake cooling vents installed? I'm doing an event at VIR a week from Friday and a little concerned about heat on the brakes with the hp I've added since the last event.

[TCorzett]

Todd, just wondering, do you have any brake cooling vents installed?

Nope, not yet... but I have all the parts to make something. Someday I'll actually be at home with my car for longer than two days and I'll get to all of these projects. Hell, maybe someday I'll even get my car out on the track!

I'm taking my inspiration from an install I saw on a Gen5 Camaro (http://www.camaro5.com/forums/showthread.php?p=2475584#post2475584):

http://i925.photobucket.com/albums/ad100/johnmicalizio/Brake_Plate_Driver_Closeup.jpg


I'm doing an event at VIR a week from Friday and a little concerned about heat on the brakes with the hp I've added since the last event.
From what I hear, making sure you have the right pads and fluid can make a big difference. With a car as heavy as a G8, once the driver knows what they are doing, I hear it is difficult to use a street/track (hybrid) pad.

-Todd...

[Doug Hilliard]

Nope, not yet... but I have all the parts to make something. Someday I'll actually be at home with my car for longer than two days and I'll get to all of these projects. Hell, maybe someday I'll even get my car out on the track!

I'm taking my inspiration from [URL="http://www.camaro5.com/forums/showthread.php?p=2475584#post2475584"]an install I saw on a Gen5 Camaro


From what I hear, making sure you have the right pads and fluid can make a big difference. With a car as heavy as a G8, once the driver knows what they are doing, I hear it is difficult to use a street/track (hybrid) pad.



-Todd...

OK, thanks. I am working with a local shop that does a bunch of work for road track cars and will have it in next week for a track alignment and high temp brake fluid flush. We're going to make some pics and send them to a company that's been doing some nice work with brake vents. We'll see what they come up with. Their system vents to the center of the rotors so the airflow is from inside to outside as it's designed to be. I've got track only pads for this year so we'll see how it goes! Looking forward to it!

[TCorzett]

OK, thanks. I am working with a local shop that does a bunch of work for road track cars . Their system vents to the center of the rotors so the airflow is from inside to outside as it's designed to be.
I was planning on using the stock dust shields to make something that does the same (brings air to the center of the rotors). If they are able to produce a "kit", I'd be very interested.

-Todd...

[Doug Hilliard]

I was planning on using the stock dust shields to make something that does the same (brings air to the center of the rotors). If they are able to produce a "kit", I'd be very interested.

-Todd...

The stuff they've done so far is a kit according to my shop and they've been really happy with the work. They have a kit coming in for a Mustang this week that's around $200 including the intakes that are mounted in the bumper. I'd tell you the name of the folks but I can't remember! Anyway, if it works out I'll post it up.

[r1owner]

I've got some up from my VIR trip earlier this summer here....


http://www.youtube.com/yzfr1owner

[Doug Hilliard]

I've got some up from my VIR trip earlier this summer here....


http://www.youtube.com/yzfr1owner

Very nice! What are you using for a camera setup?

[matthewo]

Nope, not yet... but I have all the parts to make something. Someday I'll actually be at home with my car for longer than two days and I'll get to all of these projects. Hell, maybe someday I'll even get my car out on the track!

I'm taking my inspiration from an install I saw on a Gen5 Camaro (http://www.camaro5.com/forums/showthread.php?p=2475584#post2475584):

http://i925.photobucket.com/albums/ad100/johnmicalizio/Brake_Plate_Driver_Closeup.jpg


From what I hear, making sure you have the right pads and fluid can make a big difference. With a car as heavy as a G8, once the driver knows what they are doing, I hear it is difficult to use a street/track (hybrid) pad.

-Todd...

I agree, after a bit of hard mountian driving my brakes got to the point I had to slow down considerbly because they felt like mush. But this is a totally stock g8 brake system.

I plan to do the 4 pot brembos up front, I'm sure that will help.

[r1owner]

Very nice! What are you using for a camera setup?

Thanks. I used an iPhone 4 running Harry's laptimer software.

[Doug Hilliard]

That's nice! I'm going to try to figure out how to mount a small camcorder if I can.

[r1owner]

Have fun at VIR such an amazing facility!

[Doug Hilliard]

Have fun at VIR such an amazing facility!
Had a great time at VIR! I was there 2 days last year but the sway bars made a big difference in the turns as well as running 255/35/18's. I ran Carbotech race pads and they were great for slowing the heavy beast down. The power adders were all that I hoped they would be; tons of torque to get out of the turns quickly and lots of top-end power for hitting 150 on the backstretch ... a fun time indeed!

[r1owner]

Nice! Post up some video!

150! Holy crap! That's Z06 territory there.

[Doug Hilliard]

Nice! Post up some video!

150! Holy crap! That's Z06 territory there.

Actually my instructor had a Z06 and it maxed out around 140! He was really impressed with the G8! Unfortunately I didn't get around to getting a way to take video. There's another event at CMP Oct 14-15 I may get to so I'll see about getting some video then if I go.

[JVH1982]

Awesome, Doug! I cannot wait until I can afford proper track time (instead of paced parade laps).

[Indypete]

My Intake, headers, tune, BMR swaybars, 09+ CTS-V brake upgraded G8 hanging with the Porsche Club at Putnam Park a few months ago.

https://www.youtube.com/watch?v=K5OlyT8UsXU&list=UUrZ21n5WQr8Kz8-5U7jz5qA

Yes I talk funny :-)

[Doug Hilliard]

My Intake, headers, tune, BMR swaybars, 09+ CTS-V brake upgraded G8 hanging with the Porsche Club at Putnam Park a few months ago.

https://www.youtube.com/watch?v=K5OlyT8UsXU&list=UUrZ21n5WQr8Kz8-5U7jz5qA

Yes I talk funny :-)
Very nice! Thanks for posting!

[travis gore]

My Intake, headers, tune, BMR swaybars, 09+ CTS-V brake upgraded G8 hanging with the Porsche Club at Putnam Park a few months ago.

https://www.youtube.com/watch?v=K5OlyT8UsXU&list=UUrZ21n5WQr8Kz8-5U7jz5qA

Yes I talk funny :-)

very nice Pete. I need to join you next year

[Indypete]

Mid Ohio and Putnam Park in April, Memphis in May, and then Putnam again in the fall :-) Make plans now:-)

Pete

[r1owner]

Anyone planning on going to the new track that the corvette museum is building with 10/10ths next year? I plan on being there in the cobalt.

[jpG8GT]

Great video! I love Putnum park. I have a lot of miles there in a Z06 and viper. I would love to get the G8 there next year.


Sent from my iPhone using Tapatalk (http://tapatalk.com/m?id=1)

[JVH1982]

Fantastic stuff, Pete. Thanks for sharing!

[travis gore]

Mid Ohio and Putnam Park in April, Memphis in May, and then Putnam again in the fall :-) Make plans now:-)

Pete

depends on when it is in April.

[Indypete]

Mid Ohio turns out to be early May, Memphis is 16th-17th. Memphis will be newly paved and will be awesome!. They shortened it down to two days so it would be easier for folks to break away and go do it. Not gonna make it to Mid Ohio, two weekends in a row is pushing my luck with the wife :-)

Sign up at http://fbody-event.org/ and convince Ray to come with us!

Lap around the track:

https://www.youtube.com/watch?v=EdJ1bUZ4g-s

[Indypete]

Went to Memphis International Raceway and did the roadcourse there. Did a couple of 1.22 runs around the track. Car now has headers, intake, cam, BMR swaybars, CTS-V V2 brake upgrade and Michelin SS tires. Topped out going 140 mph at the straight and came in 4th fastest.

https://www.youtube.com/watch?v=d_kwsgWvuaU&list=UUrZ21n5WQr8Kz8-5U7jz5qA
The black CTS-V has 680 HP at the wheels (I was there when he dynoed), I thought I did a decent job keeping up!

I took home 1st place in the "Fast improvided autoX"
https://www.youtube.com/watch?v=MNnI0l52rdI&list=UUrZ21n5WQr8Kz8-5U7jz5qA

Took home 2nd place in the regular AutoX.

This was at the NFME 2014 event last weekend. http://www.fbodyevent.org/

22368 22369

Had A LOT of fun, you guys really need to come join me next year! There i something very refreshing about blasting by 4th gen camaros and various other tricked out cars in my 4 door :brock:

Pete

[Bill Brollier]

Jolly good show amigo!

[StreetKa]

auto x

https://www.flickr.com/photos/46351784@N05/shares/4Ks5xR

https://www.youtube.com/watch?v=IAnxNvrOUI8

https://www.youtube.com/watch?v=AyXlwi8O68k

NJMP tracknight

https://www.youtube.com/watch?v=VbfYGZBMQm8

https://www.youtube.com/watch?v=0ygpamElFho go pro lift off at some point

brakes failed on the last lap - i pushed it too hard on that vette :P
https://www.youtube.com/watch?v=QPKo_fwnLLk

[Doug Hilliard]

Good lines; nice and smooth! Thanks for posting!