High Flow Cats

[RandomTech]

We've had a few inquiries about high flow cats for the G8 and we're trying to get a feel for how many people are interested. In addition to direct fit replacements for the stock converters, we're also looking at doing converters for some brands of headers. We'd be interested in your thoughts.

[GRRRR8]

Welcome! I have used your cats on a few Turbo Buicks and other projects. The big thing I see is getting rid of the restriction in the pipe that bolts to the manifold. If you want pics I have them.

[Chewy]

I'd be interested for some stock fitment to go with my M/F system if the price is reasonable.

Get rid of the 90º angle the stock ones have and we're golden!

Welcome!

[G8V8]

A hi-flow direct replacement cat that was ODB II compatable for emissions would be a good item for g8 owners in states/locations where LTH and their relocated cats are not an option.

[GRRRR8]

Being Master Certified and a performance enthusiast there is a huge market for Random Tech converters and I will gladly vouch for them on all the sites I am on.

[GRRRR8]

Here is a link to the pics:
http://www.forum.grrrr8.net/showthread.php?t=391&page=2

[Chewy]

Here is a link to the pics:



Better yet... Here's the pic itself! The culprit! :crutch:

[RandomTech]

I'd be interested for some stock fitment to go with my M/F system if the price is reasonable.

Get rid of the 90º angle the stock ones have and we're golden!

Welcome!

Thanks for the welcome. Getting rid of the 90-degree was my first thought- that has to be killing flow. As for reasonable cost, that depends on your perspective. We build everything in this country and use 304 stainless. Obviously, our stuff is more expensive than Chinese parts. On the other hand, when you call us, you'll actually get a real person who speaks English.
Until we get some prototypes put together, I can't say for sure, but judging by the photos, I'd guess we're looking at an MSRP of $340-350 per side, and a "street" price of $290-300. We don't offer group buys, because that puts us in competition with our dealers-- but if there's enough interest, we can put something together with a few of those dealers, and possibly get the price a bit lower.

[Chewy]

Thanks for the welcome. Getting rid of the 90-degree was my first thought- that has to be killing flow. As for reasonable cost, that depends on your perspective. We build everything in this country and use 304 stainless. Obviously, our stuff is more expensive than Chinese parts. On the other hand, when you call us, you'll actually get a real person who speaks English.
Until we get some prototypes put together, I can't say for sure, but judging by the photos, I'd guess we're looking at an MSRP of $340-350 per side, and a "street" price of $290-300. We don't offer group buys, because that puts us in competition with our dealers-- but if there's enough interest, we can put something together with a few of those dealers, and possibly get the price a bit lower.

Sounds reasonable to me! :first: I was guessing the 500-600 dollar range...:cheers: 500 is of course better... lol

Oh and I am all for USA parts on my AU/Mex car... lol

[GRRRR8]

Whats cheap isnt good and whats good isnt cheap! I know first hand that you make GRRRR8 products.

[SRG963]

Glad Random Techonology is on board with the G8 :)

Something to bolt up to the stock system would be GRRRR8

[RandomTech]

GRRRR8-- we really appreciate your positive words. We think we make GRRRR8 products too, but we're a little biased. Seriously, we are committed to building the best products we can. That isn't to say we haven't had an occasional complaint, but if the issue is legitimate, we address it and do what's necessary to correct it. We welcome the opportunity to work with our customers to answer questions or resolve problems-- even if those problems don't have anything to so with our products. Open, rational dialogues help everyone.

4gasem- My guess is that if enough people order converters, you'll be able to get close to the $500 mark. Of course, we won't be able to use Australian/Mexican parts at that price.

[jasonsanders1999]

I would definitely buy a set.

[SRG963]

Any progress updates?

[JMorris]

As a former owner of Random Tech products I can tell you it was a quality piece the made a seat of the pants difference in performance. This was on a 07 Honda Civic Si.

I also called you guys up about a month ago asking for you get on with it and make us some cats. So what's the hold up? Don't make me go and get the Maganaflows.........nudg, nudge......hurry up already!

How about some confirmation?

[mjduell2009]

It's the missing piece between my JBA headers and M/F exhaust. If the price is around $500-600 for stainless I think I would be in.

--Mike

[99-LS1-SS]

On the other hand, when you call us, you'll actually get a real person who speaks English.

This counts for a LOT in my opinion!! :usa2:

[Chewy]

This counts for a LOT in my opinion!! :usa2:


Yeah but does he or she have an East Indian accent? :)

LOL

Patiently waiting to see what comes of these...

Chris

[JMorris]

Not the guy I talked to. He spoke perfect English, I think they need a few buckets of motivation though!

[JMorris]

I made another call, they are on board with it. They are in Atlanta Georgia and need a car to do some test fitting. Any one in the area?

[todds87ss]

Whats cheap isnt good and whats good isnt cheap! I know first hand that you make GRRRR8 products.

Charlie, If that were 100% true, 1/2 of your mods would be crap (LOL).
I eagerly await some type of replacement cat. Bolt on to stock manifolds would be good for me...

[Chewy]

We've had a few inquiries about high flow cats for the G8 and we're trying to get a feel for how many people are interested. In addition to direct fit replacements for the stock converters, we're also looking at doing converters for some brands of headers. We'd be interested in your thoughts.

Where are we with this?

It'd be nice to know! :)

[mpostr]

I have personally been to your shop in loganville. I have also seen your comaro tuned at engineered performance and hands down random technologies products are top notch - no junk here there and worth every penny

[Chewy]

I have personally been to your shop in loganville. I have also seen your comaro tuned at engineered performance and hands down random technologies products are top notch - no junk here there and worth every penny

Get your ass down there and prod them a bit will ya?

lol

[-Ray-]

I have personally been to your shop in loganville. I have also seen your comaro tuned at engineered performance and hands down random technologies products are top notch - no junk here there and worth every penny

It's Camaro. I hadda do it before George got in here. :)

[GeorgeInNePa]

lol

[GRRRR8]

Charlie, If that were 100% true, 1/2 of your mods would be crap (LOL).
I eagerly await some type of replacement cat. Bolt on to stock manifolds would be good for me...

There is a difference between cheap and free DIY mods.

[JMorris]

I called both Magnaflow and Random AGAIN today. No word on the time frame for magnaflow but they say it's coming. Random tech still need a stock cat to build us some thing. If any one has one that they could use please call them. I'm sure you could work out some sort of deal.

[-Ray-]

I have my stock cats, but I don't recall them asking anyone for cats.

[Filterman]

If the Camaro shares the same front sub, won't it be likely to use the same manifolds and cats?

[SRG963]

Just sent another email to them. Feel free to do the same.

[JMorris]

I have my stock cats, but I don't recall them asking anyone for cats.

I don't think they have ever posted it but that is what they need/want to get it done. I dont know if they will pay shipping or offer a free set/discount. I didn't go there because I don't have any to send them. They said to go ahead and make a post requesting them. It would be nice if they would be a little more pro-active in getting this done. For now the wait continues.

[-Ray-]

I already have high flows cats, since I have American Racing header system.

[SRG963]

I already have high flows cats, since I have American Racing header system.

I'm sure they would pay shipping for your old cats.

If you have time next week, could you call them?
770-554-4242
Talk to Dave or Clay

We would all appreciate it :)

[SRG963]

We still need some stock converters to go off of.

If there is someone, please tell them to contact Dave here: dave@randomtechnology.com.

[-Ray-]

I'll give them a call. I will want mine back though.

[SRG963]

I'll give them a call. I will want mine back though.

Make sure you tell them they need to pay for shipping both ways :)

[-Ray-]

Make sure you tell them they need to pay for shipping both ways :)

I obviously won't be paying for shipping.

[JMorris]

Thanks a bunch Ray, much appreciated!

[SRG963]

Thanks for helping us out Ray.

Have you sent your stockers to Random Tech?

[mpostr]

It's Camaro. I hadda do it before George got in here. :)

u say camaro - i say comaro - ok ....... you win -

[-Ray-]

Thanks for helping us out Ray.

Have you sent your stockers to Random Tech?

I apologize I haven't done this. I'll call Random Tech in the morning and make arrangements.

[JMorris]

So what did they say?

[davtez]

Any luck?

[PerfectD3]

Ummm how long will they need them for? I could just drive up there on the weekend.

[norm8332]

Guess this never happened...oh well..