TuneTime Performance

[Matt TuneTime]

Hello G8/Camaro Board ,

I'm sure some of you have seen us in GM HighTech with our G8 #236 ] or on youtube with my car running low 12's on spray with a temp tag in the window .

Currently Our G8 has a Maggie on it and we will be pushing the hell out of it on
We are a full service facility with 4 full time technitions specializing in anything you want to make better and all gm.
Our site has listing's of product's or Vendors we deal with .

We also have an In house AWD Mustang Dyno .

We will be posting a lot of info and test results .

BTW we have a 2010 Camaro SS on order and I'm sure you'll be seeing it run very fast the day after we get it .

Thanks
Matt
732-349-7800
email
Matt@tunetimeperformance.com

[-Ray-]

Welcome Matt.

[wreckwriter]

welcome Matt!

I'm sure the members would like to see some more details on your nitrous install, I know I would :)

[Chewy]

Welcome Matt! Just wish some of you guys were close to me...:footstomp:

[-Ray-]

Welcome Matt! Just wish some of you guys were close to me...:footstomp:

You need to move! :ok:

[GRRRR8]

Welcome Matt! Yes he has 1 of the G8s that keeps me motivated.

[Matt TuneTime]

welcome Matt!

I'm sure the members would like to see some more details on your nitrous install, I know I would :) Tell me what you want to know ? We have run everything from 75 shot -175 shot the car has ran a best of 12.0 at 115 with a 125 shot and DR's spraying it right out of the hole 1.80 60ft , On monday Oct 20 spraying it in second with the 175 shot [ Mods are SLP long tubes , Stock exhaust , Vig 2800,UD pulley,stock LS2 cam [ yes dod works fine and it made 22 hp to the wheels ] on Dr's 12.198 @ 118.58 with a bad 1.88 short time .

[wreckwriter]

Did you use a kit or put it together from parts? Are you using a progressive controller? That kind of stuff, basically how would we go about putting together a similar system.

[Matt TuneTime]

Did you use a kit or put it together from parts? Are you using a progressive controller? That kind of stuff, basically how would we go about putting together a similar system. Zex everything is what we used for the LS6 , Work's very we'll and has added saftey features that will ease the Nitrous horror feelings .

[jnak]

Welcome Matt!

[done12many2]

Please forgive my ignorance to how nitrous setups work with automatic transmissions, but on my last two nitrous setups, I had a manual transmission and a NX Maximizer laptop based progressive controller.

This setup counted gears during manual shifts and closed the solenoids during the throttle lift between shifts.

How does this work with automatic shifts. I would imagine that during shifts with the G8, that the TCM is telling the ECM to pull timing, lower TPS, and maybe something else to aid the torque management. Should there be any consideration in whether or not this is happening between shift while the nitrous is still spraying?

Once again, this may be a very simple answer, but I just haven’t had to deal with it.

[Tate]

Howdy and welcome!
Tate