-
10-30-2014, 08:50 AM
#9761
VIP Member
Originally Posted by
hartigan85
Cool lookin deal... is it tough to get the heat gun in there while hoses are on the engine to tighten the clamps up?
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Charlie - GRRRR8
RIP Chris Wells - Panzer Leader
-
10-31-2014, 07:04 AM
#9762
Beyond Help
Driving the Rat back to the house today. What a great week driving a real car
2009 Panther Black Metallic "
The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so
GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed
Curt here
-
10-31-2014, 07:14 AM
#9763
Moderator
Originally Posted by
STL_G8GT
Mailing the last payment tomorrow... Title arrival imminent!!
Congrats. Mine will be paid off next month.
2009 Karma Metallic G8 GT The best gift you can give to someone is your time,because you're giving them something that you can never get back
-
10-31-2014, 09:05 AM
#9764
2009.5 MSM GXP 500ish N/A RWHP. Mods include but aren't limited to: Texas Speed 418 (6.8L) fully forged held together with ARP from top to bottom, PRC 255cc heads, Rick Crawford intake plenum, TB port, polish and tune, Roto-Fab 102mm CAI w/LS7 MAF, Kooks 1-7/8" headers wrapped with DEI, Corsa catless system, Circle D 3200 Stall, 3.45 final drive, BMR's complete street bushing kit and sway bars, Eibach Pro Kit, G-Force Axles, running on staggered VMR 710's with Bridgestone RE11 rubber. HSV triple gauge pack with Calais smokers kit mod, V6 tails, debadge/rebadge, V6 door handles, AU black door trim, Maverick Man under hood strut covers, & washer and bolt kit, fully corrected paint thanks to Adams Polishes and my hard work. Built with reliability in mind with some power for those times when you need to pass or go over a big hill. Just a poser, not a racer!
-
10-31-2014, 09:28 AM
#9765
Now it's a Party
Originally Posted by
hartigan85
Started covering my hoses. Still have a lot to do but so far I love the look.
Attachment 23656
Looks good. I tell my 19-yr-old and 17-yr-old sons to keep their hoses covered at all times.
R.I.P. Charlie
"Any man's finest hour, the greatest fulfillment of all that he holds dear, is that moment when he has worked his heart out in a good cause and lies exhausted on the field of battle - victorious." - Vince Lombardi
2009 G8 GT, MSM/Onyx, Prem, Mods: few......Dozen
-
Post Thanks / Like - 1 Thanks, 2 Likes, 0 Dislikes
-
10-31-2014, 12:24 PM
#9766
VIP Member
Bath day.....long over due.
2008 PBM G8GT, TVS1900, Rick Crawford blower cam, Kooks 1 7/8 Mids, Corsa Cat-back, CHenry Tuned, RotoFab, BP Catch Can, Pedders Lowered Touring Suspension w/ sway bars, CTS-V wheels, Brembos front/rear, in-dash GPS/Bluetooth, de-chromed
-
11-01-2014, 05:16 AM
#9767
Beyond Help
Girls will give you stuff that ajax cant take off your hose, so best keep the hose covered or else, lol
2009 Panther Black Metallic "
The Black Rat"
Current Modifications: Front end, Roof Pillars & Front top of roof has Clear Shield, Holden V8 6.0 Badges, Holden V Trunk Badge from Crazy Paul, UPR Catch Can, Corsa Exhaust & Roto Fab CAI. Spare Tire and Jack and Tinted Window's, hood scoops gutted, Poor Mans Heater Hose modification (holding up the hoses with zip ties), Painted the front dart to Panther Black.
Patrick Guerra's Tune July 12, 2010: 345 HP, 355 Torque on 87 Octane
Patrick's & Kurt's install of Kooks Long tubes 1 7/8" w/Corsa Connection Pipes
11-3-10: 362 rwhp, 372 Torque and updated engine and transmission tune.
New Engine as of 10- 5, 2011. Patrick & Kurt's tune and dyno 10-19 2011:363 rwhp, 365 Torque 93 octane.
Sounds so
GRRRR8 BECAUSE RACE CAR
7-1-14 Brembo Front Brake upgrade & Bohnam Front Splitter installed
Curt here
-
Post Thanks / Like - 1 Thanks, 0 Likes, 0 Dislikes
-
11-01-2014, 05:53 AM
#9768
Originally Posted by
texn884
Girls will give you stuff that ajax cant take off your hose, so best keep the hose covered or else, lol
Not to mention unexpected little G8's caused by leaky hoses getting fluids under someone else's hood. Cover those hoses!
Let's not even get started on tail pipes!
Sent from my XT1080 using Tapatalk
Last edited by cstmg8; 11-01-2014 at 05:55 AM.
-
Post Thanks / Like - 0 Thanks, 1 Likes, 0 Dislikes
-
11-01-2014, 07:13 AM
#9769
VIP Member
Originally Posted by
cstmg8
Not to mention unexpected little G8's caused by leaky hoses getting fluids under someone else's hood. Cover those hoses!
Let's not even get started on tail pipes!
Sent from my XT1080 using Tapatalk
Classic
2009 PBM G8 GT
Pat G 218/226 & TSP Dual 660s, ARP Bits, DSteck Tuned, Magnacharger Chrome 2300 1:1, RCR Ported/Polished TB, Blower, & L92 Heads w/ LS3 intake valves, Smith Brothers Trunion Bushing Kit, ARH 1 7/8 Magnaflow MidMuff/Solo Axlebacks, RotoFab, VaporWorx PWM 1:1 fuel system, ID1050x injectors
Mike Norris Motorsports Catchcan, AEM 30-4100, JHP Boost/Fuel Gauge Pod
TSW Nurburgring Matte Gray 18" w/Nitto 555 & 555R, Satin Black SS Brembo Fronts, BMR Trailing Arms, Pedders Sway Bars, Whiteline Bushings
Gloss Black Valve Covers, 6k HID, V6 Handles, Interior/License Plate LEDs, Debadged, Holden Black Trim, Polk Dxi, GXP diffusor, a few bits from Crazy Paul
Originally Posted by TonyKarter
Anyone who has ever worked on a car has been in your position, and sitting cross-legged on a concrete floor with a dim shop light is its own kind of hell... Chalk it up as one of the rites of passage.
RIP Charlie - GRRRR8
RIP Chris Wells - Panzer Leader
-
11-01-2014, 09:06 AM
#9770
Get Some
Originally Posted by
STL_G8GT
Cool lookin deal... is it tough to get the heat gun in there while hoses are on the engine to tighten the clamps up?
Yeah its a pain in the ass in certain places. I had to use a lighter, very carefully, to shrink a few of the clamps.
Atmospheric Acquisition
Sydney - 2009 G8 GT - Liquid Red, Onyx/Red interior, Flat Black Rally Stripes
Performance: Tuned By Me Using HP Tuners, TMS Forged 402, Ported LSA Supercharger 2.5/9.5, AIS Dual Nozzle Water/Methanol Kit, Super Chiller, ID850 Injectors, Rick C. Blower Cam, Morel Lifters, Comp Trunion Upgrade, Roto-Fab CAI, Kooks 1 7/8 Mids, Solo Mach Shorty Exhaust w/ 3.5" tips, CTS-V Torque Converter, Camaro 3.45 Diff, 6 Piston Front/4 Piston Rear Brembo Brakes, ZL1 Fuel Pump/BAP, Saikou Michi Dual Catch Cans, Spohn Trailing Arms & Toe Links, BMR Cradle & Diff Bushings, Derale Trans Cooler, SJM Line Lock.
Pictures