FS Airaid 4.5" Real Carbon Fiber Intake Elbow $125 shipped or $110 local pickup S FL

[G8eraid]

Selling a used Airaid real carbon fiber cf Airaid intake elbow from Camaro(Designed to fit models with Magnuson supercharger), will fit G8 stock airbox or aftermarket intake that has airbox/heat shield in similar location. Can also be used in many other custom applications...
It is 4.5 inch and necks down to 4.25", then the coupler included necks down to 4" to connect to the stock TB. Card style LS7 MAF must be used, metal adapter plate molded into intake.
Airaid decal removed, has some minor scrapes from normal use. No cracks etc.!

This elbow retails at $360!

Looking for $125 shipped CONUS inc. paypal fees or can be picked up locally (zip 33009 S. FL willing to travel 25mi or so) for $110

IMG_20180824_160755.jpg

IMG_20180824_160800.jpg

IMG_20180824_160805.jpg

IMG_20180824_160811.jpg

IMG_20180824_160818.jpg

IMG_20180824_160824.jpg

[mooredata]

interested in elbow, but a little nerves it will not work with my setup.

[G8eraid]

interested in elbow, but a little nerves it will not work with my setup.

What are you running, any pics?

Sent from my Pixel 2 XL using Tapatalk

[mooredata]

pic of setup

[mooredata]

I would love to get rid of this make-shift dryer vent elbow. No one from Roto-fab nor Magnuson (Heartbeat) has help me with the setup for the G8. I would pay BIG! Money for a fabricator to do it right, but I have a lot of resistance because it doesn’t fit the engineering model to make money.... well I guess I understand this but it leaves me to outsource this work. I will not outsource this outside the US.

[G8eraid]

pic of setup

I would love to get rid of this make-shift dryer vent elbow. No one from Roto-fab nor Magnuson (Heartbeat) has help me with the setup for the G8. I would pay BIG! Money for a fabricator to do it right, but I have a lot of resistance because it doesn’t fit the engineering model to make money.... well I guess I understand this but it leaves me to outsource this work. I will not outsource this outside the US.

I think the cf elbow should work on your setup(esp. since it already has the maf built in), it might require very minor trimming of the couplers. Or just move the air filter a few inches further inside the air box.
Edit: Looking at the Rotofab vs Airaid intakes I think the Rotofab box is located a bit further from the TB compared to the Airaid. Which should give you just enough room for this tube to fit...

[G8eraid]

Sold!